Access to this full-text is provided by De Gruyter.
Content available from Open Archaeology
This content is subject to copyright. Terms and conditions apply.
Research Article
Eszter Solnay*
Everything Has a Role to Play:
Reconstruction of Vessel Function From Early
Copper Age Graves in the Upper Tisza Region
(Eastern Hungary)
https://doi.org/10.1515/opar-2022-0282
received July 1, 2022; accepted January 23, 2023
Abstract: Investigation into the utilitarian function of mortuary vessels is often a neglected aspect of
ceramic examination. Since, in most cases, a direct link can be assumed between the vessels’size, form,
and most optimal utilitarian function, morphometry-based ceramic categories –along with ethnoarchaeo-
logical examples –can help to understand the role of these vessels in funerary contexts. This article focuses
on the relationship between the utilitarian function of ceramics and their roles in graves through the
analysis of eight Early Copper Age (4400/4300–4000/3900 BC)burial sites, associated with Tiszapolgár
and Bodrogkeresztúr ceramic styles, from the Upper Tisza Region (Hungary). The deposition of ceramic
assemblages in graves became common in this period; however, a systematic analysis of their function has
never been carried out before. In this study, a morphometry-based methodology was developed to establish
the vessels’utilitarian function. These functions were considered in the analysis of the composition of
mortuary assemblages, and how they may reflect social status or gender roles of the deceased individual.
Results indicate that the Tiszapolgár and Bodrogkeresztúr assemblages cannot be unequivocally distin-
guished from each other based on morphometric and functional criteria, suggesting similar functional roles
in the past funerary contexts.
Keywords: morphometric analysis, vessel function, mortuary traditions, Great Hungarian Plain, Early
Copper Age
1 Introduction
The relationship between the form, size, and function of ceramic vessels represents one of the key corner-
stones of archaeological thought (Boudreaux, 2010, p. 8; Braun, 1983, p. 108; Kramberger, 2015, p. 233; Rice,
1987, p. 208; Skibo, 1992, p. 36; Van der Veen, 2018); however, the exact use of ceramics cannot be
ascertained based simply on this assumption. To better understand the exact use of a certain vessel
type, the difference between the intended and the actual function needs to be clarified (Figure 1). According
to James M. Skibo and Michael B. Schiffer, the intended function is a mental image of a particular ceramic
vessel –and its use –the potter creates the vessel based on this image, which could be social, ideological, or
utilitarian (Skibo, 1992, pp. 34–35; 2013, p. 3; Skibo & Schiffer, 2008, pp. 4, 11). The social function
* Corresponding author: Eszter Solnay, Institute of Archaeological Sciences, Eötvös Loránd University, MTA-ELTE Lendület
“Momentum”Innovation Research Group, Múzeum krt. 4/a, 1088, Budapest, Hungary; Paris 1 Panthéon-Sorbonne University,
Doctoral School of Archaeology, 3 rue Michelet, 75006, Paris, France; UMR 8215 Trajectoires, 9 rue Malher, 75004, Paris,
France, e-mail: soleszter96@student.elte.hu
Open Archaeology 2023; 9: 20220282
Open Access. © 2023 the author(s), published by De Gruyter. This work is licensed under the Creative Commons Attribution 4.0
International License.
communicates social phenomena in the framework of a specific activity or performance (Skibo & Schiffer,
2008, p. 110). The ideological function reflects ideas, values, or knowledge symbolised by vessels (Skibo &
Schiffer, 2008, p. 110). The utilitarian function expresses the optimal use of vessels –for example, for
cooking or transporting liquid (Santacreu, Trias, & Rosselló, 2017; Sinopoli, 1999; Skibo, 1992, 2013; Skibo &
Schiffer, 2008). This can be identified by the examination of the vessels’morphometry (i.e. the form and the
size), along with the additional elements –such as handles –manufacturing techniques and decoration
(Read, 2007; Rice, 1987, p. 207; Skibo, 2013, p. 29).
However, the intended function does not always correspond to the actual function, i.e. the way(s)how
the ceramic vessel was actually used by people (Abbink, 1999, p. 163; Rice, 1987, p. 211; Skibo, 1992, p. 33;
2013, p. 4). The actual function of a particular pot can be wide ranging, until it reaches a stage when it is no
longer able to contain foods or liquids. At this point, it may either be deposited or reused, as temper for
instance, or discarded altogether (Skibo, 1992, pp. 42–45). The actual function of a vessel could be clarified
by scientific testing, such as residue (e.g. Barnard & Eerkens, 2017; Craig et al., 2003; Fanti et al., 2018;
Heron & Evershed, 1993; Hoekman-Sites, 2011)and use-wear analyses (e.g. Banducci, 2014; Debels, 2018;
Fanti et al., 2018; Vieugué, 2014; Vieugué, Mirabaud, & Regert, 2008); however, the re-assessment of the
circumstance of discovery and contextual descriptions can also be helpful in this regard.
The vessels which were deposited and later found in situ in unique archaeological contexts, such as in
ritual depositions or graves, imply that these pots could have had a distinguished or special function, at
least in the final phase of their lives (Skibo, 2013,p.5). The deposition of ceramic vessels in such unique
contexts could potentially alter the vessels’intended function, but even in these special circumstances, pots
retain some of their original functions, such as their utilitarian function, which could explain why these
vessels were deposited in burials in the first place. Combining the observations on ritual and mortuary
contexts, and the morphometric examinations carried out on the ceramic assemblages, several aspects of
the intended and actual function of the vessels could be distinguished.
Although the functionality of potteries is not a clear concept and vessels could have had multiple
usages during their life span (Gosselain, 1992; Kempton, 1981; Longacre, Xia, & Yang, 2000; Rice, 1987, p. 29),
general tendencies can be described between the form, size, and function since the basic morphometry of
potteries is not accidental but related to some functional idea (Fowler, 2006, pp. 104–106; Kramberger, 2015;
Rice, 1987, p. 208; Skibo, 1992). Formerly, a number of studies had demonstrated that the utilitarian function
of ceramic vessels can be outlined by taking a closer look at the vessels’morphometry (Fowler, 2006, p. 116;
Santacreu et al., 2017, p. 189; Sinopoli, 1999, p. 126; Skibo, 1992, p. 36). Ethnoarchaeological research has
played a key role in establishing the morphometric-based ceramic categories (Hally, 1986; Henrickson &
McDonald, 1983; Smith, 1986, 1988). In these works, first, an overall vessel typology was established on the
basis of anthropological examinations, before the usage of vessels was discussed in archaeological contexts.
Figure 1: The intended, actual, and distinguished or special function of the vessels.
2Eszter Solnay
Initially, Marion F. Smith defined three basic determining factors for form and size: (1)the relative openness
of the vessel’s profile, (2)the absolute diameter of the rim, and (3)the total volume of the vessel based on the
absolute height and diameter of the body. However, other analyses demonstrated the volume being the
poorest predictor compared to the other two factors (Smith, 1988, pp. 914–915). This suggests the vessel’s
form and openness to be the key elements in determining the utilitarian function of ceramic pots.
Through the morphometric review of ceramic vessels, four broad function categories could be outlined:
(1)storage, (2)transport, (3)processing, and (4)serving/eating (Orton, Tyers, & Vince, 1993, p. 217; Rice,
1987, p. 208). However, in the case of burials, a slightly modified system of classification is required
considering the partial change to the vessels’intended function.
The aim of this article is to develop a morphometry-based methodology to examine the utilitarian vessel
function in the context of burials based on an Early Copper Age case study from the Upper Tisza Region on
the northern fringes of the Great Hungarian Plain (Eastern Hungary). The morphometry-based utilitarian
function analysis of mortuary ceramics is particularly relevant in this period, when a new social and ritual
system emerged, along with the appearance of multiple ceramic styles (Bognár-Kutzián, 1963, 1972; Par-
kinson, 2006a,b; Parkinson & Gyucha, 2007; Raczky, Anders, & Siklósi, 2014; Raczky & Siklósi, 2013; Siklósi
& Szilágyi, 2021). Formerly, over-detailed ceramic typology hindered the recognition of the utilitarian
function of these vessels and, therefore, the understanding of why these potteries were deposited in burials.
Thus, the present study has the virtue of being the first to analyse the functional patterns in the selection of
vessels for mortuary purposes during the Early Copper Age through the statistical examination of simplified
geometric forms of ceramics.
2 Background to the Case Study
The Early Copper Age signalled the beginning of a new era on the Great Hungarian Plain: a new techno-
logical and social system was emerging out of the traditions of the Late Neolithic Tisza-Herpály-Csőszhalom
complex. This, for example, included the establishment of a dense network of small-sized settlements
(Parkinson, 2006a, 2006b; Parkinson & Gyucha, 2007; Sherrat, 1982, 1983a,b)and the first appearance of
formal cemeteries (Bognár-Kutzián, 1963, 1972; Raczky et al., 2014; Raczky & Siklósi, 2013; Siklósi & Szilágyi,
2021)–while at the same time, the tradition of burial depositions continued at settlement sites as well
(Gyucha, 2015; Parkinson, Gyucha, & Yerkes, 2021; Raczky et al., 2014; Szilágyi, 2015). Although the mortuary
practice of gender specific burials dates back to Late Neolithic (Anders & Nagy, 2007), this particular funerary
custom only became fixed and normative during the Early Copper Age: women were placed on their left side
and men on their right, both in a crouched position (Bognár-Kutzián, 1963; Chapman, 2000; Kadrow, 2010;
Lichter, 2001; Meisenheimer, 1989; Raczky et al., 2014; Sofaer Derevenski, 1997).
