Jiahui Zhou's scientific contributions

Superhydrophobic surfaces have been extensively utilized due to their high hydrophobicity and anti-icing properties. Inspired by the shape of a cross flower, research has utilized circular arc curves and Bessel curves to design a cross flower structure model. Using 3D modeling software for modeling and 3D printing technology to prepare biomimetic microstructures in structural design. The structural shape of the microstructure before and after spray coating was detected using ultra depth of field and laser confocal microscopy. Using Ultra-Ever Dry as a low surface energy substance to alter the wettability of microstructure surfaces. Through surface wettability tests, droplet freezing, and droplet impact tests, the cross shaped biomimetic structure designed by the Bessel curve has a maximum droplet freezing time of 4193 s and a minimum droplet impact time of 9.81 ms. The experimental results indicate that the cross shaped biomimetic structure has good hydrophobicity and broad application prospects.

Zirconia (ZrO2) is a ceramic material with high-temperature resistance and good insulating properties. Herein, for the first time, the surface of ZrO2 was modified with docosanoic acid (DCA) to improve its self-cleaning and hydrophobic properties. This surface modification transformed the surface of ZrO2 from hydrophilic to superhydrophobic. A two-step spraying method was used to prepare the superhydrophobic surface of ZrO2 by sequentially applying a primer and a topcoat. The primer was a solution configured using an epoxy resin as the adhesive and polyamide as the curing agent, while the topcoat was a modified ZrO2 solution. The superhydrophobic surface of ZrO2 exhibited a contact angle of 154° and a sliding angle of 4°. Scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, thermogravimetric analysis, and other analytical techniques were used to characterize the prepared zirconia particles and their surfaces. Moreover, results from surface self-cleaning and droplet freezing tests showed that DCA-modified ZrO2 can be well combined, and its coatings show good self-cleaning and anti-icing properties on TA2 bases.

In this paper, a preparation method of superhydrophobic composites of oxidized multi-walled carbon nanotubes modified by stearic acid (SA) is proposed. Hydroxylated multi-walled carbon nanotubes (HMWCNT) were obtained by oxidizing multi-walled carbon nanotubes with potassium dichromate to give them hydroxyl groups on the surface. Subsequently, the carboxyl group in the SA molecule was esterified with the hydroxyl group on the hydroxylated multi-walled carbon nanotubes. SA molecules were grafted onto the surface of multi-walled carbon nanotubes. SA modified oxidized multi-walled carbon nanotubes (SMWCNT) superhydrophobic composites were obtained. The results show that the water contact angle (WCA) of superhydrophobic composites can reach up to 174 °. At the same time, the modified nanocomposites have good anti-icing and corrosion resistance. After low temperature delayed freezing test, the freezing extension time of the nanocomposite film is 30 times that of the smooth surface. Under strong acid and alkali conditions, the superhydrophobic nanocomposites still maintain good superhydrophobicity. The nanocomposites may have potential applications in the preparation of large-scale superhydrophobic coatings.