A Habitable Fluvio-Lacustrine Environment at Yellowknife Bay, Gale Crater, Mars

Abstract

The Curiosity rover discovered fine-grained sedimentary rocks, inferred to represent an ancient lake, preserve evidence of an environment that would have been suited to support a Martian biosphere founded on chemolithoautotrophy. This aqueous environment was characterized by neutral pH, low salinity, and variable redox states of both iron and sulfur species. C, H, O, S, N, and P were measured directly as key biogenic elements, and by inference N and P are assumed to have been available. The environment likely had a minimum duration of hundreds to tens of thousands of years. These results highlight the biological viability of fluvial-lacustrine environments in the post-Noachian history of Mars.

Full text

Research Articles
/ http://www.sciencemag.org/content/early/recent / 9 December 2013 / Page 1 / 10.1126/science.1242777
The environmental history of early
Mars is mostly written in stone. The
first few billion years of Mars’ geologic
history records surface environments
considerably different than the surface
today, prompting a succession of coor-
dinated surface and orbiter missions
over the past two decades aimed ulti-
mately at determining if Mars ever had
an early biosphere. Water is the sine
qua non for all life as we understand it
and, therefore, past missions have
sought environments where water was
abundant and possibly long-lived.
However, to create an environment that
could have been habitable by microor-
ganisms the presence of water alone is
insufficient: a source of energy to fuel
microbial metabolism, as well as the
elements carbon, hydrogen, sulfur,
nitrogen, and phosphorous (and a host
of others at trace levels) also are re-
quired. The Mars Science Laboratory
(MSL) rover Curiosity was designed
and built to explore for these materials
and thus potentially delineate one or
more habitable environments at the
Gale crater landing site. We show here
that Gale crater once contained an an-
cient lake that would have been well
suited to support a Martian biosphere
founded on chemolithoautotrophy.
Exploration for habitable environ-
ments is Curiosity’s core mission ob-
jective. Achieving this goal necessitates
a challenging set of science measure-
ments on just the right rocks to extend
beyond the search for aqueous envi-
ronments. To enhance the probability of
mission success, we adopted an explo-
ration strategy that included well-
defined secondary objectives in addi-
tion to exploring Gale’s central moun-
tain, Aeolis Mons (informally known as
Mt. Sharp), the mission’s primary sci-
ence target. The selection of the Gale
crater field site, where Curiosity landed
on 6 August 2012, UTC, was based on
the recognition that it retained records
of multiple and diverse ancient aqueous
environments and thus enhanced the
potential that one or more of those set-
tings might have provided the combina-
tion of factors necessary to sustain a
habitable environment (1). Another
important factor included mapping the
landing ellipse ahead of landing so that
no matter where the rover touched
down, our first drive would take us in
the direction of a science target deemed
to have the greatest value as weighed
against longer term objectives, and the
A Habitable Fluvio-Lacustrine Environment
at Yellowknife Bay, Gale Crater, Mars
J. P. Grotzinger,
1
* D. Y. Sumner,
2
L. C. Kah,
3
K. Stack,
1
S. Gupta,
4
L. Edgar,
5
D. Rubin,
6
† K. Lewis,
7
J. Schieber,
8
N. Mangold,
9
R. Milliken,
10
P. G. Conrad,
11
D. DesMarais,
12
J. Farmer,
5
K. Siebach,
1
F.
Calef III,
13
J. Hurowitz,
14
S. M. McLennan,
14
D. Ming,
15
D. Vaniman,
16
J. Crisp,
13
A. Vasavada,
13
K. S.
Edgett,
17
M. Malin,
17
D. Blake,
12
R. Gellert,
18
P. Mahaffy,
11
R. C. Wiens,
19
S. Maurice,
20
J. A. Grant,
21
S. Wilson,
21
R. C. Anderson,
13
L. Beegle,
13
R. Arvidson,
22
B. Hallet,
23
R. S. Sletten,
23
M. Rice,
1
J. Bell
III,
5
J. Griffes,
1
B. Ehlmann,
1,13
R. B. Anderson,
24
T. F. Bristow,
12
W. E. Dietrich,
25
G. Dromart,
26
J.