Until recently, the Early Copper Age on the Great Hungarian Plain has been associated with the so-
called Tiszapolgár culture, followed by the Middle Copper Age Bodrogkeresztúr culture (Banner & Bognár-
Kutzián, 1961; Bognár-Kutzián, 1963, 1972, 1985; Kalicz, 1958; Patay, 1961, 1974). In the 1960s–70s, the
Tiszapolgár and the Bodrogkeresztúr cultures were identified and came to be treated as separate entities,
mostly on the basis of detailed ceramic typologies drawn from cemeteries (Bognár-Kutzián, 1963, 1972;
Patay, 1961, 1974). By the 1990s, calibrated radiocarbon dates reinforced their absolute chronology and
their chronological succession (Raczky, 1995). However, the recent AMS data and Bayesian modelling
carried out at a number of Tiszapolgár and Bodrogkeresztúr sites imply the partial contemporaneity of
the two cultures, dating both of them to the Early Copper Age (Raczky & Siklósi, 2013; Siklósi et al., 2022;
Siklósi & Szilágyi, 2016, 2021). Although the Tiszapolgár culture still appears to date to a slightly earlier
period (from 4435 (68.2%)4385 cal BC to 4220 (68.2%)4165 cal BC)than the Bodrogkeresztúr culture (from
4400 (68.2%)4325 cal BC to 4020 (68.2%)3930 cal BC)(Siklósi & Szilágyi, 2021, p. 35). The most recent
ceramic stylistic analysis assumes high levels of homogeneity among the domestic assemblages of the two
cultural groups (Szilágyi, 2016); therefore, currently, many experts call for the term ‘ceramic style’instead
of ‘culture’(Raczky et al., 2014; Raczky & Siklósi, 2013; Siklósi & Szilágyi, 2016, 2021; Szilágyi, 2016).
Everything Has a Role To Play 3
The majority of studies that dealt with the ceramic grave goods of Early Copper Age burials applied a
typological approach, fully developed by Bognár-Kutzián (1963, 1972)and Patay (1961, 1974)in the
1960s–70s (Figure 2a). These works published in the past decades only put forward generic, largely
Figure 2: Categorisation of the Early Copper Age vessels: (a)typological categories; (b)morphometrical categories (with
sematic images using simplified geometric forms); and (c)morphologic categories (with sematic images using simplified
geometric forms).
4Eszter Solnay
typological statements regarding the composition of Tiszapolgár and Bodrogkeresztúr burial assemblages.
The so-called ‘milk jugs’–upon which the definition of the Bodrogkeresztúr culture as a whole was
determined previously –represent the leading ceramic type of the Bodrogkeresztúr culture (Hillebrand,
1927). Milk jugs generally occur in graves along with a few cups and/or bowls (Lichter, 2001, p. 332; Patay,
1974, p. 21). The Tiszapolgár style graves are characterised by a large quantity of pottery (Lichter, 2001, pp.
280–281)and the presence of vessels with hollow-pedestals (Bognár-Kutzián, 1963, 1972). Moreover, some
vessel types were defined as ‘non-culture-specific’ceramics –like the flowerpot-like vessels or storage jars
–due to their occurrence in both Tiszapolgár and Bodrogkeresztúr burials (Bognár-Kutzián, 1963, pp.
241–244, 271–275; 1972, pp. 121–122; Patay, 1974, p. 29), as well as the lack of distinctive decoration styles.
However, these generalisations and complicated ceramic typologies often hinder the recognition of the
utilitarian function and make it difficult to compare the two ceramic assemblages. Therefore, a more general
ceramic classification was required to analytically recognise the utilitarian function and to better under-
stand the Tiszapolgár and Bodrogkeresztúr mortuary practices.
There have been a number of works published on the function of the Early Copper Age ceramic grave
goods. The study carried out by Meisenheimer (1989)analysed the functions of ceramics that occurred in
the 155 Early Copper Age graves of Tiszapolgár-Basatanya cemetery, where both the Tiszapolgár and the
Bodrogkeresztúr styles can be found (Bognár-Kutzián, 1963). However, contrary to the approach of the
present article, Meisenheimer worked out a detailed typochronology for the burials –similarly to Bognár-
Kutzián’s pioneering study –upon which she was able to outline the two cultural phases of the cemetery.
Meisenheimer analysed the ceramic functions of the two periods separately within the framework of her
detailed typology and focused on the general function of the ceramic offerings, instead of defining the
function of each vessel type (Meisenheimer, 1989, pp. 30–32). More recently, István Zalai-Gaál published
his results on the metric examination of the ceramics dating to the Early Copper Age, similarly what the
present article is set out to achieve. However, in the centre of his study was the comparison of the vessels of
Tiszapolgár and Bodrogkeresztúr style and metric examinations were used for the purpose of chronological
questions, not to understand the composition of ceramic assemblages in the graves and past mortuary
practices (Zalai-Gaál, 2016). Therefore, the reconstruction of the composition of ceramic assemblages and
the assessment of the vessels’utilitarian function in Early Copper Age burials are yet to be completed.
Therefore, the aim of the present case study is to examine the morphometric similarities and differences
between the Tiszapolgár and the Bodrogkeresztúr ceramic styles, along with a closer look at the possible
reconstructions of burial assemblages, and the utilitarian functions of ceramics within these, followed by a
discussion of possible selection patterns reflected by Early Copper Age burials. In this way, the article
attempts to shed more light on why exactly certain vessels were selected for mortuary purposes and, thus,
the similarities and differences between the functions of ceramics that accompanied the Tiszapolgár and
the Bodrogkeresztúr graves.
3 Case Study
The case study area is situated in the Upper Tisza Region in Northeast Hungary, along the northern fringes
of the Great Hungarian Plain, with a focus on eight cemeteries and grave clusters with fully published
ceramic material concentrating within a radius of 50 km (Figure 3).
3.1 First Group of Selected Sites
Within the remits of this article, four (major)undisturbed and published (including the metric data on
ceramics)Early Copper Age cemeteries or grave clusters (all situated away from the settlements)were
examined: (1)Tiszapolgár-Basatanya (Bognár-Kutzián, 1963),(2)Tiszavalk-Kenderföld (Patay, 1978b),(3)
Everything Has a Role To Play 5
Polgár-Nagy-Kasziba (Solnay, 2018), and (4)Tiszabábolna-Szilpuszta (Hillebrandt & Patay, 1977, pp.
41–47). The analysis included only undisturbed burials and well-preserved vessels whose form and size
can be reconstructed. The morphometric examination is primarily based on the published metric data
occasionally along with photographs (Supplement File 1).
Tiszapolgár-Basatanya represents one of the most thoroughly studied Early Cooper Age burial grounds
in Hungary, excavated between 1950 and 1954. The site is located on the area of the so-called Polgár Island
(Raczky et al., 2014, p. 323, Figure 4)between the Selypes Stream and the Szandalik Canal. The cemetery
containing 156 graves served as a basis for outlining the Early Copper Age ceramic typochronology in
the region. At the Tiszapolgár-Basatanya site, both Tiszapolgár and Bodrogkeresztúr style graves were
identified, as well as the transitional graves (i.e. representing the transition between the two styles)
(Bognár-Kutzián, 1963). Most recent chronological examinations show that the cemetery was established
after 4420–4280 cal BC and was utilised until 4040–3910 cal BC (Raczky & Siklósi, 2013, p. 566). For this
article, altogether 90 burials along with 417 vessels were selected for analysis.
Tiszavalk-Kenderföld, another Early Copper Age burial ground, is located on the western bank of the
Nyárád Stream. Although a large part of the site was presumably demolished (Patay, 1978b,p.7), altogether
54 graves were excavated between 1966 and 1967. The burials were furnished with Bodrogkeresztúr style
grave-goods (Patay, 1978b). 30 burials with 90 vessels were deemed suitable for examination.
At Polgár-Nagy-Kasziba, a group of four Early Copper Age graves with Tiszapolgár style vessels (Raczky
et al., 1997; Solnay, 2018)was excavated in 1996 (Hajdú & Nagy, 1999, p. 149). The site is situated on Polgár
Island (Raczky et al., 2014, p. 323, Figure 4), on the eastern bank of the Kengyel Stream. It can be assumed that
the grave group was part of a larger –so far uninvestigated –cemetery (Raczky et al., 1997, p. 47).Mostrecent
studies estimate the establishment of the site to 4520 (68.2%)4360 cal BC until 4335 (68.2%)4180 cal BC
(Siklósi & Szilágyi, 2021, p. 16). Three of the burials with 27 vessels were selected for further investigations.
The site of Tiszabábolna-Szilpuszta, located near the Szili Canal, was excavated in 1974 and 1976.
During the excavations, seven Tiszapolgár burials were found. It can also be presumed that the graves
belonged to a larger –but now destroyed –cemetery (Hillebrandt & Patay, 1977, pp. 41–47). Four burials
were included in the analysis along with 18 ceramic grave-goods.
Figure 3: Location of the analysed sites: (1)Tiszapolgár-Basatanya; (2)Tiszavalk-Kenderföld; (3)Polgár-Nagy-Kasziba, (4)
Tiszabábolna-Szilpuszta, (5)Tiszavalk-Tetes, (6)Szabolcs-Kisfalud, (7)Szihalom-Sóhajtó, and (8)Szihalom-Pamlényi-tábla.
