Vishakha Grover's research while affiliated with Panjab University and other places

Current implant therapy is a frequently employed treatment for individuals who have lost teeth, as it offers functional and biological advantages over old prostheses. Concurrently, active exploration of intervention strategies aims to prevent the progression of peri-implant diseases and manage the existing peri-implant tissue damage. Indian Society of Periodontology has recognized the need for systematic documents to update the everyday clinical practice of general dental practitioners and has provided evidence-based consensus documents, namely good clinical practice recommendations from time to time to raise the oral health-related awareness and standards of oral health-care delivery across the country. The current clinical practice recommendations focused on peri-implant care to bridge the gap between academic theory and clinical practice by compiling evidence-based suggestions for preventing and treating peri-implant diseases. Twenty-eight subject experts across the country prepared these recommendations after a thorough literature review and group discussions. The document has been prepared in three sections covering peri-implant health and maintenance, peri-implant mucositis, and peri-implantitis. It will be a quick and concise reference for oral implant practitioners in patient management. The guidelines provide distinct definitions, signs, and symptoms, treatment required; recall visit specifications for plausible clinical case situations, and home-care recommendations regarding maintaining peri-implant health. The document advocates combined efforts of oral implant practitioners and the population at large with evidence-based, integrated, and comprehensive peri-implant care. By providing accessible, applicable guidance, these guidelines would empower dental professionals to uphold the well-being of implant patients and ensure the long-term success of implant therapy.

The anatomy of furcation favours the bacterial retention and makes periodontal debridement as well as oral hygiene procedures difficult. Teeth that have lost attachment to a level of the furcation are said to have a furcal invasion or furcation involved. Involvement of furcation in a multi-rooted tooth poses a very different type of clinical situation in terms of establishment of diagnosis, determination of prognosis and of course planning the treatment modality.The present study was carried out on 200 selected extracted human first and second permanent molar teeth based on a predefined criteria. Teeth with prosthetic crowns, fused or fractured roots, those not fully developed, grossly carious or heavily restored at the cementoenamel junction (CEJ) were excluded from the study. The morphology of the root trunk was recorded by measuring various dimensions of the root trunk,including furcal angle and root trunk volume was calculated by using a custom made special apparatus. The furcation areas were debrided with different types of curettes in the market in order to see how best the instrument could be maneuvered in the furcation area. The data so obtained was statistically analysed using SPSS version 22. The highest root trunk volume and the longest root trunk length were found to be in the maxillary second molar. 48.60% furcations didn’t allow instrument engagementof furcation area with standard area specific curettes. The proposal of inclusion of root trunk length (mm) is suggested in addition to classification of FI to have assess prognosis and appropriate treatment for of the involved tooth.

Aim The aim of this study was to evaluate and compare the stress distribution patterns in immediately placed and loaded conventional and customized three-dimensional (3D) printed dental implants by 3D finite element analysis. Materials and Methods Twelve 3D finite element models [Group A-3 models; Group B-9 models] with 72 test conditions which were modeled and compared from customized 3D printed dental implants [Group A] and 3 commercially available implant systems [Group B] (Straumann, Ankylos, and Astratech) using “SolidWorks”. All models were embedded in extraction socket models of the maxillary central incisor (CI) and Canine (C), Mandibular 1st Premolar. An occlusal loading by axial and nonaxial force of 100 N and 150 N at 30° and 45° was applied on the abutment using the “ANSYS” Suite. Customized 3D printed dental implant (Group A) for maxilla (Max.) CI, Max. C, and mandibular 1st premolar (PM) socket model was compared with three commercial available dental implant systems (Group B) for Max. CI, Max. C, and mandible (Mand.) 1st PM socket model to understand the stress distribution patterns. Results With increasing oblique loads, von Mises stresses were reduced for the customized group as compared to conventional implants. Increased axial loads caused proportionate increase in the stresses for both groups, yet remained under the physiologic limits in all test conditions. Higher stresses were observed in cortical bone than in cancellous bone at bone–implant contact in general. Marked reduction in von Mises stress was observed at the boundary between compact and cancellous bone. Customized 3D printed implants performed better for oblique loads and comparable for axial load stress distribution in comparison to conventional implant systems in Max. CI and C, Mand. 1st PM. Conclusion Thus, customized 3D printed implants appear a promising alternative for immediately placed immediately loaded protocols, with additional benefits in specific clinical situations.