Eigenbrode,
11
A. Fraeman,
22
C. Hardgrove,
17
K. Herkenhoff,
24
L. Jandura,
13
G. Kocurek,
27
S. Lee,
13
L. A. Leshin,
28
R. Leveille,
29
D. Limonadi,
13
J. Maki,
13
S. McCloskey,
13
M. Meyer,
30
M. Minitti,
5
H.
Newsom,
31
D. Oehler,
15
A. Okon,
13
M. Palucis,
25
T. Parker,
13
S. Rowland,
32
M. Schmidt,
33
S.
Squyres,
34
A. Steele,
35
E. Stolper,
1
R. Summons,
36
A. Treiman,
37
R. Williams,
16
A. Yingst,
16
MSL
Science Team‡
1
Division of Geologic and Planetary Sciences, California Institute of Technology, Pasadena, CA 91125,
USA.
2
Department of Earth and Planetary Sciences, University of California, Davis, CA 95616, USA.
3
Department of Earth and Planetary Sciences, University of Tennessee, Knoxville, TN 37996, USA.
4
Department of Earth Science and Engineering, Imperial College London, London, SW7 2AZ, UK.
5
School
of Earth and Space Exploration, Arizona State University, Tempe, AZ 85287, USA.
6
U.S. Geological
Survey, Santa Cruz, CA 95060, USA.
7
Department of Geoscience, Princeton University, Princeton, NJ
08544, USA.
8
Department of Geological Sciences, Indiana University, Bloomington, IN 47405, USA.
9
Laboratoire Planétologie et Géodynamique de Nantes, LPGN/CNRS UMR6112 and Université de Nantes,
44322 Nantes, France.
10
Department of Geological Sciences, Brown University, Providence, RI 02912,
USA.
11
NASA Goddard Space Flight Center, Greenbelt, MD 20771, USA.
12
Department of Space Sciences,
NASA Ames Research Center, Moffett Field, CA 94035, USA.
13
Jet Propulsion Laboratory, California
Institute of Technology, Pasadena, CA 91109, USA.
14
Department of Geosciences, State University of New
York State at Stony Brook, NY 11794–2100, USA.
15
Jacobs Technology Inc., NASA Johnson Space
Center, Houston, TX 77058, USA.
16
Planetary Science Institute, Tucson, AZ 85719, USA.
17
Malin Space
Science Systems, San Diego, CA 92121, USA.
18
Department of Physics, University of Guelph, Guelph, ON
N1G 2W1, Canada.
19
Space Remote Sensing, Los Alamos National Laboratory, Los Alamos, NM 87544,
USA.
20
Institut de Recherche en Astrophysique et Planétologie (IRAP), Université de Toulouse/CNRS,
31400 Toulouse, France.
21
Center for Earth and Planetary Studies, National Air and Space Museum,
Smithsonian Institution, Washington, DC 20560, USA.
22
Department of Earth and Planetary Sciences,
Washington University in St. Louis, St. Louis, MO 63130, USA.
23
Department of Earth and Space Sciences,
University of Washington, Seattle, WA 98195, USA.
24
U.S. Geological Survey, Flagstaff, AZ 86001, USA.
25
Department of Earth and Planetary Science, University of California, Berkeley, CA 94720, USA.
26
Laboratoire de Geologié de Lyon, Université de Lyon, 69364 Lyon, France.
27
Department of Geological
Sciences, University of Texas at Austin, Austin, TX 78712, USA.
28
School of Science, Rensselaer
Polytechnic Institute, Troy, NY 12180, USA.
29
Canadian Space Agency, St-Hubert, QC, J3Y 8Y9, Canada.
30
NASA Headquarters, Washington, DC 20546, USA.
31
Institute of Meteoritics, University of New Mexico,
Albuquerque, NM, 87131 USA.
32
Department of Geology and Geophysics, University of Hawaii at Manoa,
Honolulu, HI 96822, USA.
33
Department of Earth Sciences, Brock University, St. Catharines, Ontario,
Canada, L2S 3A1.
34
Department of Astronomy, Cornell University, Ithaca, NY 14853, USA.