6Eszter Solnay
At these four selected sites, the sample size of both the Tiszapolgár and the Bodrogkeresztúr style
ceramics were approximately equal, making the comparison between the two mortuary practices possible.
The statistics for the study were generated by the PAST 3.21 software (Hammer, Harper, & Ryan, 2001).
3.2 Second Group of Selected Sites
Furthermore, four additional burial grounds and grave clusters were included in the present case study: (1)
Tiszavalk-Tetes (Patay, 1978a),(2)Szabolcs-Kisfalud (Ecsedy, 1977),(3)Szihalom-Sóhajtó (Marton & Patay,
2004; Szabó, 1997), and (4)Szihalom-Pamlényi-tábla (Marton & Patay, 2004; Váradi, 1997). The ceramic
metric data have not been fully published from these sites; therefore, the examination and the identification
of the vessels were based on the previously defined morphometric categories along with photographs and
descriptions (Supplement File 2). The analysis of these additional four cemeteries and grave groups aims to
refine the picture outlined by the four initially investigated cemeteries (with larger grave counts)to better
understand the practice of mortuary ceramic offerings in the Upper Tisza Region in Hungary.
The burial ground of Tiszavalk-Tetes contained 25 Early Copper Age graves with Bodrogkeresztúr style
vessels. The site located on the bank of the Tetes Stream was excavated between 1968 and 1975 (Patay,
1978a). Along with the burials, two Early Copper Age pits were also discovered (Patay, 1979). Most recent
chronological studies estimate the beginnings of the burial ground to around 4490 (68.2%)4230 cal BC
until 4315 (68.2%)4030 cal BC (Siklósi & Szilágyi, 2021, p. 23). For this article, 17 burials with 84 vessels
were selected for analysis.
Szabolcs-Kisfalud, an Early Copper Age grave cluster, is situated on the bank of an old meander of the
Tisza River, where 10 Tiszapolgár burials were found during an archaeological investigation between 1971
and 1972 (Ecsedy, 1977). Three of them with 11 vessels were suitable for examination.
The two Early Copper Age sites of Szihalom-Sóhajtó and Szihalom-Pamlényi-tábla were excavated
between 1995 and 1997, in the vicinity of Szihalom. At Szihalom-Sóhajtó, 56 Bodrogkeresztúr burials and
a settlement were unearthed (Marton & Patay, 2004; Szabó, 1997), while at Szihalom-Pamlényi-tábla, a
single Bodrogkeresztúr grave (Marton & Patay, 2004; Váradi, 1997)was discovered separated only by a
shallow depression from the previous site, which flooded periodically (Marton & Patay, 2004, p. 294; Szabó,
1997, p. 54). Contrary to the other sites, Szihalom-Sóhajtó and Szihalom-Pamlényi-tábla have not been fully
published yet; therefore, only the two known graves –one from each site –with nine vessels are included in
the analysis.
4 Methods
The methodology for this analysis involved two steps (Figure 2). First, the vessels’simplified geometric
forms were determined to establish the basic morphological categories for the analysis of the graves’
ceramic composition (Figure 2b). The second step included the metric analysis of the established morpho-
logical categories to draw up morphometric groups, from which the utilitarian function of certain vessel
types can be inferred (Figure 2c). Finally, the morphological composition of the graves was re-examined
with regard to ceramics, in the light of the metric analysis, to gain a better insight into Early Copper Age
funerary practices.
To determine the simplified geometric form of burial ceramics, eight metric measurements were
recorded on each vessel (Figure 4):(1)the absolute height of the entire vessel, (2)the height of the bowl
part (for pedestalled vessels, this value is different from the absolute height),(3)the diameter of the rim, (4)
the diameter of the base (for pedestalled vessels, the base diameter of the bowl part),(5)the height of the
neck, (6)the maximum width of the body, (7)the height of the pedestal, and (8)the diameter of the pedestal
(Martinez-Carrillo & Barcelo, 2017, p. 589; Read, 2007, pp. 230–239). Since the main focus was to simplify
Everything Has a Role To Play 7
the over-detailed traditional typology by defining the primary geometric form of vessels, restricted and
unrestricted forms were not divided if the basic geometric form was similar (for example, between vessels
called conical and biconical bowls in traditional typology). For neckless potteries, the maximum width of
the body generally differs from the diameter of the rim by only a few centimetres. Therefore, the definition of
the maximum width of the body was considered irrelevant in the case of these vessels.
Following the methodological steps described by Read (2007, pp. 228–240)and Kramberger (2015,
p. 233), the vessels were divided into neckless variants and types with necks in the first round of examina-
tions and were analysed separately. Then, following the method by Prudence Rice, the neckless variants
were compared in a scatter plot by the ratio of their rim diameter and the height of their bowl-part (Figure 5)
(Rice, 1987, pp. 215–216). According to this, two groups could be identified; the shallow (rim diameter ≥
bowl-part height)and the deep (rim diameter <bowl-part height)vessels. In contrast, vessels with necks
could not be examined by these parameters, because the height of the bowl-part is always larger than the
rim diameter, as well as the maximum width of their body (Figure 6). Therefore, the vessels with necks
cannot be separated only by these ratios. Finally, to determine the simplified geometric forms of the
ceramics, the pedestalled vessels and the vessels without pedestals had to be separated in each previously
defined category (i.e. to shallow and deep vessels and vessels with necks). As a result, six simplified
geometrical categories were established (Figure 2);(1)shallow neckless vessels (A1 =without pedestal,
A2 =pedestalled),(2)deep neckless vessels (B1 =without pedestal, B2 =pedestalled), and (3)vessels with
necks (C1 =without pedestal, C2 =pedestalled). However, the quantity of the deep neckless pedestalled
vessels (B2)and the pedestalled vessels with necks (C2)is low. Based on these categories, the ceramic
morphological composition of burials was examined at each site, using a series of correspondence analyses
and Kernel density estimations, where the number of burials allowed it.
The morphological analysis was followed by the metric examination of the simplified geometric form
categories aided by scatter plots and Kernel density estimations to distinguish between vessels of the same
form but different size and to establish morphometric categories (Figures 7 and 8). However, the exact
metric boundaries of these categories can vary within the range of a few centimetres across the sites
examined. This could be explained by different potting traditions at these sites, but other factors, such
as technological knowledge, experience, and skills of the potters, as well as community or individual
preferences, might also have influenced the size of the vessels (Apel, 2008; Crown, 2001; Gandon et al.,
2011; Kamp, 2001; Stark, 1999, p. 40; Wayessa, 2011, p. 308). However, these differences were presumably
too minor to affect the general use of the vessels (Smith, 1988, pp. 914–915). The metric examination of the
neckless ceramics resulted in the identification of three vessel groups (Figure 2):(1)small, shallow neckless
Figure 4: Metric data recorded on each vessel.
8Eszter Solnay
pieces (almost entirely represented by form A1)was the most dominant vessel category: rim diameter
<18 cm or ≤8 cm; bowl height <14 cm, depending on the site, (2)wide, shallow neckless vessels occurring
with or without pedestal (classified mainly as form A2, but some pieces resembling form A1 also belong
here): rim diameter ≥18 cm; bowl height <14 cm, and (3)large, 1/1 ratio neckless vessels (represented by
form B1 and form A1): bowl height <14 cm or <8 cm, depending on the site, but their rim diameter and
height increase equally to almost 1:1. Metric examinations focusing on vessels with neck parts were able to
distinguish two groups (Figure 2):(1)regular-sized ceramics with necks (the vast majority of which
Figure 5: Scatter plot of neckless vessels at: (a)Tiszapolgár-Basatanya; (b)Tiszavalk-Kenderföld; and (c)Polgár-Nagy-Kasziba
and Tiszabábolna-Szilpuszta (the legends contain the traditional typological terms to visualise their metrical distribution).
Everything Has a Role To Play 9
belonged to form C1): widest point of body ≤20 cm and (2)large-sized vessels with necks (represented by
form C1): widest point of body >20 cm. Due to the small amount of the deep, neckless pedestalled vessels
(B2)and the pedestalled vessels with necks (C2), these morphological categories fell below significant
representation during the metric analysis. Finally, after the establishment of the morphometric categories,
the morphological composition of the burials was re-examined and morphometric-based vessel assem-
blages in each burial were defined.
Figure 6: Scatter plot of vessels with neck at: (a)Tiszapolgár-Basatanya; (b)Tiszavalk-Kenderföld; and (c)Polgár-Nagy-Kasziba
and Tiszabábolna-Szilpuszta (the legends contain the traditional typological terms to visualise their metrical distribution).
10 Eszter Solnay
Figure 7: Kernel density plot of neckless vessels at: (a)Tiszapolgár-Basatanya; (b)Tiszavalk-Kenderföld; and (c)Polgár-Nagy-
Kasziba and Tiszabábolna-Szilpuszta.
Everything Has a Role To Play 11
5 Results
5.1 Tiszapolgár-Basatanya
Ninety burials (Σ=417 vessels)and their ceramic assemblages were suitable for examination, which
included 48 Tiszapolgár, 38 Bodrogkeresztúr, and 8 transitional graves. Morphological analyses concluded
that the shallow neckless vessels (A1)and vessels with necks (C1)occurred most frequently, but the amount
of the shallow neckless ceramics with pedestals (A2)and deep neckless vessels (B1)was also significant
(Table 1).
