Takenori Dairaku's research while affiliated with Fukushima Medical University and other places

What is this page?


This page lists the scientific contributions of an author, who either does not have a ResearchGate profile, or has not yet added these contributions to their profile.

It was automatically created by ResearchGate to create a record of this author's body of work. We create such pages to advance our goal of creating and maintaining the most comprehensive scientific repository possible. In doing so, we process publicly available (personal) data relating to the author as a member of the scientific community.

If you're a ResearchGate member, you can follow this page to keep up with this author's work.

If you are this author, and you don't want us to display this page anymore, please let us know.

Publications (31)


Figure 2. Response of TEMPO-PAA and polycations to electrical-stimulation. Schematic depiction of the molecular and conformational responses of polyelectrolytes bearing either basic, acid, or TEMPO moieties with respect to electrical-stimuli.
Figure 4. QCM resonator frequency changes during drying of the prepared (PEI/TEMP (red), (PAH/TEMPO-PAA)n (orange), (PAMAM/TEMPO-PAA)n (blue), and (PDDA/TEMP (green) films. Surface area: 0.4 cm 2 .
Electrical Stimuli-Responsive Decomposition of Layer-by-Layer Films Composed of Polycations and TEMPO-Modified Poly(acrylic acid)
  • Article
  • Full-text available

December 2022

·

38 Reads

·

1 Citation

Polymers

Kentaro Yoshida

·

·

Tetsuya Ono

·

[...]

·

We previously reported that layer-by-layer (LbL) film prepared by a combination of 2,2,6,6-tetramethylpiperidinyl N-oxyl (TEMPO)-modified polyacrylic acid (PAA) and polyethyleneimine (PEI) were decomposed by application of an electric potential. However, there have been no reports yet for other polycationic species. In this study, LbL films were prepared by combining various polycationics (PEI, poly(allylamine hydrochloride) (PAH), poly(diallydimethylammonium chloride) (PDDA), and polyamidoamine (PAMAM) dendrimer) and TEMPO-PAA, and the decomposition of the thin films was evaluated using cyclic voltammetry (CV) and constant potential using an electrochemical quartz crystal microbalance (eQCM). When a potential was applied to an electrode coated on an LbL thin film of polycations and TEMPO-PAA, an oxidation potential peak (Epa) was obtained around +0.6 V vs. Ag/AgCl in CV measurements. EQCM measurements showed the decomposition of the LbL films at voltages near the Epa of the TEMPO residues. Decomposition rate was 82% for the (PEI/TEMPO-PAA)5 film, 52% for the (PAH/TEMPO-PAA)5 film, and 49% for the (PDDA/TEMPO-PAA)5 film. It is considered that the oxoammonium ion has a positive charge, and the LbL films were decomposed due to electrostatic repulsion with the polycations (PEI, PAH, and PDDA). These LbL films may lead to applications in drug release by electrical stimulation. On the other hand, the CV of the (PAMAM/TEMPO-PAA)5 film did not decompose. It is possible that the decomposition of the thin film is not promoted, probably because the amount of TEMPO-PAA absorbed is small.

Download
Share

Electrochemical Polymerization of Nitroxyl Radical Precursor Containing Phenol Side Chain in Aqueous Solution and Its Application to Electrochemical Analysis of Glucoseフェノール側鎖を有するニトロキシルラジカル前駆体の水溶液中での電気化学的重合とその電気化学的分析への応用

March 2022

·

2 Reads

BUNSEKI KAGAKU

This paper describes the voltammetric behavior of a TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) modified electrode prepared by the electrochemical polymerization of nitroxyl radical precursor containing phenol side chain in aqueous solution. The prepared TEMPO-modified electrode exhibits a symmetrical reversible redox wave at +0.6 V versus Ag/AgCl, which originates from the electron transfer between the phenol-polymerized layer and the electrode. Using the TEMPO-modified electrode, the anodic peak current for glucose was enhanced in a concentration-dependent fashion, showing that glucose was oxidized by the electrocatalytic effect of TEMPO. A high linear response to the glucose concentration ranging from 0.1 to 20 mmol L⁻¹ was obtained.