35
Geophysical
Laboratory, Carnegie Institution for Science, Washington, DC 20015, USA.
36
Department of Earth and
Planetary Science, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
37
Lunar and
Planetary Institute, Houston, TX 77058, USA.
*Corresponding author. E-mail: grotz@gps.caltech.edu
†Present address: Department of Earth and Planetary Sciences, University of California, Santa Cruz, CA
95064, USA.
‡MSL Science Team authors and affiliations are listed in the supplementary materials.
The Curiosity rover discovered fine-grained sedimentary rocks, which are inferred to
represent an ancient lake and preserve evidence of an environment that would have
been suited to support a Martian biosphere founded on chemolithoautotrophy. This
aqueous environment was characterized by neutral pH, low salinity, and variable redox
states of both iron and sulfur species. C, H, O, S, N, and P were measured directly as key
biogenic elements, and by inference P is assumed to have been available. The
environment likely had a minimum duration of hundreds to tens of thousands of years.
These results highlight the biological viability of fluvial-lacustrine environments in the
post-Noachian history of Mars.
on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from on December 9, 2013www.sciencemag.orgDownloaded from

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 2 / 10.1126/science.1242777
risk of mobility failure.
Mapping and Geologic Framework for Exploration
Gale crater is 154 km in diameter with a central mountain of stratified
rock. Gale straddles the crustal dichotomy boundary, a topographic de-
marcation between heavily cratered uplands and sparsely cratered low-
lands. In the vicinity of Gale the dichotomy boundary is crossed by
numerous incised valley networks suggestive of surface aqueous flows
that discharged to the north across the lowlands (2). Gale’ s stratigraphy,
mineralogy, and landforms have been well studied from orbit (3–6). A
broader context for understanding Mt. Sharp has been developed (7)
along with Gale’s relevance to MSL’s goals (1, 8). The primary mission
objective is to examine the lower foothills of Mt. Sharp (Fig. 1A), locat-
ed outside of the landing ellipse, where hematitic and hydrated clay-, and
sulfate-bearing strata were detected from orbit (5, 9) and are accessible
by the rover (1).
The surface mission was planned in advance (1) to take into account
the drive distance from anywhere in the landing ellipse up to and across
the Mt. Sharp foothills, including time for sampling and analyses en
route. The landing ellipse is located in the broad valley (Aeolis Palus)
between the Gale crater rim and Mt. Sharp (Fig. 1A). Depending on
where Curiosity touched down, potential secondary science targets with-
in the landing ellipse included the Peace Vallis alluvial (water deposited)
fan lobe, a high thermal inertia terrain localized downslope from and
adjacent to the fan, several fresh craters, and inverted stream channels.
In the case of the current study, a secondary target near the landing site
became a notable objective, with the decision (10) made after landing to
drive in the opposite direction of the Mt. Sharp entry point to sample
stratified rocks of relatively high thermal inertia exposed at Yellowknife
Bay (11) (Figs. 1A and 2A).
Geologic mapping (12) building on earlier efforts (4) proved critical-
ly important to selecting the post-landing drive direction and science
targets. This work provided the broader context in which to understand
the strata drilled by Curiosity in Yellowknife Bay. The MSL team-
generated map (Fig. 1B) reveals six units (13) that are distinguished
based on variations in thermal inertia, textural attributes such as presence
of scarps and lineations consistent with bedding, surface roughness
based on shadowing, apparent relative albedo, and patterns of albedo
variation such as those indicating fractures, bedding, or mottling. These
units include: the Peace Vallis alluvial fan (“AF”); an immediately adja-
cent and downslope light-toned, bedded, fractured unit (“BF”); surfaces
with relatively high crater densities (“CS”); tonally smooth but hum-
mocky plains (“HP”); light-toned topographically variable, or rugged
terrain (“RT”); and light-toned striated rocks (“SR”). By Sol 440 the RT
and SR units had not been examined by Curiosity and are not discussed
further. Both are considered as exposures of bedrock based on textures
and higher thermal inertia values. The CS unit was inspected only from a
distance during the traverses to and from Yellowknife Bay and likely
reflects lateral equivalents of bedrock studied by Curiosity, discussed
further below.