The first correspondence analysis showed the transitional graves to be independent of both the
Tiszapolgár and the Bodrogkeresztúr burials (Figure 9a), which could be explained by the lack of so-called
‘culture-specific’ceramic types (i.e. the shallow neckless vessels [A1], vessels with necks [C1], and shallow
neckless open ceramics with pedestals [A2]), and the large number of undiagnostic, deep neckless ceramics
(B1). However, the second correspondence analysis with the omission of transitional graves suggested a
different vessel distribution, by which two groups could be identified (Figure 9b and 9c):(1)burials where
the presence of the shallow neckless vessels (A1)and vessels with necks (C1)was dominant and (2)burials
where these ceramic forms could be present but were not dominant in the ceramic assemblage as a whole.
Figure 8: Kernel density plot of vessels with neck at: (a)Tiszapolgár-Basatanya and (b)Tiszavalk-Kenderföld.
12 Eszter Solnay
Table 1: The number and percentage of graves containing various vessel forms at Tiszapolgár-Basatanya
Shallow neckless vessels
without pedestal (A1)
Shallow neckless
vessels with
pedestal (A2)
Deep neckless vessels
without pedestal (B1)
Deep neckless vessels
with pedestal (B2)
Vessels with necks
without pedestal (C1)
Vessels with necks
with pedestal (C2)
Tiszapolgár style burials
(Σ=45)
40 (89%)39 (87%)20 (44%)1(2%)37 (82%)7(16%)
Bodrogkeresztúr style burials
(Σ=37)
32 (86%)6(16%)14 (38%)030(81%)6(16%)
Transitional burials (Σ=8)1(13%)07
(88%)002(25%)
Total (Σ=90)73 (81%)45 (50%)41 (46%)1(1%)67 (74%)15 (17%)
The table includes binary data indicating only the presence or absence of these forms in the graves, not the exact quantity of each ceramic form.
Everything Has a Role To Play 13
Figure 9: (a)Correspondence analysis of the graves from Tiszapolgár-Basatanya with 1σellipse and the separation of the
transitional graves. (b)Correspondence analysis of the graves from Tiszapolgár-Basatanya with the omission of transitional
graves. (c)Kernel density plot generated from the second correspondence analysis from Tiszapolgár-Basatanya.
14 Eszter Solnay
The first scenario was typical of the graves of both ceramic styles, while the second was mainly character-
istic of the Tiszapolgár burials.
Based on the metric analysis of the simplified morphological ceramic categories, the following
morphometric vessel assemblages could be observed: the most commonly occurring vessel combination
included small, shallow neckless vessels and regular-sized vessels with necks found in 67% of the burials
at Tiszapolgár-Basatanya (Tables 2 and 3).¹ The difference between the Tiszapolgár and the Bodrogkeresztúr
burial assemblages is also reflected by the third ceramic category included in the graves (Table 4). In the
Tiszapolgár burials, the wide, shallow neckless vessels represented the most frequently occurring ceramic
category, while in the Bodrogkeresztúr burials, this particular ceramic category was rare. The presence of
the large, 1/1 ratio neckless vessels is notable too, occurring in an approximately equal number of graves of
both ceramic styles. The number of large-size vessels with necks was limited and found mainly in the
Tiszapolgár graves.
5.2 Tiszavalk-Kenderföld
Thirty Bodrogkeresztúr style burials (Σ=90 vessels)were included in the examinations. The morphological
analysis showed that shallow neckless vessels (A1)and vessels with necks (C1)were by far the most
dominant forms, but deep neckless ceramics (B1)were significant too (Table 5).
Table 2: The number of graves containing minimum one small, shallow neckless vessel and minimum one regular-sized vessel
with neck at Tiszapolgár-Basatanya
Vessel combination of minimum one small, shallow neckless vessel and
minimum one regular-sized vessel with neck
Tiszapolgár style burials (Σ=45)35 (78%)
Bodrogkeresztúr style burials (Σ=37)25 (68%)
Transitional burials (Σ=8)0
Total (Σ=90)60 (67%)
Table 3: The vessel combinations in graves which did not contain minimum one small, shallow neckless vessel and minimum
one regular-sized vessel with neck at Tiszapolgár-Basatanya
Vessel combination of minimum
one small, shallow neckless
vessel and minimum one large,
deep vessel
Vessel combination of minimum
one large, 1/1 ratio neckless vessel
and minimum one wide, shallow
neckless vessel
Just one ceramic
morphometric type
Tiszapolgár style burials
(Σ=12)
3(25%)3(25%)4(33%)
Bodrogkeresztúr style
burials (Σ=10)
5(50%)06(60%)
Transitional burials
(Σ=8)
00 6(75%)
Total (Σ=30)8(27%)3(10%)16 (53%)
Vessel combinations not mentioned here were of negligible quantity.
1Generally, one or two shallow neckless ceramics (A1)and a single vessel with a neck (C1).
Everything Has a Role To Play 15
The correspondence analysis identified two groups (Figure 10a and 10b):(1)burials accompanied only
by shallow neckless vessels (A1)and vessels with necks (C1)(53%)and (2)burials with deep neckless
ceramics (B1)as well as shallow neckless vessels (A1)and vessels with necks (C1)(30%).
Morphometric analyses of the burial assemblages have shown that the most frequently occurring vessel
combinations were of small, shallow neckless ceramics and regular-sized vessels with neck found in 90% of
the graves. The presence of the large, deep vessels was also significant; however, the wide, shallow neckless
vessels were completely absent, contrary to the situation documented at Tiszapolgár-Basatanya.
5.3 Polgár-Nagy-Kasziba and Tiszabábolna-Szilpuszta
Altogether seven Tiszapolgár style burials (Σ=45 vessels)from the sites of Polgár-Nagy-Kasziba (Σ=27
vessels)and Tiszabábolna-Szilpuszta (Σ=18 vessels)could be included in the analysis (Table 6). These two
sites are discussed together due to the small number of graves deemed suitable for analysis, to provide a
better understanding of the occurring vessel categories. The morphological analysis indicated that the most
numerous ceramic forms were the shallow neckless vessel (A1), but vessels with necks (C1)and shallow
neckless ceramics with pedestals (A2)also occurred frequently, while the number of the deep neckless
vessels (B1)was significant too. Due to the small number of burials, multivariate statistics could not be
carried out at these sites.
The two main ceramic combinations based on morphometrics were (1)small, shallow neckless vessels
and regular-sized vessels with necks and (2)small, shallow neckless vessels and wide, shallow neckless
vessels.
5.4 Szabolcs, Tiszavalk-Tetes, Szihalom-Sóhajtó, and Szihalom-Pamlényi-tábla
The morphometric analysis of mortuary ceramics from the first four sites (Tiszapolgár-Basatanya,
Tiszavalk-Kenderföld, Polgár-Nagy-Kasziba, and Tiszabábolna-Szilpuszta)has shown high levels of
homogeneity among the Tiszapolgár and Bodrogkeresztúr style graves, the key difference being the
representation of wide, shallow neckless vessels. This could be due to either the variations between
the two ceramic styles or the different individual characters of the sites under study. To investigate
this issue further, altogether 21 graves (Σ=104 vessels)were examined from four other, not fully pub-
lished Tiszapolgár and Bodrogkeresztúr sites (in terms of the ceramic metric data)and achieved the
identification of the morphometric categories established by the analyses based on the four major, fully
published sites (Table 7).
The results have shown the clear dominance of the small, shallow neckless vessels and regular-sized
ceramics with necks in the assemblages, independent from the style (Table 8). However, wide, shallow
neckless vessels were represented mainly among the Tiszapolgár style graves and were generally absent
from the Bodrogkeresztúr style burials. At Tiszavalk-Tetes, almost 70% of the analysed burials contained
Table 4: The third ceramic morphometric type in graves containing the vessel combination of minimum one small, shallow
neckless vessel and minimum one regular-sized vessel with neck at Tiszapolgár-Basatanya
Wide, shallow neckless vessels
with or without pedestal
Large, 1/1 ratio
neckless vessels
Large-sized
vessels with necks
Tiszapolgár style burials (Σ=35)31 (89%)13 (3%)14 (40%)
Bodrogkeresztúr style burials (Σ=25)5(20%)8(32%)2(8%)
Transitional burials (Σ=0)000
Total (Σ=60)36 (60%)21 (35%)16 (27%)
16 Eszter Solnay
Table 5: The number and percentage of graves containing various vessel forms at Tiszavalk-Kenderföld
Shallow neckless vessels
without pedestal (A1)
Shallow neckless vessels
with pedestal (A2)
Deep neckless vessels
without pedestal (B1)
Deep neckless vessels
with pedestal (B2)
Vessels with necks
without pedestal (C1)
Vessels with necks with
pedestal (C2)
Total
(Σ=30)
29 (97%)2(7%)10 (33%)028(93%)2(7%)
The table includes binary data indicating only the presence or absence of these forms in the graves, not the exact quantity of each ceramic form.
Everything Has a Role To Play 17
wide, shallow neckless vessels, despite that the cemetery was previously classified as Bodrogkeresztúr
style. This implies that the presence of this particular morphometric type in graves cannot be seen auto-
matically as ‘culture-specific’, even if they were dominant at sites associated clearly with a certain ceramic
style.
