Majid Rezayi's research while affiliated with Mashhad University of Medical Sciences and other places

The objective of this investigation is to introduce an innovative electrochemical biosensor that can swiftly detect HTLV-1 DNA targets without the need for nucleic acid amplification. The biosensor is equipped with a highly precise antisense DNA oligonucleotide. Additionally, we introduce a new core–shell material, CQDs@AuNPs, for the surface modification of glassy carbon electrodes. L-Cysteine is utilized as a conductive bridge to enhance the binding capabilities, electron transfer efficiency, and conductivity. The biosensor incorporates methylene blue (MB) as an electrochemical indicator with differential pulse voltammetry (DPV) technique, facilitating swift detection within a mere 20 min. Furthermore, it has been able to attain a detection limit of 0.7 aM and quantitation limit of 6 copies/µL with an impressive linear range spanning from 10 aM to 100 nM that displays a positive slope along with exhibiting a remarkably high correlation coefficient measuring at approximately 0.99. We tested the biosensor using 40 HTLV-1 DNA real clinical samples, comprising 30 positive and 10 negative samples, as determined by standard RT-PCR. The biosensor demonstrated a specificity of 96.67% and an exceptional sensitivity of 100%. Rigorous quantitative analysis and statistical techniques, including t-tests, cutoff value determination, receiver operating characteristic curves, and box diagrams, clearly differentiated between the positive and negative groups. These findings underscore the potential of our innovative biosensor as a rapid, precise, and cost-effective tool for early detection of HTLV-1, which holds promise for efficient management and control of the virus.

In this study, a straightforward electrochemical aptasensor was developed to detect sulfadimethoxine (SDM). It included a glassy carbon electrode decorated by boron nitride quantum dots (BNQDs) and aptamer-functionalized nanoporous carbon (APT/CZ). CZ was first synthesized by calcinating a zeolitic imidazolate framework (ZIF-8). Then, the electroactive dye methylene blue (MB) was entrapped inside its pores. By attaching aptamer to the CZ surface, APT/CZ acted as a bioguard, which prevented the MB release. Therefore, the electrochemical signal of the entrapped MB was high in the absence of SDM. Introducing SDM caused the conformation of aptamers to change, and a large number of MB was released, which was removed by washing. Therefore, the detection strategy was done based on the change in the electrochemical signal intensity of MB. The aptasensor was applied to detect SDM at a concentration range of 10−17 to 10−7 M with a detection limit of 3.6 × 10−18 M.

Pathophysiological, epidemiological and genetic studies convincingly showed lipoprotein(a) (Lp(a)) to be a causal mediator of atherosclerotic cardiovascular disease (ASCVD). This happens through a myriad of mechanisms including activation of innate immune cells, endothelial cells as well as platelets. Although these certainties whether or not Lp(a) is ready for prime-time clinical use remain debated. Thus, remit of the present review is to provide an overview of different methods that have been employed for the measurement of Lp(a). The methods include dynamic light scattering, multi-angle light scattering analysis, near-field imaging, sedimentation, gel filtration, and electron microscopy. The development of multiple Lp(a) detection methods is vital for improved prediction of ASCVD risk.

A poly(n-butyl acrylate)-gold-MXene quantum dots (PBA-Au-MXene QD) nanocomposite-based biosensor is presented that is modified by unique antisense single-stranded DNA (ssDNA) and uses the electrochemical detection methods of DPV, CV, and EIS to early detect miR-122 as a breast cancer biomarker in real clinical samples. This fabrication method is based on advanced nanotechnology, at which a poly(n-butyl acrylate) (PBA) as a non-conductive polymer transforms into a conductive composite by incorporating Au-MXene QD. This biosensor had a limit of detection (LOD) of 0.8 zM and a linear range from 0.001 aM to 1000 nM, making it capable of detecting the low concentrations of miR-122 in patient samples. Moreover, it allows approximately 100% sensitivity and 100% specificity for miR-122 without extraction. The synthesis and detection characteristics were evaluated by different complementary tests such as AFM, FTIR, TEM, and FESEM. This new biosensor can have a high potential in clinical applications to detect breast cancer early and hence improve patient outcomes. Graphical Abstract