The HP unit is exposed in the vicinity of Bradbury Landing (14) and
has lower values of thermal inertia. It is composed dominantly of loose
materials including clasts interpreted to be impact ejecta, but also dis-
plays erosional remnants of underlying bedrock. Analyzed clasts have
basaltic, alkalic (K and Na rich) compositions (15) and some clasts and
soils contain crystals of probable feldspar (16). Windows through this
material in the vicinity of Bradbury Landing, including the excavation
zones produced by Curiosity’s descent rockets, expose pebble conglom-
erate bedrock of fluvial (stream-related) origin (17).
The AF and BF units are important because of their intimate spatial
association and possible relationship to rocks exposed at Yellowknife
Bay. The AF unit is defined by the Peace Vallis fan which extends from
the northwest rim of Gale crater (Fig. 1B); it may be the youngest com-
ponent of a much more extensive alluvial plain that flanks the crater wall
(4). The Peace Vallis fan likely formed by routing of eroded crater rim-
derived rock fragments, and any materials that accumulated there after
crater formation, through Peace Vallis followed by downstream spread-
ing and deceleration of flows and deposition of sediments in the
downslope direction. The upslope part of the AF unit is marked by
smooth mottled surfaces punctuated by slope-aligned linear ridges with a
relief of 0.5-2.5 m interpreted as inverted stream channels. Downslope
this unit passes into the widespread BF unit that continues all the way to
Yellowknife Bay where it is coincident with the stratified bedrock ex-
posed there, and the terrain that marks the floor of the “bay” (18) itself.
Although map relationships suggest that the BF unit represents distal fan
facies (rock types), they do not require that the Yellowknife Bay BF
exposures are contemporaneous with the Peace Vallis lobe of the alluvial
plain; they could represent an older component of the alluvial plain,
separated from the youngest activity by an unconformity (see below).
Nevertheless, the close spatial association implies a genetic link, with
the BF unit having formed in a probably distal alluvial or even lacustrine
(lake-related) setting, consistent with earlier mapping (4).
Geologic units in the interior of Gale crater display a range of rela-
tive ages and preserve a substantial record of geologic activity since the
crater formed close to the Noachian/Early Hesperian boundary, approx-
imately at 3.7 Ga (6). The oldest units probably are of Early Hesperian
age and likely include the bulk of the alluvial plain that extends
downslope of the crater rim. The Peace Vallis alluvial lobe (map unit
“AF”) appears to represent the latest stage of transport and deposition on
the alluvial plain.
Our mapping shows that strata exposed at Yellowknife Bay are like-
ly fan, distal fan, or downslope equivalents such as lacustrine deposits.
Despite the ambiguity in the relative age of these strata, the fluvial-
lacustrine depositional context remains intact and this is what motivated
the MSL science team to explore these rocks.
Stratigraphy and Sedimentology of Yellowknife Bay Rocks
Bradbury Landing occurs near the crest of a broad topographic high,
several km in width, informally called Bradbury Rise. To the north and
east the rise descends to rocks of the BF unit. After landing, the team-
consensus decision was to traverse eastward, and downhill, to the HP-BF
contact, as close as possible to the triple junction where the CS unit also
intersects (Fig. 1B). Between Bradbury Landing and Yellowknife Bay
Curiosity crossed a straight-line distance of 445 m and descended 18 m
in elevation. Most of this distance was spent traversing the clast-strewn
HP unit, with its occasional outcrops of pebble conglomerate facies.
Beginning at the Bathurst Inlet outcrop, a succession of strata was en-
countered with good exposure down to the floor of Yellowknife Bay
(Fig. 2A). In ascending order these strata are informally named the
Sheepbed (>1.5 m thick), Gillespie Lake (~2.0 m thick), and Glenelg
members (~1.7 m thick); the assemblage of members is known as the
Yellowknife Bay formation, and the exposed section is approximately
5.2 m thick. (Fig. 3 and table S1). Strata are largely decimeter-scale in
thickness and comprise a heterogeneous assemblage of mostly detrital
sedimentary rocks of basaltic bulk composition. Breaks in outcrop conti-
nuity due to accumulated loose materials on the slope (Fig. 3) introduce
a degree of uncertainty in understanding lateral extent of bedding; the
lowest stratigraphic members (Sheepbed and Gillespie Lake) are best
exposed around the perimeter of Yellowknife Bay (Fig. 2B). The
Glenelg member contains a diverse suite of facies formed of beds with
demonstrably less lateral continuity although most beds can be traced for
at least tens of meters.