Chemical reduction of Ag + to Ag employing organic electron donors: evaluation of the effect of Ag + -mediated cytosine–cytosine base pairing on the aggregation of Ag nanoparticles

September 2021

·

17 Reads

·

1 Citation

Dalton Transactions

Ag+-mediated base pairing is valuable for synthesising DNA-based silver nanoparticles (AgNPs) and nanoclusters (AgNCs). Recently, we reported the formation of a [Ag(cytidine)2]+ complex in dimethyl sulfoxide (DMSO), which facilitated the evaluation of the effect of cytosine-Ag+-cytosine (C-Ag+-C) base pairing on the degree of AgNP aggregation in solution. As an aprotic solvent, DMSO was expected to dissolve the [Ag(cytidine)2]+ complex, and powerful reducing agents, such as organic electron donors. In this study, the chemical reduction of a cytidine/Ag+ system using a powerful reducing agent tetrakis(dimethylamino)ethylene (TDAE) was investigated. 1H/13C/15N NMR spectroscopic evidence was obtained to identify the iminium dication (TDAE2+), which is an oxidised form of TDAE. The results were compared with those obtained using another organic electron donor, tetrathiafulvalene (TTF), which exhibits a relatively lower reduction activity than TDAE. AgNPs prepared via redox reaction between [Ag(cytidine)2]+ and organic electron donors (TDAE and TTF) were characterised using UV-Vis spectroscopy and nanoparticle tracking analysis. It was found that the formation of C-Ag+-C base pairing inhibited the aggregation of AgNPs in solution. In addition, in the presence of cytidine, the total concentration of the AgNP solution was affected by the reduction activity of the reducing agent.


Catalysis of electro-oxidation of antibiotics by nitroxyl radicals and the electrochemical sensing of vancomycin

June 2021

·

45 Reads

·

11 Citations

RSC Advances

RSC Advances

Quantifying drug concentrations in vivo quickly and easily is possible using electrochemical methods. The present study describes the electrochemical detection of vancomycin (VCM) and other antibiotics from the current obtained using nitroxyl radicals as electrocatalysts. Nortropine N-oxyl (NNO), which is more active than 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO), a typical nitroxyl radical compound, produced greater current values for drugs with intramolecular hydroxy groups and secondary and tertiary amines. However, because the catalytic action of NNO is inactivated by primary amines in the substrate, VCM and teicoplanin with primary amines could not be detected. TEMPO was less active than NNO but not inactivated against primary amines. Therefore, electrochemical sensing of vancomycin was done using 4-acetamido-2,2,6,6-tetramethylpiperidine 1-oxyl (A-TEMPO), which has a greater oxidation capacity than TEMPO due to its electron-withdrawing groups. As a result, the current of A-TEMPO increased in the low concentration range of VCM as compared to TEMPO. This method also was able to quantify VCM in the concentration range of 10-100 μM, which is an important concentration range for drug monitoring in blood.


Fig. S1 13 C NMR titration plots of cytidine with AgNO3 in DMSO-d6. Chemical shifts of the (a) C2, (b) C4, (c) C5, and (d) C6 carbons of cytidine are plotted against the molar ratio of [AgNO3]/[Cytidine] (0-1 eq.). The concentration of cytidine is 0.5 M.
Fig. S9 Cyclic voltammograms of 60 mM cytidine/30 mM AgNO3 in DMSO containing 100 mM NaNO3 as a supporting electrolyte. Scan rate (V s -1 ) = 0.01 (brown), 0.05 (red), 0.1 (black), 0.2 (green), 0.4 (blue).
Fig. S10 H1ʹ/H5/H6/-NH2 peaks of cytidine observed in the 1D 1 H NMR spectra (500 MHz) of (a) 60 mM cytidine and (b) 60 mM cytidine/30 mM AgNO3 in DMSO-d6. The 1D 1 H NMR spectra were obtained using a JEOL ECA 500 spectrometer at 298 K with 32 scans and 16384 points for a spectral width of 15024.04 Hz.
Effect of cytosine–Ag + –cytosine base pairing on the redox potential of the Ag + /Ag couple and the chemical reduction of Ag + to Ag by tetrathiafulvalene