A novel genosensor was developed for rotavirus specific cDNA sequence detection. The genosensor was comprised of hierarchical flower-like gold nanostructures, MXene, and polypyrrole (HFGNs/MXene/PPY) nanocomposite as a signal amplification tag, specific antisense ssDNA oligonucleotide as a recognition bioelement, and methylene blue (MB) as a redox marker. The morphological and electrochemical features of the biosensor were first tested and optimized and the high performance of the platform was confirmed in terms of sensitivity and reproducibility. Then, 20 rotavirus RNA isolated from clinical and cell-cultured samples (10 positive and 10 negative confirmed by RT-PCR and electrophoresis methods) were evaluated by the genosensor. The analysis results revealed that the genosensor is able to differentiate successfully between the positive and negative control groups. The developed genosensor for rotavirus RNA detection presented an excellent limit of detection of ∼ 0.8 aM and a determination range of 10⁻¹⁸ and 10⁻⁷ M. In addition, the ssDNA/HFGNs/MXene/PPY/GCE showed high selectivity and long-term stability of ~ 24 days. Therefore, this novel genosensor would be of great benefit for the clinical diagnosis of rotavirus. Graphical abstract

Reliable and precise quantification of 25-hydroxyvitamin D3 in clinical samples is vital because vitamin D3 deficiency lead to several disorders, such as mental illness, osteoporosis, and coronavirus disease. Herein, we report the fabrication of a novel electrochemical aptasensor using a nanocomposite, including reduced graphene oxide, pyrrole, and l-cysteine, for the sensitive detection of 25-hydroxyvitamin D3 . Subsequently, the aptamer of 25-hydroxyvitamin D3 was immobilized on the surface of the modified electrode. Differential pulse voltammetry signals were utilized for studying the binding and measurement of 25-hydroxyvitamin D3 based on the oxidation peak. Under the optimum conditions, the designed electrochemical aptasensor exhibited a linear detection range of 0.001-150 nM, with a limit of detection of 0.006 nM. Furthermore, the proposed aptasensor selectively detected 25-hydroxyvitamin D3 compared to other analogs. Moreover, this aptasensor was successfully applied for the detection of 25-hydroxyvitamin D3 in human serum samples, which were quantified by the enzyme-linked immunosorbent assay method. The acceptable recoveries of 82.67%-111.07% demonstrated that this proposed electrochemical aptasensor can be a promising alternative for clinical methods of vitamin D determination.

Since the rapid spread of the SARS-CoV-2 (2019), the need for early diagnostic techniques to control this pandemic has been highlighted. Diagnostic methods based on virus replication, such as RT-PCR, are exceedingly time-consuming and expensive. As a result, a rapid and accurate electrochemical test which is both available and cost-effective was designed in this study. MXene nanosheets (Ti3C2Tx) and carbon platinum (Pt/C) were employed to amplify the signal of this biosensor upon hybridization reaction of the DNA probe and the virus's specific oligonucleotide target in the RdRp gene region. By the differential pulse voltammetry (DPV) technique, the calibration curve was obtained for the target with varying concentrations ranging from 1 aM to 100 nM. Due to the increase in the concentration of the oligonucleotide target, the signal of DPV increased with a positive slope and a correlation coefficient of 0.9977. Therefore, at least a limit of detection (LOD) was obtained 0.4 aM. Furthermore, the specificity and sensitivity of the sensors were evaluated with 192 clinical samples with positive and negative RT-PCR tests, which revealed 100% accuracy and sensitivity, 97.87% specificity and limit of quantification (LOQ) of 60 copies/mL. Besides, various matrices such as saliva, nasopharyngeal swabs, and serum were assessed for detecting SARS-CoV-2 infection by the developed biosensor, indicating that this biosensor has the potential to be used for rapid Covid-19 test detection.