Giulia Magri's research while affiliated with University of Milan and other places

Drug-eluting nanoparticles (NPs) administered by an eluting balloon represent a novel tool to prevent restenosis after angioplasty, even if the selection of the suitable drug and biodegradable material is still a matter of debate. Herein, we provide the proof of concept of the use of a novel material obtained by combining the grafting of caffeic acid or resveratrol on a poly(lactide-co-glycolide) backbone (g-CA-PLGA or g-RV-PLGA) and the pleiotropic effects of fluvastatin chosen because of its low lipophilic profile which is challenging for the encapsulation in NPs and delivery to the artery wall cells. NPs made of such materials are biocompatible with macrophages, human smooth muscle cells (SMCs), and endothelial cells (ECs). Their cellular uptake is demonstrated and quantified by confocal microscopy using fluorescent NPs, while their distribution in the cytoplasm is verified by TEM images using NPs stained with an Ag-PVP probe appositely synthetized. g-CA-PLGA assures the best control of the FLV release from NP sizing around 180 nm and the faster SMC uptake, as demonstrated by confocal analyses. Interestingly and surprisingly, g-CA-PLGA improves the FLV efficacy to inhibit the SMC migration, without altering its effects on EC proliferation and migration. The improved trophism of NPs toward SMCs, combined with the excellent biocompatibility and low modification of the microenvironment pH upon polymer degradation, makes g-CA-PLGA a suitable material for the design of drug-eluting balloons.

To assure the safety and the efficacy of a medicinal product, quality and batch-to-batch reproducibility need to be guaranteed. In the case of parenteral long-acting products, the European Union (EU) and US Regulatory Authorities provide different indications, from the classification to the in vitro release assays related to such products. Despite their relevance, there are few in vitro experimental set-ups enabling researchers to discriminate among products with different in vivo behavior. Consequently, most copies are authorized through hybrid instead of generic applications. Here, we review the actual regulatory frameworks to evaluate the in vitro release tests of polymer-based long-acting parenterals to highlights the directions followed by the Regulatory Agencies in the USA and EU.'

The drying of biodegradable polymeric nanoparticles (NP) is mandatory to improve their physical and chemical stability over time. Spray- or freeze-drying can induce irreversible aggregation of NP and, therefore, the use of drying auxiliary agents is required. The ability of four grades of maltodextrins differing in dextrose equivalent (DE) (i.e. DE2, DE6, DE12 and DE38) to protect PLGA NP from stresses was studied. High Mw maltodextrin (DE2) was not functional for obtaining an easily resuspendable dried product, since it needs a prolonged time to fully hydrate. Maltodextrins at intermediate DE showed a poor ability to protect NP from irreversible aggregation probably because too sensitive to environmental variation. DE38, which did not alter ζ-potential of NP, allowed to obtain an easily resuspendable nanosuspension independently of the drying process. The effectiveness of such material was attributed to the easiness of spray-dry a low viscous solution and to the ability of substitute the water molecules’ hydrogen bonds with NP during freeze-drying.

Characterization of controlled release formulations used for intra-articular (IA) drug administration is challenging. Bio-relevant synovial fluids (BSF), containing physiologically relevant amounts of hyaluronic acid, phospholipids and proteins, were recently proposed to simulate healthy and osteoarthritic conditions. This work aims to evaluate the performance of different controlled release formulations of methylprednisolone (MP) for IA administration, under healthy and disease states simulated conditions. Microspheres differed in grade of poly(lactide-co-glycolide) and in the theoretical drug content (i.e. 23 or 30% w/w). Their performance was compared with the commercially available suspension of MP acetate (MPA). Under osteoarthritic state simulated condition, proteins increased the MPA release and reduced the MPA hydrolysis rate, over 48 h. Regarding microspheres, the release patterns over 40 days were significantly influenced by the composition of BSF. The pattern of the release mechanism and the amount released was affected by the presence of proteins. Protein concentration affected the release and the concentration used is critical, particularly given the relevance of the concentrations to target patient populations, i.e. patients with osteoarthritis.

Full dataset used to evaluate the spray-drying process parameters on the preparation of a micronized powder made of maltodextrin (MDX) is herein reported. The process parameters (namely, feed flow rate (FFR); inlet temperature (T in ); nozzle pressure (P N ); noozle diameter (D N ) and difference of pressure between cyclone and chamber (ΔP)) were screened through a Central Composite Design (2 ⁵⁻¹ ; 2 ∗ 5; n C =2) using the following responses: product yield, powder size and size dispersity (span) and the outlet temperature of the exhausted air (T out ). Data indicate that, in the considered range, only the product yield and the powder median diameter were influenced by the process. The product yield progressively increased on increasing inlet temperature and decreasing the amount or the size of droplets to be dried. The powder median diameter was positively influenced only by the nozzle diameter. This data presented in this article completes a wider work related on “Maltodextrins as drying auxiliary agent for the preparation of easily resuspendable nanoparticles” (Magri et al., 2019).

The development of mitochondria-targeting cell permeable vectors represents a promising therapeutic approach for several diseases, such as cancer and oxidative pathologies. Nevertheless, access to mitochondria can be difficult. A new hybrid material composed by poly(lactide-co-glycolide) (PLGA) functionalized with a 6-mer mitochondria penetrating peptide (MPP), consisting in alternating arginine and unnatural cyclohexylalanine, was developed. Circular dichroism, FT-IR and DSC studies indicated that the conjugation of the peptide with the polymer led to the obtainment of a more rigid material with respect to both PLGA and MPP as such. In particular, a conformational rearrangement to a helical structure was observed for MPP. MPP-PLGA conjugates were used for the preparation of nanoparticles that showed no cytotoxicity in MTT assay, suggesting their putative use for future studies on mitochondria targeting. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.