The basal Sheepbed and Gillespie Lake members are characterized
(19) by elemental compositions broadly consistent with a provenance
that, on average, is similar to typical Martian upper crust (20). In addi-
tion, these rocks carry the signal of higher thermal inertia as seen from

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 3 / 10.1126/science.1242777
orbit. Subtle geochemical variations within and between these units
mostly reflect minor variations in provenance. A striking change in
composition takes place higher in the section in the Glenelg member
(Bathurst Inlet outcrop), best reflected by a sharp increase in K
2
O con-
tents and K
2
O/Al
2
O
3
ratios (Fig. 4), suggesting a fundamental change in
the provenance to one dominated by more alkaline igneous rocks (16,
21). This change could result from either propagation of the fluvial sys-
tem headwaters into an area with more alkaline igneous rocks or a shift
to more locally derived volcanic debris, such as reworked volcanic rocks
or ash deposits (21). Major element compositions do not indicate sub-
stantial chemical weathering in the sediment source area, which impli-
cates either a frigid or arid climate, or a high relief source area
undergoing rapid erosion, or a combination of these factors (19, 21).
In general, the Yellowknife Bay formation (Fig. 4) is composed of
fine, medium, and coarse-grained sandstones of basaltic composition.
The Shaler outcrop (~125 cm thick) consists of a heterogeneous assem-
blage of interstratified platy coarser-grained beds comprising sandstones
and likely pebbly units, separated by recessive, probably finer-grained
intervals. Coarser-grained intervals are characterized by distinct decime-
ter scale trough cross-bedding (Fig. 5A). Recessive intervals are marked
by downward-tapering cracks that terminate upward at bedding planes
and are likely filled with sediment from the overlying bed. The rock
“Rocknest-3” is very fine grained, finely laminated sandstone or silt-
stone with shrinkage cracks (Fig. 5B). Volcanic or impact related base-
surge deposition is excluded by the abundance of decimeter-scale and
compound cross-bedding; absence of stoss-side cross-stratification with
preservation only of bedform toesets; and variable cross-bed dip direc-
tions. Furthermore, there are hierarchical scales of cross-stratification at
the Shaler outcrop, indicating migration of superimposed bedforms of
different scales. These attributes are most consistent with a former fluvi-
al environment characterized by bedload and suspended load transport
and variable, but net southeast flow directions. However, some eolian
bedload transport is suggested by intercalated beds with pinstripe lami-
nation. Most paleocurrent data are restricted to 90 degrees of variability
(fig. S1), however, some scatter to almost 180 degrees which is con-
sistent with migration of three-dimensional superimposed bedforms (22).
The inferred sediment transport direction suggests derivation of sedi-
ments from the direction of the Gale crater rim. A fluvial interpretation
is further supported by the tapered, likely sediment-filled cracks that are
most easily accounted for by desiccation-induced shrinkage of finer-
grained interbeds. These interbeds could represent either fluvial over-
bank deposits, slack water deposits in the troughs between bedform
crests, or intercalated tongues of proximal lacustrine facies.
The Point Lake outcrop (~50 centimeters thick) is noteworthy for its
pervasive cm-scale voids (Fig. 5C). These voids could possibly point to
a volcanic origin, specifically a vesicular lava flow (23). Alternatively, it
is possible that this facies also represents a pebbly debris flow or gas-
charged intrusive sedimentary sill (24, 25). Scattered blebs of light toned
material were evaluated as calcium sulfate by ChemCam (19) and appear
to fill voids and narrow fractures. Thus, it is possible that the rock could
be a sandstone with leached nodular evaporites (26).