Purpose The awkward and repetitive movements lead to tissue straining, potentially leading to painful musculoskeletal disorders (MSDs). MSDs in dentists result in work inefficiency and a reduction in work hours. A survey was conducted to assess the prevalence of MSDs amongst the dental population of interest. Methods Customized individual detail questionnaires, Standard Nordic Musculoskeletal questionnaires, and Level of Pain estimation using the Likert Scale were used to deduce the various responsible risk factors for the occurrence of MSDs in dentists. Inferential statistical analysis was done to identify the prevalence and severity of the MSDs. The Chi-Square test (95 % confidence interval) was used to identify and compare the association of risk factors involved in MSDs with the occurrence of the Effect of MSDs, the presence of MSDs, and the severity of the MSDs. Results The results of the study deduced that the dentists followed the sedentary work practices. The dentists experienced maximum discomfort in the neck region, which was accompanied by the discomfort experienced in the lower back, hands and wrists, making the upper extremity being more susceptible to the MSDs. Gender risk factors the, the prevalence of MSDs in the dentist's upper back, and the severity of pain in the upper back region showed a significant association level. Conclusion The wrist posture, the prevalence of MSDs and the severity of pain in the dentists' neck, shoulder and upper back showed a significant association level.

Members of the lactic acid bacillus group are well-known probiotics and primarily isolated from fermented food, dairy products, intestinal and gut environment of human. Since probiotics from the human source are preferred, there exists a huge repertoire of lactobacilli in the human oral cavity which could prove a much better niche to be exploited for these beneficial microorganisms. Therefore, in this study, four lactobacilli strains, including strain DISK7, reported earlier, isolated from dental plaque samples of a healthy humans were evaluated for their probiotic potential. Strains displayed 99.9% of 16S rRNA gene sequence identity with species of the genera Lactobacillus and Limosilactobacillus. All strains showed lactic acid production, tolerance to low pH and antibiotic sensitivity. Variations were observed among strains in their aggregation ability, biofilm formation, bile salt resistance and cholesterol degradation. Further, we analyzed the interaction of strains with other oral commensals and opportunistic pathogens in co-culture experiments. Isolates DISK7 and DISK26 exhibited high co-aggregation (> 70%) with secondary colonizers, Streptococcus pyogenes and Veillonella parvula, respectively, but their aggregation ability was decreased with opportunistic pathogens. Furthermore, strains showed a substantial increase in biofilm in co-culture with other Lactobacillus isolates, indicating their ability to proliferate commensal bacteria in the oral environment. These microbes continually evolve in terms of niche adaptation as evidenced in genome analysis. The highlight of the investigation is the isolation and evaluation of the probiotic lactobacilli from the human oral cavity, which could prove a much better niche to be exploited for the effective commercialization of these beneficial microbes. Taken together, probiotic properties and interaction with commensal bacteria, these isolates exhibit the huge potential to be developed as alternative bioresource agents for maintenance of oral health.

Background There is a bidirectional link between diabetes and periodontal disease. Control of active periodontal infection is an essential requisite to maintain optimal oral and systemic health in diabetic patients. The purpose of this study was to evaluate the efficacy of subgingival irrigation and powered toothbrush as home care maintenance protocol in type 2 diabetic patients with active periodontal disease compared to routine oral hygiene. Materials and Methods Forty ( n = 40) diabetic (HbA1c >7%) patients were enrolled in this parallel, examiner-blind, interventional clinical trial. Patients were randomized into two groups: Group A (sonic toothbrush and irrigation with water twice daily) or Group B (manual toothbrush and mouth rinsing with 0.12% Chlorhexidine gluconate (CHX) twice daily)). All patients received Phase I therapybefore the start of the study. Clinical parameters (plaque index [PI], gingival index [GI], oral hygiene index [OHI], pocket depth [PD], clinical attachment level [CAL], and bleeding index [BI]) were assessed at baseline, 1, 2, and 4 months. Levels of C-reactive protein (CRP), HbA1c, and interleukin (IL)-1 β were assessed at baseline and 4 months only. Verbal and written instructions were provided to each subject specific to their intervention allocation. Descriptive, parametric, and nonparametric analyses were used where appropriate. Results Sixteen ( n = 16) patients in Group A and fifteen ( n = 15) patients in Group B completed the 4-month study. Both groups showed a significant difference in BI, PD, CAL, and HbA1c from baseline to 4 months. There were no differences within groups for OHI, GI, or PI and CRP, IL-1 β. The results are based on an underpowered study due to the drop out of 9 patients reducing the number below the needed 19 patients per group based on the power analysis. Conclusion Results from this study provide information for future studies on self-care regimens for individuals living with Type 2 diabetes.