6 Discussion
Instead of a typological assessment, the definition of basic morphological categories and the establish-
ment of morphometric groups made it possible for the ceramic assemblages of the Tiszapolgár and
Bodrogkeresztúr burials can be compared, and the utilitarian function of the vessels to be outlined
(Figure 11). The morphometric analyses demonstrated very similar funerary ceramic assemblages present
in the graves of both the Tiszapolgár and the Bodrogkeresztúr styles in the Upper Tisza Region. Generally,
the ceramic assemblages in the burials of both ceramic styles contain a regular-sized vessel type with
Figure 10: (a)Correspondence analysis of the graves from Tiszavalk-Kenderföld. (b)Kernel density plot generated from the
correspondence analysis from Tiszavalk-Kenderföld.
18 Eszter Solnay
Table 6: The number and percentage of graves containing a variety of vessel forms at Polgár-Nagy-Kasziba and Tiszabábolna-Szilpuszta
Shallow neckless vessels
without pedestal (A1)
Shallow neckless vessels
with pedestal (A2)
Deep neckless vessels
without pedestal (B1)
Deep neckless, vessels
with pedestal (B2)
Vessels with necks
without pedestal (C1)
Vessels with necks with
pedestal (C2)
Total (Σ=7)6(97%)5(71%)4(33%)2(29%)5(71%)0
The table includes binary data indicating only the presence or absence of these forms in the graves, not the exact quantity of each ceramic form.
Everything Has a Role To Play 19
Table 7: The number and percentage of graves containing various vessel forms at Szabolcs, Tiszavalk-Tetes, Szihalom-Sóhajtó and Szihalom-Pamlényi-tábla
Shallow neckless vessels
without pedestal (A1)
Shallow neckless vessels
with pedestal (A2)
Deep neckless vessels
without pedestal (B1)
Deep neckless vessels
with pedestal (B2)
Vessels with necks
without pedestal (C1)
Vessels with necks
with pedestal (C2)
Total at Szabolcs (Σ=3)3(100%)1(33%)2(67%)02(67%)1(33%)
Total at Tiszavalk-Tetes
(Σ=16)
16 (100%)9(56%)9(56%)2(13%)15 (94%)4(25%)
Total at Szihalom-
Sóhajtó (Σ=1)
1(100%)0001(100%)0
Total at Szihalom-
Pamlényi-tábla (Σ=1)
1(100%)0001(100%)0
The table includes binary data indicating only the presence or absence of these forms in the graves, not the exact quantity of each ceramic form.
20 Eszter Solnay
neck and at least one small, shallow neckless vessel type, which can be identified as a ‘basic set’–as it is
going to be referred to henceforth. In the ‘basic set’, small, shallow neckless vessels correspond with the
cups and small bowls described by the typology of Bognár-Kutzián (1963, pp. 259–264, 288–292),while
regular-sized vessel types with necks equate mainly to jars, jugs, and milk jugs (Bognár-Kutzián, 1963,
pp. 244–247, 276).
One of the key pieces of the ‘basic set’is the regular-sized vessel with neck. As ethnoarchaeological
examples have shown, the presence of the neck indicates either a long-term storage function or the storage
of liquids of some kind (Kramberger, 2015, p. 233; Rice, 1987, p. 241; Skibo, 2013, pp. 30–31; Smith, 1988,
p. 914). However, given the relatively small size of these vessels under study here –compared to an average-
sized storage vessel –makes the long-term storage of everyday goods, such as cereal grains, fruits or
vegetables, highly unlikely (Henrickson & McDonald, 1983, p. 634; Smith, 1988, p. 914). These vessels
seem more suitable for the transportation of liquids (Pechtl, 2015, p. 565, Figure 29.4), serving, or short-
term storage functions (Blitz, 1993, p. 84), but could have been used for the long-term storage of small
amounts of valuable goods, for example, special herbs, or fruits. Lipid analyses carried out on milk jugs
showed evidence of animal fat residues in a significant number of vessels, as opposed to signatures related
to dairy fats, which only one of the vessels contained (Craig et al., 2003, p. 258; Hoekman-Sites, 2011, pp.
176–178). However, only one examined sample came from a site included in the present article from
Tiszavalk-Tetes (Craig et al., 2003, p. 254).
Another key element of the ‘basic set’is the class of small, shallow neckless vessels, which could have
been intended for personal use at mealtimes (Pechtl, 2015, p. 565, Figure 29.4), as demonstrated by ethno-
graphic examples (Henrickson & McDonald, 1983, p. 632; Trias, Rosselló, Molina, & Santacreu, 2015, p. 91).
Depending on the depth, these small shallow potteries could have equally been suitable for the consump-
tion of liquid or solid foods (Hally, 1986, p. 270). However, in burials, these vessels were generally placed
near regular-sized vessels with necks –particularly in Bodrogkeresztúr style graves (Bognár-Kutzián, 1963,
p. 290; Patay, 1978b, pp. 36, 49)²–which could have been connected to smaller amount of liquid or solid
food. Thus, this close position of the small, shallow neckless vessels suggests a function for the consump-
tion of liquids or solid food, while in some burials, they could have also served as lids (Bognár-Kutzián,
1963, pp. 290, 298).
The ‘basic sets’are likely to have been associated with, or belonged to single individuals. Elements of
the ‘basic set’, particularly the regular-sized vessels with necks, were placed in front of the face of the
deceased or around the skull in the Bodrogkeresztúr style burials (Patay, 1978b,p.37). Such vessels were
deposited in a similar position in the Tiszapolgár graves too, although in some cases they also occur beside
the legs. This characteristic vessel placement appears to have roots in the Late Neolithic Tisza-Herpály-
Csőszhalom complex, where –in the rare cases when ceramics were found in graves –the vessels were
largely installed near the skull or around the legs (Sebők, 2012, p. 108, Tables 3 and 4). However, the Early
Copper Age ‘basic set’–containing one small, shallow neckless vessel type and a regular-sized vessel type
Table 8: The number of graves containing minimum one small, shallow neckless vessel and minimum one regular-sized vessel
with neck at Szabolcs, Tiszavalk-Tetes, Szihalom-Sóhajtó, and Szihalom-Pamlényi-tábla
Vessel combination of minimum one small, shallow neckless vessel and minimum
one regular-sized vessel with neck
Szabolcs (Σ=3)2(67%)
Tiszavalk-Tetes (Σ=16)14 (88%)
Szihalom-Sóhajtó (Σ=1)1(100%)
Szihalom-Pamlényi-tábla (Σ=1)1(100%)
2These could be represented mainly by the jugs and milk jugs in the typology of Bognár-Kutzián (1963, p. 276).
Everything Has a Role To Play 21
with neck –could not yet been identified in the Late Neolithic period. Therefore, following on from these
early deposition practices of ceramic grave goods, it could be suggested that a highly individualised ‘basic
set’was established only by the period of the Early Copper Age.
Besides the ‘basic set’, the other regularly occurring ceramic types are the wide, shallow neckless
vessels with or without pedestals, which generally, but not exclusively, are found in Tiszapolgár style
graves. These could be equated to the hollow-pedestalled bowls or goblets and the wide bowls described
in the typology by Bognár-Kutzián (1963, pp. 248–258, 285–286). Depending on their depths (not including
their pedestal, if they had one), they could have been used for serving liquids, or more likely solid foods
(Henrickson & McDonald, 1983, p. 632; Kramberger, 2015, p. 241; Smith, 1988, p. 914). Their potential
utilisation as tablewares may have been emphasised even further by the tall hollow-pedestals in some
instances, as pedestals may have made access to food easier (Kramberger, 2015, pp. 241–242, 245). Based on
ethnographic examples, the wide, shallow neckless vessel types could have generally been used for com-
munal meals by a family or household (Hally, 1986, p. 289; Mills, 1999, pp. 102–103, 2007). The wide,
shallow neckless vessel types with or without pedestals could have been used during communal feasts;
however, their size is only suitable for serving about a dozen people at one time. It is more likely that they
were used by nuclear families or smaller households. Some of these vessels might have already been
emptied by the time they were placed into the grave (Csányi, Raczky, & Tárnoki, 2009, p. 17), which implies
a funerary meal or small feasting event prior to the burial.
Figure 11: The different ceramic morphometric categories and their possible function in Early Copper Age graves.
22 Eszter Solnay
Another frequently occurring morphometric category is the large, 1/1 ratio neckless vessels. These could
be represented mainly by the flowerpot-like vessels in the typology of Bognár-Kutzián (1985, pp. 240–242,
271–274). Due to their aperture being quite wide, and their overall size much smaller than an average
storage vessel, their function as long-term storage containers seems unlikely (Henrickson & McDonald,
1983, pp. 632–633; Skibo, 2013, p. 33). However, large, deep vessels could have been suitable for cooking
(Bognár-Kutzián, 1985, pp. 242, 274, 250), as their thick, coarse walls (Bognár-Kutzián, 1963, p. 355; Solnay,
2018, p. 185)and traces of secondary burning detected on their exterior indicate. Furthermore, small, shallow
neckless vessels (which do not form part of the ‘basic set’)were often found inside these large, 1/1 ratio
neckless vessels (Bognár-Kutzián, 1963, p. 264), perhaps functioning as scoops or ladles. This suggests that
these large, 1/1 ratio neckless vessels could have contained liquids or small pieces of solid foods.
The group of the large, 1/1 ratio neckless vessels was the only morphometric group where a regularly
occurring association was observed between the placement of the vessels and the age of the deceased
individual. Large, 1/1 ratio neckless containers were found placed next to the body in inhumation burials
laid on their left side –i.e. mainly women (Bognár-Kutzián, 1963, p. 355; Chapman, 2000, p. 82; Kadrow,
2010, p. 58; Lichter, 2001, pp. 277–278; Meisenheimer, 1989, p. 3; Raczky et al., 2014, p. 329; Sofaer
Derevenski, 1997, p. 877)–almost in every case in the examined cemeteries (Bognár-Kutzián, 1963, p.