The Sheepbed and stratigraphically overlying Gillespie Lake mem-
bers (Figs. 3 and 4) comprise the exposed base of the Yellowknife Bay
formation and their contact has eroded to form a decimeter-scale distinc-
tive topographic step observable in HiRISE orbiter image data (Fig. 2A).
The Gillespie Lake member consists of amalgamated, sheet-like sand-
stones. Bedding generally has a massive appearance though poorly-
defined cross-bedding is present. The basal bed of the Gillespie Lake
member is formed of poorly sorted, angular to moderately well rounded,
medium to very coarse sand of bulk basaltic composition (Fig. 5D).
Some of the largest grains have translucent luster. Very little residual
porosity between grains is evident suggesting a high degree of cementa-
tion; what porosity does exist appears as sparse, mm-scale irregular vugs
(void spaces). This basal bed has a sharp, erosional base that shows cm-
scale scouring into the underlying Sheepbed member mudstones, and
appears to show lateral variation in its thickness. The poor sorting, mas-
sive bedding and variability of grain shape in the Gillespie Lake sand-
stones are most consistent with fluvial transport and deposition. The
sheet-like geometry of the beds extending over hundreds of meters, and
absence of well-developed channel bodies may indicate deposition as
distal fan lobes, as documented in examples from ancient alluvial fans
on Earth (27).
The pebble conglomerate outcrops distributed across the HP map
unit have an uncertain stratigraphic relationship with respect to the Yel-
lowknife Bay formation. On one hand, the conglomerate exposures oc-
cur at a topographically high level above flat-lying rocks of the
Yellowknife Bay formation; the simplest interpretation would invoke
superposition and therefore a younger age for the conglomerate than the
Yellowknife Bay formation. However, regional mapping allows for, but
does not require, an alternative possibility in which flat-lying Yellow-
knife Bay rocks unconformably onlap older rocks that underlie the HP
map unit; in this interpretation the conglomerate is relatively older. Un-
fortunately, outcrop between Yellowknife Bay rocks and the nearest
conglomerate is very poor, and it is not possible to observe a contact.
Therefore, either option is possible but in either case these rocks all be-
long to the same genetically related suite of fluvial-lacustrine sediments
derived from the crater rim.
Sheepbed Mudstone Member
At a minimum, the Sheepbed member extends laterally across the width
of the outcrop belt traversed by the rover—approximately 60 m. The
Sheepbed member closely coincides with the BF map unit, and from
orbit is highlighted by its light tone and extensive meter- to decameter-
scale fracture network. Tracing of the distinctive erosional profile of the
Sheepbed-Gillespie Lake contact shows that the Sheepbed member like-
ly extends around the full width of Yellowknife Bay and covers a mini-
mum area of about 4 km
2
. However, we presume the Sheepbed member
extends beneath the overlying rocks of the Gillepsie Lake member, and
therefore these are highly conservative minimum estimates. A reference
section localized near the Selwyn target (Fig. 3) yields a thickness of 1.5
m for the member. This is a minimum thickness because its base is not
exposed.
A detailed traverse (Selwyn reference section) using Mastcam,
ChemCam, APXS, and MAHLI measurements was conducted across the
Sheepbed member for the purpose of providing context for the first sam-
ples obtained by drilling (Figs. 3 and 4). Observations revealed a patchy
distribution of diagenetic (post-depositional) features, including nodules
and veins, discussed below. Mineralogic data show that the Sheepbed
member has a substantial quantity of saponitic smectite clay minerals
(~20%), likely formed by aqueous alteration of olivine (28). Geochemi-
cal results (19) show that both Sheepbed and Gillespie sediments were
derived from a provenance with a composition similar to average Mar-
tian crust, and which experienced negligible chemical weathering before
deposition at Yellowknife Bay. Relatively subtle differences exist be-
tween lower and upper parts of the Sheepbed, such that the top exhibits
higher Al
2
O
3
/TiO
2
and Ni, consistent with a slight provenance change. A
further change in trace elements (higher Cr, lower Ni, Ge) occurs across
the Sheepbed – Gillespie Lake contact that could result either from prov-
enance differences or mineral sorting (e.g., chromite) associated with
grain size differences. Both APXS measurements and high spatial reso-
lution ChemCam targeted analyses provide evidence that crosscutting
veins and fractures are composed of Ca-sulfate (see below).