May 2021

·

48 Reads

·

5 Citations

Dalton Transactions

The redox properties of metallo-base pairs remain to be elucidated. Herein, we report the detailed 1H/13C/109Ag NMR spectroscopic and cyclic voltammetric characterisation of the [Ag(cytidine)2]+ complex as isolated cytosine-Ag+-cytosine (C-Ag+-C) base pairs. We also performed comparative studies between cytidine/Ag+ and other nucleoside/Ag+ systems by using cyclic voltammetry measurements. In addition, to evaluate the effect of [Ag(cytidine)2]+ formation on the chemical reduction of Ag+ to Ag, we utilised the redox reaction between Ag+ and tetrathiafulvalene (TTF). We found that Ag+-mediated base pairing lowers the redox potential of the Ag+/Ag couple. In addition, C-Ag+-C base pairing makes it more difficult to reduce captured Ag+ ions than in other nucleoside/Ag+ systems. Remarkably, the cytidine/Ag+ system can be utilised to control the redox potential of the Ag+/Ag couple in DMSO. This feature of the cytidine/Ag+ system may be exploited for Ag nanoparticle synthesis by using the redox reaction between Ag+ and TTF.


Adsorption and Release of Rose Bengal on Layer-by-Layer Films of Poly(Vinyl Alcohol) and Poly(Amidoamine) Dendrimers Bearing 4-Carboxyphenylboronic Acid

August 2020

·

39 Reads

·

3 Citations

Polymers

Phenylboronic acid-bearing polyamidoamine dendrimer (PBA-PAMAM)/poly(vinyl alcohol) (PVA) multilayer films were prepared through the layer-by-layer (LbL) deposition of PBA-PAMAM solution and PVA solution. PBA-PAMAM/PVA films were constructed successfully through the formation of boronate ester bonds between the boronic acid moiety in PBA and 1,3-diol units in PVA. When the (PBA-PAMAM/PVA)5 films were immersed in rose bengal (RB) solution, RB was adsorbed onto the LbL films. The amount of RB adsorbed was higher in the LbL films immersed in acidic solution than in basic solution. The release of RB from the LbL films was also promoted in the basic solution, while it was suppressed in the acidic solution. The boronic acid ester is oxidized to phenol by hydrogen peroxide (H2O2) and the carbon-boron bond is cleaved, so that the (PBA-PAMAM/PVA)5 films can be decomposed by immersion in H2O2 solution. Therefore, when RB-adsorbed (PBA-PAMAM/PVA)5 films were immersed in H2O2 solution, the release of RB was moderately promoted when the solution was weakly acidic.


Decomposition of Glucose-Sensitive Layer-by-Layer Films Using Hemin, DNA, and Glucose Oxidase

November 2019

·

18 Reads

Glucose-sensitive films were prepared by the layer-by-layer (LbL) deposition of poly(ethyleneimine) (H-PEI) solution and DNA solution (containing glucose oxidase (GOx)). H-PEI/DNA+GOx multilayer films were constructed using electrostatic interactions. The (H-PEI/DNA+GOx)5 film was then partially decomposed by hydrogen peroxide (H2O2). The mechanism for the decomposition of the LbL film was considered to involve a more reactive oxygen species (ROS) that was formed by the reaction of hemin and H2O2, which then caused nonspecific DNA cleavage. GOx present in the LbL films reacts with glucose to generate hydrogen peroxide. Therefore, decomposition of the H-PEI/DNA+GOx)5 film was observed when the thin film was immersed in a glucose solution. A (H-PEI/DNA+GOx)5 film exposed to a glucose solution for periods of 24, 48 72, and 96 h indicated decomposition of the film increased with the time. The rate of LbL film decomposition increased with the glucose concentration. At pH and ionic strength close to physiological conditions, it was possible to slowly decompose the LbL film at a sub-millimolar glucose concentration.


Fig. 1. Structure of NNO, AZADO, TEMPO and NHPI.
Fig. 2. Cyclic voltammograms of TEMPO (1.0 mM) in blank (control, a) and in 100 mM D-glucose (b), choline (c), and L-lactate (d) in 100 mM phosphate buffer solution (pH 7.4). The scan rate was 100 mV s −1 .
Fig. 3. Cyclic voltammograms of NNO (1.0 mM) in the absence and presence of 1.0, 3.0, 10, 30, 100 mM choline (a), D-glucose (b) and L-lactate (c) in 100 mM phosphate buffer solution (pH 7.4). The scan rate was 100 mV s −1 .
Fig. 4. Anodic peak currents in the CVs of NNO as functions of the concentration of D-glucose (•), choline (■) and L-lactate (▲) in 100 mM phosphate buffer solution (pH 7.4). The scan rate was 100 mV s − 1 . The average values of 3 electrodes with standard deviation are plotted.
Electrochemical determination of choline using nortropine-N-oxyl for a non-enzymatic system