242)and grave clusters. Furthermore, more than a half of these vessels were placed in the graves of females
over 40 years of age at Tiszapolgár-Basatanya and at Polgár-Nagy-Kasziba (osteological examinations had
not been carried out on burials from other cemeteries and grave clusters). The relationship between cooking
pots and the female gender can be observed in wide ranging ethnographic contexts since these vessels are
strongly linked to the labour and domestic roles of women (Anderson, 2019, p. 142; Haaland, 1997, p. 378;
Hastorf, 2016, p. 183). It is possible that there could be a certain symbolic association between the large, 1/1
ratio neckless vessels and mature women in the Early Copper Age burials.
The last morphometric ceramic category was the large-sized vessels with necks, which are only known
from Tiszapolgár-Basatanya. These could be represented mainly by the cooking pots and storage jars in the
typology of Ida Bognár-Kutzián (Bognár-Kutzián, 1963, pp. 242–244, 247–248, 274–275). Due to the presence
of the neck, the long-term storage function or storage of liquids of some kind can be assumed (Kramberger,
2015, p. 233; Rice, 1987, p. 241; Skibo, 2013, pp. 30–31; Smith, 1988, p. 914). However, based on ethnographic
examples, their size is slightly smaller than the average long-term storage vessels of liquid or solid foods
(Henrickson & McDonald, 1983, pp. 632–633): the diameter of the rim is 10.7–21 cm, the maximum width of
the body is 20–27 cm, and the absolute height of the entire vessel was 21–37 cm. Thus, these were probably
used for long-term storage of medium quantities. In comparison, on the Late Neolithic Great Hungarian
Plain, the diameter of the rim of storage jars was defined around 21–36 cm, the maximum width of the body
was around 21–36 cm, and the absolute height of the entire vessel was around 26–46 cm (Füzesi & Raczky,
2018, pp. 142–146). Moreover, on the Middle Bronze Age Great Hungarian Plain, the absolute height of
storage jars was between 60 and 80 cm (Szathmári, 2009, p. 298).
7 Conclusions
Since the previous Early Copper Age studies of ceramic usage were always based on some generalisations –
like the previously discussed issue of milk jugs –and complicated typologies, the identification of the
utilitarian function of mortuary pottery assemblages has never been carried out before. This study has
shown the effectiveness of the morphometric analysis on potteries not only for identifying the most optimal
use of ceramics but also for exploring the consistent pattern in the selection and deposition of mortuary
vessels. Moreover, this approach helps to clarify and compare the functional concept in Tiszapolgár and
Bodrogkeresztúr style burials, which could not be studied with the previously applied analytical methods.
The morphometric analysis of Early Copper Age graves in the Upper Tisza Region (Eastern Hungary)
revealed five main categories of ceramic function, each of which could be interpreted as fulfilling different
utilitarian functions. In the vast majority of the graves, the most dominant category is the highly
Everything Has a Role To Play 23
individualised ‘basic set’, which contained at least one small, shallow neckless vessel type and a regular-
sized vessel type with neck. Besides, the wide, shallow neckless vessels with or without pedestals (could
have served as tableware), as well as the large, 1/1 ratio neckless vessels (can be linked to mature women
and the roles they played), were often found in the burials. The large-sized vessels with neck –presumably
used for long-term storage –were the least common category.
In the case study area of the Upper Tisza Region, neither the Tiszapolgár nor the Bodrogkeresztúr style
funerary assemblages could unequivocally be distinguished from one another based on ceramic morpho-
metry.³ The ceramic assemblages of both the Tiszapolgár and the Bodrogkeresztúr styles contained iden-
tical morphometric categories with similar utilitarian functions associated with them. Although there could
be some level of difference observed in the preferences of certain vessel types in funerary assemblages
between the two ceramic styles (especially with regard to the wide, shallow neckless vessel forms), as the
site of Tiszavalk-Tetes clearly demonstrates, these differences are due to local variations rather than
differences between the Tiszapolgár and the Bodrogkeresztúr ceramic style overall.
This case study highlights the issue of the utilitarian function of ceramic grave-goods and provides a
possible interpretation of the vessel function through the morphometric analysis of the ceramic assem-
blages in the burials.
Acknowledgements: Hereby, I would like to express my gratitude to Zsuzsanna Siklósi for her numerous
comments and her continuous support. I wish to thank András Füzesi, Norbert Faragó, Márton Szilágyi, and
Péter Csippán for their help in preparing the statistics and their useful insights into the data. I am also
grateful to Borbála Nyíri for proofreading the English text. Finally, I thank the editors and reviewers for their
constructive comments.
Funding information: This article was supported by the ÚNKP-21-3 and ÚNKP-22-3 New National Excellence
Program of the Ministry for Innovation and Technology from the source of the National Research,
Development and Innovation Fund (grant numbers: ÚNKP-21-3-I-ELTE-153 and ÚNKP-22-3-I-ELTE-125).
Author contributions: The author has accepted responsibility for the entire content of this article.
Conflict of interest: Author states no conflict of interest.
Data availability statement: All data generated or analysed during this study are included in this published
article and its supplementary information files.
References
Abbink, A. A. (1999).Make it and break it: The cycles of pottery. A study of the technology, form, function and use of pottery from
the settlements at Uitgeest-Groot Dorregeest and Schagen-muggenburg 1, Roman period, North Holland, the Netherlands.
Leiden: Faculty of Archaeology, Leiden University. https://hdl.handle.net/1887/13510.
Anders, A., & Nagy, E. G. (2007). Late Neolithic burial rites at the site of Polgár-Csőszhalom-dűlő. In J. K. Kozłowski & P. Patay
(Eds.),The Lengyel, Polgár and related cultures in the Middle/Late Neolithic in Central Europe (pp. 83–96). Kraków: Polish
Academy of Arts and Sciences, Eötvös Loránd University Institute of Archaeological Sciences.
Anderson, S. L. (2019). Ethnographic and archaeological perspectives on the use life of northwest Alaskan Pottery. In K. Gibbs &
P. Jordan (Eds.),Ceramics in circumpolar prehistory: Technology, lifeways and cuisine (pp. 128–151). Cambridge:
Cambridge University Press. doi: 10.1017/9781316339374.007.
Apel, J. (2008). Knowledge, know-how and raw material. The production of late Neolithic Flint Daggers in Scandinavia. Journal
of Archaeological Method and Theory,15(1),91–111. doi: 10.1007/s10816-007-9044-2.
3István Zalai-Gaál made the same remark in his general analysis of the Early Copper Age pottery size (Zalai-Gaál, 2016,p.89).
24 Eszter Solnay
Banducci, L. (2014). Function and use of roman pottery: A quantitative method for assessing use-wear. Journal of Mediterranean
Archaeology,27(2), 187–210. doi: 10.1558/jmea.v27i2.187.
Banner, J., & Bognár-Kutzián, I. (1961). Beiträge zur Chronologie der Kupferzeit des Karpatenbeckens. Acta Archaeologica
Academiae Scientiarum Hungaricae,13,1–32.
Barnard, H., & Eerkens, J. W. (2017). Assessing vessel function by organic residue analysis. In A. Hunt (Ed.),The Oxford
handbook of archaeological ceramic analysis (pp. 625–650). Oxford: Oxford University Press. doi: 10.1093/oxfordhb/
9780199681532.013.37.
Blitz, J. H. (1993). Big pots for big shots: Feasting and storage in a mississippian community. American Antiquity,58(1),80–96.
doi: 10.2307/281455.
Bognár-Kutzián, I. (1963).The Copper Age cemetery of Tiszapolgár-Basatanya (Archaeologia Hungarica 42). Budapest:
Akadémia Kiadó.
Bognár-Kutzián, I. (1972).The early Copper Age Tiszapolgár culture in the Carpathian Basin (Archaeologia Hungarica 48).
Budapest: Akadémia Kiadó.
Bognár-Kutzián, I. (1985). Contribution to the prehistoric chronology of Hungary. Mitteilungen Des Archäologischen Instituts
Der Ungarischen Akademie Der Wissenschaften,14, 293–298.
Boudreaux, E. A. (2010). A Functional Analysis of Mississippian Ceramic Vessels from Town Creek. Southeastern Archaeology,
29(1),8–30. https://www.jstor.org/stable/41620045.
Braun, D. P. (1983). Pots as tools. In J. A. Moore & A. S. Keene (Eds.),Archaeological hammers and theories (pp. 107–134). New
York: Academic Press. doi: 10.1016/B978-0-12-505980-0.50012-4.
Chapman, J. (2000).Tensions at funerals: Micro-tradition analysis in later hungarian prehistory. Budapest: Archaeolingua.
Craig, O. E., Chapman, J., Figler, A., Patay, P., Taylor, G., & Collins, M. J. (2003).‘Milk Jugs’and other myths of the Copper Age of
Central Europe’.European Journal of Archaeology,6(3), 251–265. doi: 10.1179/eja.2003.6.3.251.
Crown, P. L. (2001). Learning to make pottery in the prehispanic american southwest. Journal of Anthropological Research,
57(4), 451–469. doi: 10.1086/jar.57.4.3631355.