Highest resolution MAHLI images were acquired on Sol 150
(Ekwir) and on Sol 169 (Wernecke) following brushing of the outcrop
(Fig. 5E). These images reveal a very fine grain size based on the out-
lines of darker grains and nearly all discernable grains are finer than 50

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 4 / 10.1126/science.1242777
μm. By definition, a mudstone is a fine-grained sedimentary rock com-
posed of 50% or more particles smaller than 62 μm (29). Although we
cannot directly resolve and observe these <50 μm grains, we do know
that ~20% are clays. It seems likely that the entire Sheepbed member is
finer than most facies observed by Curiosity during the traverse down to
Yellowknife Bay. Drilling of the outcrop produces gray powder and
cuttings, substantially different in color from the modern surface (Fig.
5F). Inspection of the drill hole reveals a gray rock that is fine-grained
and homogeneous in texture, with the exception of light-toned mineral-
filled fractures.
Independent evidence for the fine grain size of the Sheepbed mud-
stone comes from inferences of the physical responses of brushing and
measurements made during drilling. The rotary motion of bristles during
brushing substantially scored the surface of the outcrop in a fashion that
shows deflections (Fig. 5E) around apparently harder, embedded dark
nodules suggesting the mudstone matrix is softer. Comparison with ter-
restrial analog data suggests weak/medium hardness for the mudstone
(30). Additional estimates of rock hardness are provided by comparison
of rover engineering testbed data derived from terrestrial analogs with
drill hardness data from the Sheepbed member (31). These datasets sug-
gest the Sheepbed rock is comparable to fluvial to lacustrine silt-
stones/mudstones collected from the ~10 million year-old Ridge Basin
of southern California (buried to depths of several km) but not as hard as
feldspathic sandstones derived from the same basin, or as soft as pure
commercially available kaolinite.
Sheepbed mudstones contain a few very thin intercalated beds that
resist erosion (Fig. 4). These interbeds have not been studied in detail,
but Mastcam data show them to be 1-2 cm thick and with substantial
lateral continuity as some can be traced for >100 m. Overall the primary
texture and grain size has a very uniform, massive appearance; it is well
known, however, that lamination can be difficult to detect in many mud-
stones (29).
The very fine grain size, its apparently uniform distribution through
the member, and the substantial lateral extent of cm-scale interbeds are
all consistent with deposition of the primary grains due to settling from
suspension, either from the atmosphere or a water column. The former
might involve volcanic ash, eolian dust, or very distal impact fallout.
Because the composition of the Sheepbed mudstone is basaltic and we
cannot ascertain the very finest grain sizes, it is hard to discount an air-
fall origin. However, mapping relationships, regional context, and local
sedimentologic constraints all point to a distal alluvial fan or proximal
lacustrine setting. In this setting, sediment-laden fluvial flows can depos-
it extensive fine-grained deposits either as overbank flood deposits or at
their downstream termination where they enter a body of standing water,
such as a lake. Here, the decrease in flow turbulence as flows thin over-
bank and spread when leaving a channel, or encounter the still water of a
lake, leads to deposition of suspended fines. We favor the lake interpre-
tation because of the lateral extent and thickness of the Sheepbed mem-
ber, the absence of fluvial channel bodies laterally adjacent to mudstone
beds, and the fact that the mudstone underlies the Gillespie Lake mem-
ber fluvial sheet sandstones over a large areal extent. Given our limited
observations it is difficult to exclude the hypothesis that this lake may
have been seasonally dry (playa), or if it responded to longer-term
wet/dry climatic fluctuations. However, the compositional data favoring
low salinity for the lake waters (19) and specific diagenetic textures
discussed below (cement-filled synaeresis cracks, rather than sediment
desiccation cracks) suggest that it was perennially wet for the strati-
graphic interval that we examined.