November 2019

·

178 Reads

·

9 Citations

Sensing and Bio-Sensing Research

The electrocatalytical activity of nortropine-N-oxyl (NNO) was evaluated by cyclic voltammetry in pH 7.4 phosphate buffer solution. The anodic peak current for choline was enhanced in a concentration-dependent fashion, showing that choline was oxidized by the electrocatalytic effect of NNO. A high linear response to the choline concentration ranging from 0.1 to 10 mM was obtained. In contrast, 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO) could not oxidize choline under the same conditions. Keywords: Choline, Electrocatalytic oxidation, Nitroxyl radical, Non-enzymatic system



Electrochemical Detection of Triglycerides Based on an Enzymatic Reaction and Electrocatalytic Oxidation with Nortropine‐N‐oxyl

January 2019

·

59 Reads

·

5 Citations

Electroanalysis

This work investigated a simple triglycerides (TGs) detection method combining an enzymatic reaction, using only lipase, and the electrocatalytic oxidation of glycerol with nortropine‐N‐oxyl (NNO). Tributyrin was employed as a model TG. In this method, TGs are degraded by lipase to glycerol and fatty acids, after which the glycerol reacts with NNO. Preliminary cyclic voltammetry trials demonstrated that the anodic peak current increased along with the glycerol concentration, giving currents of 53.2 and 97.3 μA (at +0.6 V vs. Ag/AgCl) in response to 10 and 100 mM glycerol, respectively. Amperometry confirmed the same response during constant potential electrolysis at+0.6 V vs. Ag/AgCl. This behavior was also observed in a system incorporating tributyrin and lipase, with increases in current proportional to the tributyrin concentration over the range of 0.1 to 10 mM.


Citations (21)


... The third component was a single layer of polyamine adsorbed from the dispersion-in one case this was polyallylamine (purchased from Merck KGaA, Darmstadt, Germany; the resulting membrane is denoted as MK-40-M-PAH) and in the other case it was polyethylenimine (purchased from Merck KGaA, Darmstadt, Germany; the resulting membrane is denoted as MK-40-M-PEI). Polyallylamine is used for layer-by-layer assembly [39] as a component of new promising materials (such as thermo-responsive polymers with cleavage-induced phase transition [40] or coatings decomposing by application of electric potential [41]), including biomedical applications such as creation of nano-capsules for drug delivery [42] and food packaging [43]. Polyethylenimine is frequently used as a polymer carrier [44] and basis for loading of nanoparticles [45] or coating for medical applications [46]. ...

Reference:

Short-Term Stability of Electrochemical Properties of Layer-by-Layer Coated Heterogeneous Ion Exchange Membranes
Electrical Stimuli-Responsive Decomposition of Layer-by-Layer Films Composed of Polycations and TEMPO-Modified Poly(acrylic acid)

Polymers

... The Ag NP deposition can be achieved by several methods such as electrodeposition, 34,37,41 photodeposition, 35,36,42 and chemical reduction. [43][44][45] Among various techniques, electrodeposition has arisen as a promising technique for fabricating photoelectrodes due to its relative simplicity, low cost, and good dispersion, and improves interfacial deposition between the deposited layer and supporting electrode substrate. Furthermore, the most attractive feature of electrodeposition is its feasibility in terms of particle coverage density and properties related to the catalytic activity can be easily controlled by tuning the electrolyte composition, deposition time, and applied potential when compared to other Ag NP fabrication techniques. ...

Chemical reduction of Ag + to Ag employing organic electron donors: evaluation of the effect of Ag + -mediated cytosine–cytosine base pairing on the aggregation of Ag nanoparticles

Dalton Transactions

... [6][7][8] We have focused on nitroxyl radical compounds, which can work as organocatalysts, to develop electrochemical sensors. [9][10][11][12][13] Nitroxyl radical compounds, such as 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO), are used in combination with appropriate oxidants, such as NaClO, to catalyze the oxidation of alcohols in organic synthesis. 14,15) Alcohol can also be oxidized electrochemically by applying an electric potential instead of by oxidants. ...