Csányi, M., Raczky, P., & Tárnoki, J. (2009).Előzetes jelentés a rézkori bodrogkeresztúri kultúra Rákóczifalva-Bagi-földön feltárt
temetőjéről. Tisicum –A Jász-Nagykun-Szolnok Megyei Múzeumok Évkönyve,18,65–72.
Debels, P. (2018). Fonction des sites; fonction des céramiques?: Les apports d’une approche technofonctionnelle et d’une
étude des usures. In S. Léglise, F. Mathias, & J. Ripoche (Eds.),L’archéologie: Science plurielle. Paris: Éditions de la
Sorbonne. http://books.openedition.org/psorbonne/7060.
Ecsedy, I. (1977). Korai rézkori sírok Szabolcsból. Folia Archaeologica,28,11–38.
Fanti, L., Drieu, L., Mazuy, A., Blasco, T., Lugliè, C., & Regert, M. (2018). The role of pottery in Middle Neolithic societies of
western Mediterranean (Sardinia, Italy, 4500–4000 cal BC)revealed through an integrated morphometric, use-wear,
biomolecular and isotopic approach. Journal of Archaeological Science,93, 110–128. doi: 10.1016/j.jas.2018.03.005.
Fowler, K. D. (2006). Classification and collapse: The ethnohistory of Zulu ceramic use. Southern African Humanities,18(2),
93–117. doi: 10.10520/EJC84779.
Füzesi, A., & Raczky, P. (2018). Öcsöd-Kováshalom. Potscape of a Late Neolithic site in the Tisza region. Dissertationes
Archaeologicae,3(6),43–146. doi: 10.17204/dissarch.2018.43.
Gandon, E., Casanova, R., Sainton, P., Coyle, T., Roux, V., Bril, B., & Bootsma, R. J. (2011). A proxy of potters’throwing skill:
Ceramic vessels considered in terms of mechanical stress. Journal of Archaeological Science,38(5), 1080–1089.
doi: 10.1016/j.jas.2010.12.003.
Gosselain, O. P. (1992). Technology and style: Potters and pottery among Bafia of Cameroon. Man –New Series,27(3), 559–586.
Gyucha, A. (2015).Prehistoric village social dynamics: The early Copper Age in the Koros region. Budapest: Archaeolingua.
Haaland, R. (1997). Emergence of sedentism: New ways of living, new ways of symbolizing. Antiquity,71(272), 374–385.
doi: 10.1017/S0003598X00084982.
Hajdú, Z., & Nagy, E. G. (1999). Rövid jelentés az M3 autó-pálya Hajdú-Bihar megyei szakaszán azonosított régészeti
lelőhelyeken végzett munkáról 1993–1998 között. A Debreceni Déri Múzeum Évkönyve,1997–1998, 143–154.
Hally, D. J. (1986). The identification of vessel function: A case study from northwest Georgia. American Antiquity,51(2),
267–295. doi: 10.2307/279940.
Hammer, Ø., Harper, D. A. T., & Ryan, P. D. (2001). PAST: Paleontological statistics software package for education and data
analysis. Palaeontologia Electronica,4(1),1–9. https://paleo.carleton.ca/2001_1/past/past.pdf.
Hastorf, C. A. (2016).The social archaeology of food: Thinking about eating from prehistory to the present. Cambridge:
Cambridge University Press. doi: 10.1017/9781316597590.
Henrickson, E. F., & McDonald, M. M. A. (1983). Ceramic form and function: An ethnographic search and an archeological
application. American Anthropologist,85(3), 630–643. doi: 10.1525/aa.1983.85.3.02a00070.
Heron, C., & Evershed, R. P. (1993). The analysis of organic residues and the study of pottery use. Archaeological Method and
Theory,5, 247–284. https://www.jstor.org/stable/20170233.
Hillebrand, J. (1927). A bodrogkeresztúri rézkori kultúra köre. Archaeologiai Értesítő,41,50–57.
Hillebrandt, M., & Patay, P. (1977). Újabb rézkori temetők Dél-Borsodban. A Herman Ottó Múzeum Évkönyve,16,43–76.
Everything Has a Role To Play 25
Hoekman-Sites, H. A. (2011). Resource Intensification in Early Village Societies: Dairying on the Great Hungarian Plain. (PhD
thesis, Unpublished doctoral dissertation). Florida State University, Florida. https://diginole.lib.fsu.edu/islandora/
object/fsu%3A254277/.
Kadrow, S. (2010). Gender-differentiated burial rites in Europe of the 5th and 4th millennia BC: Attempts at traditional
archaeological interpretation. Analecta Archaeologica Ressoviensia,3,49–95.
Kalicz, N. (1958). Rézkori sztratigráfia Székely község határában. Copper Age stratigraphy in the outskirts of the village
Székely. Archaeologiai Értesítő,85,3–6.
Kamp, K. A. (2001). Prehistoric children working and playing: A southwestern case study in learning ceramics. Journal of
Anthropological Research,57, 427–450. doi: 10.1086/jar.57.4.3631354.
Kempton, W. (Ed.).(1981).The folk classification of ceramics. A study of cognitive prototypes. New York: Academic Press.
doi: 10.1016/B978-0-12-404080-9.X5001-7.
Kramberger, B. (2015). Forms, function, and use of Early Eneolithic pottery and settlement structures from Zgornje Radvanje,
Slovenia. Documenta Praehistorica,42, 231–250. doi: 10.4312/dp.42.16.
Lichter, C. (2001).Untersuchungen zu den Bestattungssitten des südosteuropäischen Neolithikums und Chalkolithikums. Mainz
am Rhein: Zabern.
Longacre, W. A., Xia, J., & Yang, T. (2000). I want to buy a black pot. Journal of Archaeological Method and Theory,7(4),
273–293.
Martinez-Carrillo, A., & Barcelo, J. (2017). Formal typology of iberian ceramic vessels by morphometric analysis. In A. Hunt (Ed.),
The Oxford handbook of archaeological ceramic analysis (pp. 585–602). Oxford: Oxford University Press. doi: 10.1093/
oxfordhb/9780199681532.013.35.
Marton, T., & Patay, R. (2004). Középsőrézkori temetkezések Szihalomról (Előzetes jelentés). In G. Ilon & G. Vékony (Eds.),
Momósz III. Őskoros Kutatók III. Összejövetelének konferenciakötete; Halottkultusz és temetkezés; Szombathely—Bozsok,
2002. Október 7-9(pp. 293–304). Szombathely: Vas Megyei Múzeumok Igazgatósága.
Meisenheimer, M. (1989).Das Totenritual, gepragt durch Jenseitsvorstellungen und Gesellschaftsrealitat: Theorie des
Totenrituals eines kupferzeitlichen Friedhofs zu Tiszapolgar-Basatanya, Ungarn (BAR International Series 475). Oxford: BAR
Publishing.
Mills, B. J. (1999). Ceramics and the social contexts of food consumption in the northern Southwest. In J. M. Skibo &
G. M. Feinman (Eds.),Pottery and people: A dynamic interaction (pp. 99–114). Salt Lake City: University of Utah Press.
Mills, B. J. (2007). Performing the Feast: Visual Display and Suprahousehold Commensalism in the Puebloan Southwest.
American Antiquity,72(2), 210–239. doi: 10.2307/40035812.
Orton, C., Tyers, P., & Vince, A. (1993).Pottery in archaeology. Cambridge, New York: Cambridge University Press.
Parkinson, W. A. (2006a). The social organization of early Copper Age tribes on the Great Hungarian Plain (BAR International
Series 1573). Oxford: BAR Publishing. doi: 10.30861/9781841717883.
Parkinson, W. A. (2006b). Tribal boundaries: Stylistic variability and social boundary maintenance during the transition to the
Copper Age on the Great Hungarian Plain. Journal of Anthropological Archaeology,25(1),33–58. doi: 10.1016/j.jaa.2005.
06.002.
Parkinson, W. A., & Gyucha, A. (2007). A későneolitikum-kora rézkor átmeneti időszakának társadalomszerkezeti változásai az
Alföldön: Rekonstrukciós kísérlet. Archaeologiai Értesítő,132(1),37–81. doi: 10.1556/archert.132.2007.1.2.
Parkinson, W. A., Gyucha, A., & Yerkes, R. W. (2021).Bikeri: Two Copper Age Villages on the Great Hungarian Plain (Monumenta
Archaeologica 46). Los Angeles: Cotsen Institute of Archaeology at UCLA.
Patay, P. (1961).A bodrogkeresztúri kultúra temetői(Régészeti Füzetek II/10). Budapest: Magyar Nemzeti Múzeum -Történeti
Múzeum.
Patay, P. (1974). Die hochkupferzeitliche Bodrogkeresztúr-Kultur. Bericht der Römisch-Germanischen Kommission,55,1–75.
Patay, P. (1978a). A Tiszavalk-tetesi rézkori temetőés telep. Folia Archaeologica,29,21–58.
Patay, P. (1978b).Das kupferzeitliche Gräberfeld von Tiszavalk-Kenderföld (Inventaria Praehistorica Hungariae 11). Budapest:
Akadémiai Kiadó.
Patay, P. (1979). A Tiszavalk-tetesi rézkori temetőés telep. II. A telep. Folia Archaeologica,30,28–53.
Pechtl, J. (2015). Linearbandkeramik pottery and society. In C. Fowler, J. Harding, & D. Hofmann (Eds.),The Oxford handbook of
Neolithic Europe (pp. 555–572). Oxford: Oxford University Press. doi: 10.1093/oxfordhb/9780199545841.013.013.
