Yue Liu's research while affiliated with Xi'an Technological University and other places

Adjusting generator output and cutting off load can effectively solve the problem of continuous overload and disconnection of power lines caused by power flow transfer. To suppress large-scale power outages caused by overload-dominant cascading failures, a blocking method for overload-dominant cascading failures in the power grid based on source and load collaborative regulation is proposed. The shortest path algorithm was used to identify loads and generators with shorter electrical distances from overloaded lines. Under the premise of meeting the static safety constraints of the power grid, considering the regulation of generator output and the removal of interruptible loads, a multiobjective cascading failure blocking model is established with the minimum overall control cost of the system and the minimum probability coefficient of line failure. Use the NSGA-II algorithm to solve the model and obtain the optimal plan for adjusting generator output and cutting off load. Through example verification, the proposed method can effectively alleviate the phenomenon of line overload, thereby blocking the continuation of overload-dominant cascading failures.

Insulator defect detection of transmission line insulators is an important task for unmanned aerial vehicle (UAV) inspection, which is of immense importance in ensuring the stable operation of transmission lines. Transmission line insulators exist in complex weather scenarios, with small and inconsistent shapes. These insulators under various weather conditions could result in low-quality images captured, limited data numbers, and imbalanced sample problems. Traditional detection methods often struggle to accurately identify defect information, resulting in missed or false detections in real-world scenarios. In this paper, we propose a weather domain synthesis network for extracting cross-modality discriminative information on multi-domain insulator defect detection and classification tasks. Firstly, we design a novel weather domain synthesis (WDSt) module to convert various weather-conditioned insulator images to the uniform weather domain to decrease the existing domain gap. To further improve the detection performance, we leverage the attention mechanism to construct the Cross-modality Information Attention YOLO (CIA-YOLO) model to improve the detection capability for insulator defects. Here, we fuse both shallow and deep feature maps by adding the extra object detection layer, increasing the accuracy for detecting small targets. The experimental results prove the proposed Cross-modality Information Attention YOLO with the weather domain synthesis algorithm can achieve superior performance in multi-domain insulator datasets (MD-Insulator). Moreover, the proposed algorithm also gives a new perspective for decreasing the multi-domain insulator modality gap with weather-domain transfer, which can inspire more researchers to focus on the field.

Regular inspection of the insulator operating status is essential to ensure the safe and stable operation of the power system. Unmanned aerial vehicle (UAV) inspection has played an important role in transmission line inspection, replacing former manual inspection. With the development of deep learning technologies, deep learning-based insulator defect detection methods have drawn more and more attention and gained great improvement. However, former insulator defect detection methods mostly focus on designing complex refined network architecture, which will increase inference complexity in real applications. In this paper, we propose a novel efficient cross-modality insulator augmentation algorithm for multi-domain insulator defect detection to mimic real complex scenarios. It also alleviates the overfitting problem without adding the inference resources. The high-resolution insulator cross-modality translation (HICT) module is designed to generate multi-modality insulator images with rich texture information to eliminate the adverse effects of existing modality discrepancy. We propose the multi-domain insulator multi-scale spatial augmentation (MMA) module to simultaneously augment multi-domain insulator images with different spatial scales and leverage these fused images and location information to help the target model locate defects with various scales more accurately. Experimental results prove that the proposed cross-modality insulator augmentation algorithm can achieve superior performance in public UPID and SFID insulator defect datasets. Moreover, the proposed algorithm also gives a new perspective for improving insulator defect detection precision without adding inference resources, which is of great significance for advancing the detection of transmission lines.

The further identification of fault types for single line-to-ground faults (SLGFs) in distribution networks is conducive to determining the cause of grounding faults and formulating targeted measures for hidden danger treatment and fault prevention. For the six types of SLGFs generated in the actual power grid, this paper deeply studies their fault characteristics. Firstly, the classification criterion of fault transition resistance is derived by the generation mechanism of fault zero sequence voltage (ZSV). At the same time, by comparing and analyzing the same and different characteristics between faults, three criteria for fault classification are obtained. Based on the above four criteria, a multilevel and multicriteria fault classification method is proposed to judge six types of SLGFs. Then, the proposed method is verified by various fault state simulations of the distribution network model with a balanced topology and unbalanced topology. The engineering application of the method is demonstrated by the verification of actual power grid data. Finally, noise and data loss interference test results show the robustness of the method.

With the rapid development of artificial intelligence, machine vision and other information technologies in the construction of smart power plants, the requirements of power plants for the state monitoring of hydro-generator units (HGU) are becoming higher and higher. Based on this, this paper applies YOLOv5 to the state monitoring scenario of HGU, and proposes a method for rotor speed measurement (RSM) and operating state identification (OSI) of HGUs based on the YOLOv5. The proposed method is applied to the actual RSM and OSI of HGUs. The experimental results show that the Precision and Recall of the proposed method for rotor image are 99.5% and 100%, respectively. Compared with the traditional methods, the online image monitoring based on machine vision not only realizes high-precision RSM and the real-time and accurate determination of operating states, but also realizes video image monitoring of the rotor, the operation trend prediction of the rotor and the early warning of abnormal operating states, so that staff can find the hidden dangers in time and ensure the safe operation of the HGU.

With the improvement of smart grid, utilizing unmanned aerial vehicles (UAV) to detect the operation status of insulators has attracted widespread attention. The insulator defects can lead to serious power loss, damage the service life of power lines, and even result in power outages in serious cases. The small‐scale object, complex background, and limited‐number collected data make insulator defect still a challenging problem. Benefitted by the advances in deep learning, deep learning‐based insulator defects have achieved great progress in recent years. In the paper, the authors present a novel systematic survey of these advances, where further analysis about different processing stages methods is introduced: (i) insulator processing stage methods exploit the specific image pre‐processing algorithm for data augmentation and low‐level vision information extraction; (ii) defect detection stage model can locate and classify diagnosis fault with different task targets, like sequential task strategy and multi‐task strategy. In addition, the authors also review publicly available benchmark and datasets. The future research direction and open problem are discussed to promote the development of the community.

The oil in hydropower station catchment wells is a source of water pollution which can cause the downstream river to become polluted. Timely detection of oil can effectively prevent the expansion of oil leakage and has important significance for protecting water sources. However, the poor environment and insufficient light on the water surface of catchment wells make oil pollution detection difficult, and the real-time performance is poor. To address these problems, this paper proposes a catchment well oil detection method based on the global relation-aware attention mechanism. By embedding the global relation-aware attention mechanism in the backbone network of Yolov5s, the main features of oil are highlighted and the minor information is suppressed at the spatial and channel levels, improving the detection accuracy. Additionally, to address the problem of partial loss of detail information in the dataset caused by the harsh environment of the catchment wells, such as dim light and limited area, single-scale retinex histogram equalization is used to improve the grayscale and contrast of the oil images, enhancing the details of the dataset images and suppressing the noise. The experimental results show that the accuracy of the proposed method achieves 94.1% and 89% in detecting engine oil and turbine oil pollution, respectively. Compared with the Yolov5s, Faster R-CNN, SSD, and FSSD detection algorithms, our method effectively reduces the problems of missing and false detection, and has certain reference significance for the detection of oil pollution on the water surface of catchment wells.