Catalysis of electro-oxidation of antibiotics by nitroxyl radicals and the electrochemical sensing of vancomycin
RSC Advances

RSC Advances

... Thin films can have various functions through the use of such fu polymers. In particular, LbL films have been used as stimuli-responsive thin f stimuli such as pH [9], ionic strength [10], electrochemical stimulus [11,12], temp [13], sugars [14,15], and hydrogen peroxide [16]. In the case of pH and ionic streng uli-responsive thin films, the charge density of the weak polyelectrolyte functiona changes with the pH and ionic strength of the solvent. ...

Adsorption and Release of Rose Bengal on Layer-by-Layer Films of Poly(Vinyl Alcohol) and Poly(Amidoamine) Dendrimers Bearing 4-Carboxyphenylboronic Acid

Polymers

... This is due to their high electrocatalytic effect, tensile strength, chemical stability and high electron transfer rate between biomolecules and the electrode surface ascribed to the large surface area [38]. There has been little research conducted on choline oxidation using non-enzyme-based electrochemical sensors [42,44,55] which is probably due to the non-electroactive nature of choline. However, electrochemical sensors hold the possibility of detecting choline in real samples if integrated with ferromagnetic nanoparticles, which have been reported to possess an inherent enzymatic activity similar to that seen in natural peroxidase [30]. ...

Electrochemical determination of choline using nortropine-N-oxyl for a non-enzymatic system

Sensing and Bio-Sensing Research

... Using this catalyst, nonenzymatic detection of glucose and lactate under physiological conditions and electro-oxidation of amines were possible, which were difficult to achieve with TEMPO. 25,[27][28][29] First, the electrochemical responses to various antibiotics using NNO and TEMPO were compared. Low-molecular-weight compounds, such as ethambutol, acyclovir, and meropenem, were investigated (Fig. 3). ...

Electrochemical Detection of Triglycerides Based on an Enzymatic Reaction and Electrocatalytic Oxidation with Nortropine‐N‐oxyl
  • Citing Article
  • January 2019

Electroanalysis

... It was suggested to be due to the presence of the more electroactive center responsible for the anodic peak, which is the nitrogen (N) atom in the tertiary amine moiety. The oxidation mechanism was suggested according to some conclusions about the potentially electroactive centers under working conditions (Watkins and Gorrod, 1987) (Sato et al., 2018). ...

Electrochemical Oxidation of Amines Using a Nitroxyl Radical Catalyst and the Electroanalysis of Lidocaine

Catalysts

... Among ROS, H 2 O 2 boasts an extended biological lifespan and facile diffusion both within and between cells (27). Moreover, oxidative stress caused by H 2 O 2 is implicated in the pathogenesis of diverse types of disease, such as cancer, Parkinson's disease, cardiovascular disease (28). Therefore, the development of H 2 O 2 stimulus-responsive biomaterials holds promise in decreasing drug toxicity for lesions characterized by heightened oxidative stress. ...

Preparation of Hydrogen Peroxide Sensitive Nanofilms by a Layer-by-Layer Technique

... Among H 2 O 2 -sensitive moieties, phenylborate ester (PBAE) with readily modifiable structure and excellent biocompatibility represents one of the most sensitive structures to H 2 O 2 (35). Under the induction of H 2 O 2 , the carbon-boron bond undergoes oxidative cleavage, leading to irreversible decomposition of PBAE (36). Additionally, dodecanoic acid (dA) functions as a graft-reactive monomer, while dextran (dEX) is hydrophobically modified to self-assemble into nano micelles featuring a shell-core structure. ...

Preparation of Microparticles Capable of Glucose-Induced Insulin Release under Physiological Conditions

Polymers

... Recent papers have noted the important role of phosphate ions in LbL disorganization [6,7]. Three different buffers were evaluated in this work (Table 1): phosphatebuffered saline (PBS) solution was used as the reference buffer (the buffer used to model physiological conditions), Tris buffer (with the same pH and concentration but a different ionic strength), and Tris-NaCl buffer (with the usual Tris concentration found in the literature (0.01 M) with an additional physiological salt concentration (0.15 M)) [15,16]. To evaluate their formation, films were built according to different methodologies: a static film was prepared on cover glasses using the classical dip-coating method [17] and two dynamic deposition methods using capillary zone electrophoresis (CZE) and quartz crystal microbalance (QCM) ( Table 2) were used to provide complementary information. ...

Preparation of Nafion/Polycation Layer-by-Layer Films for Adsorption and Release of Insulin

Polymers