Sara Bredal Ingebretsen's research while affiliated with Norwegian University of Science and Technology and other places

What is this page?


This page lists the scientific contributions of an author, who either does not have a ResearchGate profile, or has not yet added these contributions to their profile.

It was automatically created by ResearchGate to create a record of this author's body of work. We create such pages to advance our goal of creating and maintaining the most comprehensive scientific repository possible. In doing so, we process publicly available (personal) data relating to the author as a member of the scientific community.

If you're a ResearchGate member, you can follow this page to keep up with this author's work.

If you are this author, and you don't want us to display this page anymore, please let us know.

Publications (2)


Figure 1. The principle of dual-barrier weatherproofing [5].
Figure 4. Sensor positions for Fjogstad-hus.
Figure 5. The sensor positions for Norgeshus.
Figure 7. Adaptation (right) of different criteria graphs for the onset of mould growth, collected by Gradeci et al. [16] (left). Original image used with permission. Note that the numbers (1) and (2) in the legend refer to different parts of the same curve seen in the left-side image, that correspond to the upper or lower graph depending on temperature range.
Figure 9. The measured cavity air relative humidity (RH) for the three case buildings.

+9

Microclimate and Mould Growth Potential of Air Cavities in Ventilated Wooden Façade and Roof Systems—Case Studies from Norway
  • Article
  • Full-text available

October 2022

·

82 Reads

·

7 Citations

Buildings

Sara Bredal Ingebretsen

·

·

·

Harsh climatic conditions in the Nordic countries are being worsened by climate change, which increases the moisture load on building façades. New types of defects are being observed in air cavities in well-designed and well-built wooden façades and roofs. More knowledge is required on the microclimatic conditions in air cavities and roofs, and their implications for organic growth and biological deterioration. The present study collects and presents sensor data from three buildings in Norway. Collected air temperature, air humidity, and wood moisture data are compared to mould growth criteria found in scientific literature, building physics software, and national and international standards. The data shows great differences in air cavity microclimates between the case buildings and between different sensor positions within the instrumented air cavities. Air cavity temperatures are found to be lower than exterior temperatures for a substantial portion of the time. For tall buildings, the vertical positioning of a sensor influences the data more than the orientation of the façade. All three buildings feature monitoring positions with both acceptable and critically high levels of moisture to indicate mould risk. There is great variation in the estimated risk of mould growth according to the different criteria. The study indicates that the coastal climate in the south-west of Norway presents a challenge in terms of resilient building design to avoid mould growth in the ventilated air cavity.

Download
Share

Figure 1. Climate Classification map for Nordic countries according to the Köppen-Geiger system-all cities above 100,000 inhabitants are marked (2016). Reprinted with permission from Ref. [6].
Figure 2. Illustration of the principle of two-stage weatherproofing for a façade (left) and a roof (right). Reprinted with permission from Refs. [10,11].
Overview of studies.
Cont.
Microclimate of Air Cavities in Ventilated Roof and Façade Systems in Nordic Climates

May 2022

·

859 Reads

·

14 Citations

Buildings

Accurate values for the climatic conditions in an air cavity, hereby called the microclimate, are crucial when calculating and simulating the performance of a ventilated roof and façade system. The climatic stress of its components and their mould and rot potential influence the long-term durability of the roof or façade. A scoping study is conducted to gain an overview on research and the scientific literature on the microclimate of air cavities in ventilated roofing and claddings in Nordic climates. From the body of the research literature, 21 scientific works were of particular interest, and their findings are summarized. The review shows that only a limited number of studies discuss the microclimate of air cavities. Roofs are discussed to a greater and more varied degree compared to façades and air cavities behind solar panels. However, the results cannot be compared and validated against each other to generally describe the microclimate of air cavities, as the surveyed papers approach the subject differently. This knowledge gap indicates that calculations and simulations can be performed without knowing whether the results represent reality. If the structure of ventilated roof and façade systems are only designed based on experience, it can be difficult to be proactive and adapt to future climate changes. Further studies are needed to determine the relation between the exterior climate and the air cavity microclimate, so that future climate predictions can be used to simulate the long-term performance of ventilated roof and façade systems.

Citations (2)


... For instance, the moisture content of wood elements may influence the results of ultrasonic waves, sclerometric, and resistance tests [22,25,26]. This could be especially crucial in areas with climate changes with moisture increase [27,28] and in areas with harsh conditions, such as near the sea where the moisture level is extremely high. ...

Reference:

Chapter 1 Evaluating the Condition of Exterior Wood at Feel Viana Hotel in its Initial Years of Operation for Sustainable Maintenance Planning Evaluating the Condition of Exterior Wood at Feel Viana Hotel in its Initial Years of Operation for Sustainable Maintenance Planning 2
Microclimate and Mould Growth Potential of Air Cavities in Ventilated Wooden Façade and Roof Systems—Case Studies from Norway

Buildings