Raczky, P. (1995). New data on the absolute chronology of the Copper Age in the Carpathian Basin. In T. Kovács (Ed.),Neuere
Daten zur Siedlungsgeschichte und Chronologie der Kupferzeit des Karpatenbeckens (pp. 51–60). Budapest: Magyar
Nemzeti Múzeum.
Raczky, P., Anders, A., Nagy, E. G., Kriveczky, B., Hajdú, Z., & Szalai, T. (1997). Polgár-Nagy Kasziba. Rézkori sírok a Kr.
E. V. évezredből. –Polgár-Nagy Kasziba. Copper Age burials from the last 5th Millennium B.C. In P. Raczky, T. Kovács, &
A. Anders (Eds.),Utak a múltba –Az M3-as autópálya régészeti leletmentései/Paths into the Past. Rescue excavations on
the M3 motorway (pp. 47–50). Budapest: Magyar Nemzeti Múzeum and ELTE Régészettudományi Intézet.
Raczky, P., Anders, A., & Siklósi, Z. (2014). Trajectories of continuity and change between the Late Neolithic and the Copper Age
in Eastern Hungary. In W. Schier & F. Drașovean (Eds.),The Neolithic and Eneolithic in Southeast Europe: New approaches
to dating and cultural dynamics in the 6th to 4th millenium BC (pp. 319–346). Rahden/Westf: VML, Verlag Marie
Leidorf GmbH.
26 Eszter Solnay
Raczky, P., & Siklósi, Z. (2013). Reconsideration of the Copper Age chronology of the eastern Carpathian Basin: A Bayesian
approach. Antiquity,87(336), 555–573. doi: 10.1017/S0003598X00049127.
Read, D. W. (2007).Artifact classification: A conceptual and methodological approach. Walnut Creek, California: Left Coast
Press.
Rice, P. M. (1987).Pottery analysis: A sourcebook. Chicago, London: University of Chicago Press.
Santacreu, D. A., Trias, M. C., & Rosselló, J. G. (2017). Formal Analysis and Typological Classification in the Study of Ancient
Pottery. In A. Hunt (Ed.),The Oxford handbook of archaeological ceramic analysis (pp. 181–199). Oxford: Oxford University
Press. doi: 10.1093/oxfordhb/9780199681532.013.12.
Sebők, K. (2012). Lengyeli eredetűhatások az Alföld kései neolitikumában. Pusztataskony-Ledence 1. Feltárásának első
eredményei. Archaeologiai Értesítő,137(1),97–123. doi: 10.1556/archert.137.2012.5.
Sherrat, A. (1982). Mobile resources: Settlement and exchange in early agricultural Europe. In C. Renfrew & S. Shennan (Eds.),
Ranking, resource and exchange: Aspect of the archaeology of early european society (pp. 27–32). Cambridge: Cambridge
University Press.
Sherrat, A. (1983a). Early agrarian settlement in the Körös region of the Great Hungarian Plain. Acta Archaeologica Academiae
Scientiarum Hungaricae,35, 155–169.
Sherrat, A. (1983b). The development of neolithic and copper age settlement in the Great Hungarian Plain. Part II: Site Survey
and settlement dynamics. Oxford Journal of Archaeology,2(1),13–41. doi: 10.1111/j.1468-0092.1983.tb00093.x.
Siklósi, Z., Faragó, N., Dani, J., Csedreki, L., Kertész, Z., Szikszai, Z., & Szilágyi, M. (2022). Creating histories: Different
perspectives, controversial narratives at Rákóczifalva, an Early Copper age site on the Great Hungarian Plain. European
Journal of Archaeology,25(3)350–371. doi: 10.1017/eaa.2022.2.
Siklósi, Z., & Szilágyi, M. (2016). Módszertani, interpretációs kérdések az alföldi rézkor radiokarbon keletkezése kapcsán.
Tisicum –A Jász-Nagykun-Szolnok Megyei Múzeumok Évkönyve,25,65–72.
Siklósi, Z., & Szilágyi, M. (2021)New data on the provenance of copper finds from the Early-Middle Copper Age of the Great
Hungarian Plain. Radiocarbon,63(2), 585–646. doi: 10.1017/RDC.2020.115.
Sinopoli, C. M. (1999). Levels of Complexity: Ceramic Variability at Vijayanagara. In J. M. Skibo & G. M. Feinman (Eds.),Pottery
and people. A dynamic interaction. Foundations of archaeological inquiry (pp. 115–136). Salt Lake City: University of Utah
Press.
Skibo, J. M. (1992).Pottery function: A use-alteration perspective. New York: Plenum.
Skibo, J. M. (2013).Understanding pottery function. New York: Springer. doi: 10.1007/978-1-4614-4199-1.
Skibo, J. M., & Schiffer, M. B. (2008).People and things: A behavioral approach to material culture. New York: Springer.
doi: 10.1007/978-0-387-76527-3.
Smith, M. F. Jr. (1986).The Study of ceramic function from artifact size and shape.(PhD thesis, Unpublished doctoral
dissertation). University Microfilms International, Ann Arbor.
Smith, M. F. Jr. (1988). Function from whole vessel shape: A method and an application to Anasazi Black Mesa, Arizona.
American Anthropologist,90(4), 912–923. doi: 10.1525/aa.1988.90.4.02a00090.
Sofaer Derevenski, J. (1997). Age and gender at the site of Tiszapolgár-Basatanya, Hungary. Antiquity,71(274), 875–889.
doi: 10.1017/S0003598X00085793.
Solnay, E. (2018). Early Copper Age Graves from Polgár-Nagy-Kasziba. Dissertationes Archaeologicae,3(6), 179–216.
doi: 10.17204/dissarch.2018.179.
Stark, M. T. (1999). Social dimensions of technical choice in Kalinga ceramic traditions. In E. S. Chilton (Ed.),Material
meanings: Critical approaches to the interpretation of material culture (pp. 24–43). Salt Lake City: University of Utah Press.
Szabó, J. J. (1997). Szihalom-Sóhajtó. Rézkori temetőa Kr. E. IV. évezredből. -Szihalom-Sójató. Copper Age cemetery from the
4th millenium BC. In P. Raczky, T. Kovács, & A. Anders (Eds.),Utak a múltba –Az M3-as autópálya régészeti leletmentései/
Paths into the Past. Rescue excavations on the M3 motorway (pp. 54–56). Budapest: Magyar Nemzeti Múzeum and ELTE
Régészettudományi Intézet.
Szathmári, I. (2009). Megjegyzések a bronzkori háztartások edénykészletéről. Tisicum –A Jász-Nagykun-Szolnok Megyei
Múzeumok Évkönyve,19, 295–308.
Szilágyi, M. (2015).Kora rézkori településszerkezet a Közép-Tisza-vidéken. (PhD thesis, Unpublished doctoral dissertation).
Eötvös Loránd University, Budapest. https://edit.elte.hu/xmlui/handle/10831/30002.
Szilágyi, M. (2016). Early Copper Age settlement patterns in the Middle Tisza Region. Dissertationes Archaeologicae,3(4),
395–402. doi: 10.17204/dissarch.2016.395.
Trias, M. C., Rosselló, J. G., Molina, D. J., & Santacreu, D. A. (2015). Playing with Mud? An ethnoarchaeological approach to
children’s learning in kusasi ceramic production. In M. Sánchez Romero, E. Alarcón García, & G. Aranda Jiménez (Eds.),
Children, spaces and identity (pp. 88–104). Oxford, Philadelphia: Oxbow Books.
Van der Veen, V. (2018). Form follows function. A new approach to determining vessel function. Internet Archaeology,50.
doi: 10.11141/ia.50.2.
Váradi, A. (1997). Szihalom-Pamlényi-tábla. Rézkori sír a Kr. E. IV. évezredből. -Szihalom-Pamlényi-tábla. Burial of the Copper
Age from the 4th millenium BC. In P. Raczky, T. Kovács, & A. Anders (Eds.),Utak a múltba –Az M3-as autópálya régészeti
leletmentései/Paths into the Past. Rescue excavations on the M3 motorway (pp. 51–53). Budapest: Magyar Nemzeti
Múzeum and ELTE Régészettudományi Intézet.
Everything Has a Role To Play 27
Vieugué, J. (2014). Use-wear analysis of prehistoric pottery: Methodological contributions from the study of the earliest ceramic
vessels in Bulgaria (6100–5500 BC).Journal of Archaeological Science,41, 622–630. doi: 10.1016/j.jas.2013.09.004.
Vieugué, J., Mirabaud, S., & Regert, M. (2008). Contribution méthodologique à l’analyse fonctionnelle des céramiques d’un
habitat néolithique: L’exemple de Kovačevo (6 200-5 500 av. J.-C., Bulgarie).ArcheoSciences. Revue d’archéométrie,32,
99–113. doi: 10.4000/archeosciences.1010.
Wayessa, B. S. (2011). The technical style of wallaga pottery making: An ethnoarchaeological study of oromo potters in
southwest highland Ethiopia. African Archaeological Review,28(4), 301–326. doi: 10.1007/s10437-011-9103-7.
Zalai-Gaál, I. (2016). Zeiträume und Formenkreise—Zur Chronologie der kupferzeitlichen Nekropolen im östlichen
Karpatenbecken. Acta Archaeologica Academiae Scientiarum Hungaricae,67(1),31–97. doi: 10.1556/072.2016.67.1.2.
28 Eszter Solnay