Biopolymers are organic polymers that can be treated into intricate designs with porous characteristics that mimic essential biologic components. Due to their superior biosafety, biodegradability, biocompatibility, etc., they have been utilized immensely in biomedical engineering, regeneration, and drug delivery. To obtain the greatest number of results, a literature search was undertaken in scientific search engines utilizing keywords. Chitosan is used in a variety of medical sectors, with the goal of emphasizing its applications and benefits in the clinical dental industry. Chitosan can be dissolved in liquid form and combined with other substances to create a variety of products, including fibers, hydrogels, membranes, microspheres, resins, sponges, pastes, tablets, and micro granules. Chitosan has been studied in a variety of dental applications. Chitosan is used in the prevention of caries and wear, in pulpotomy to accelerate osteogenesis in guided tissue regeneration due to its hemostatic property, and primarily to benefit from its antimicrobial activity by adding it to materials, such as glass ionomer cement, calcium hydroxide, and adhesive systems. With its antibacterial activity and biocompatibility, chitosan is leading the pack as a promising ingredient in the production of dental materials. The current review provides an update on the background, fundamentals, and wide range of uses of chitosan and its gels in dental science.

Background: Evaluation of the working postures and development of new techniques is paramount in reducing the awkward postures and occurrence of musculoskeletal disorders (MSDs). The Kinect sensor, a portable and cost-effective device, appears to be a promising alternative to study work postures. Objective: The current study aimed to evaluate the validity of Kinect against the gold-standard instrument (electro-goniometers) for body joint angle measurements. Methods: A unique software application was developed to measure the critical body joint angles for postural evaluation by using the Kinect's skeletal tracking feature. The body joint angle data of ten volunteers were measured simultaneously by both Kinect and electro-goniometers. The validation analysis was conducted in both static and dynamic domains of application. Results: Minimal variation was observed between the two techniques, and the Kinect correlated well for upper-arm joint angles of 45∘, 60∘ and 90∘; lower-arm joint angles of 30∘, 45∘, 60∘, and 90∘; straight neck position, neck joint angle at maximum possible flexion; straight trunk position, trunk bend angle at full flexion. In dynamic analysis, four out of five ICC values were > 0.75 except for the upper arm. Discrepancies in the results indicated the disapproval of Kinect for only wrist measurements. Conclusion: Results of the static and dynamic studies gave a sufficient basis to consider the Kinect tool as an alternative to contemporary posture-based ergonomic evaluation methods.

Iron is an important element for all life forms. In microbial life, it plays a significant bearing either as an important growth factor and/or cofactor for various metabolic processes in case of environmental bacteria or as a virulence determinant for many pathogenic microorganisms to affect their disease-causing ability. Microorganisms have developed a variety of modes to acquire iron from local environment. In iron scarcity conditions, many bacteria adopt specific strategies to fulfill their iron requisite and survive. Distinct genetic machinery targeted for iron uptake and utilization have been documented and have been extensively studied. Different microorganisms harbor distinct genomic islands specifically intended to accomplish the iron uptake and few have been described in detail to provide insights into this important area. The current chapter provides an update on the various microbial mechanisms of iron uptake, general aspects of bacterial genomic islands and the details of the genomic islands involved in the microbial iron uptake mechanisms.KeywordsIron uptakeGenomic islandsFerric ionSiderophoresHemeYersiniabactin