Strata dominated by fluvial sediments that predate the advent of ter-
restrial vegetation on Earth are generally devoid of fines except as occa-
sional mud drapes that are preserved between sets of cross-stratified
dune or bar deposits (32, 33). Sweeping of very broad and shallow chan-
nels that produce sheet flood deposits result in reworking of thin flood-
plain deposits that tend to not be preserved in the stratigraphic record. In
addition, eolian reworking between flow events—in the absence of ter-
restrial vegetation to anchor fines—is also regarded as an efficient
mechanism to sweep fines away from sites of deposition. Thus, a shal-
low lacustrine environment, which sequesters fine sediments over long
time scales, is considered to be the most likely interpretation for the
Sheepbed mudstone.
The grain size and composition may be inconsistent with typical
Mars dust, which is even finer in grain size and characterized by SO
3
contents approaching 7% (20, 34) rather than the Sheepbed mudstone
which is closer to 1% SO
3
(19). Although it seems conceptually possible
to deposit relatively thick intervals of dust (35, 36) this might not be
expected on an alluvial fan that is intermittently active enough to result
in the substantial amounts of coarser-grained sediment accumulation
seen in the Yellowknife Bay formation. Furthermore, estimates of dust
accumulation rates are very low [on the order of 10 cm/My (37)] as
compared to fluvial or even lacustrine sediment accumulation rates
which are orders of magnitude higher (38).
Sheepbed compositions likely discount an origin as pure volcanic
ash. Apart from variation imposed by sulfate-rich diagenetic features, the
Sheepbed is geochemically uniform with an adjusted volatile-free com-
position close to average Martian crust (19). Individual volcanic ash
eruptions might be expected to display some variation in composition
and it would be coincidental for individual eruptions to all have a com-
position essentially the same as the average crust. If the >1.5 m thick
Sheepbed member represented a single eruption this would require a
local source that is not observed in the vicinity of Gale crater [likely
within a few tens of km for 1 m thickness (39)].
Diagenesis of the Sheepbed Mudstone
A diverse set of diagenetic features that postdate deposition is observed
in the Sheepbed mudstone member. Early diagenetic features include
“nodules,” “hollow nodules,” and “raised ridges” (Figs. 6, A to C).
These features are crosscut by later fractures, filled with light-toned
cements (Fig. 6D) shown to be variably hydrated sulfate minerals based
on ChemCam, APXS, Mastcam and CheMin data. Additionally, a dike-
like feature, known as the “snake” obliquely crosscuts the Sheepbed-
Gillespie Lake contact and extends for several meters (Fig. 3).
Concentrations of nodules and hollow nodules have patchy distribu-
tions and pass laterally (Fig. 7) into mudstones that have raised ridges.
Nodules are expressed as mm-scale protrusions of the outcrop with
three-dimensional differential relief suggesting crudely spherical geome-
try (Fig. 6A). The mean diameter of 4501 nodules is 1.2 mm, with min-
imum/maximum diameters of 0.4/8.2 mm. Brushing shows that nodules
are more resistant to brush-induced etching, and thus harder, than the
surrounding mudstone (Fig. 5E). Mastcam, MAHLI and ChemCam Re-
mote Micro-Imager (RMI) data show that nodules are dispersed from
one another, cluster in patches (Fig. 7), do not form their own beds, and
show no evidence of size grading despite a broad range in diameters.
These constraints suggest that the nodules are of concretionary origin
rather than volcanic or impact lapilli (40, 41). Furthermore, no associat-
ed outsized clasts that might be interpreted as potential bombs, or any
breccias are observed. Comparison of John Klein (fewer nodules and
hollow nodules) and Cumberland (more nodules and hollow nodules)
compositional data indicates that nodule and hollow nodule rim growth
may have involved iron-bearing compounds such as the mineral akaga-
neite or even clay minerals (19, 28).
Hollow nodules are mm-scale circular rims with hollow centers (Fig.
6B). Three-dimensional exposures sometimes reveal pedestal-like struc-
tures with a circular rim surrounding a hollow, bowl-like depression.
The outcrop therefore has a locally pitted appearance, suggesting ero-
sional exposure of approximately spherical voids that had resistant rims,
similar to the nodules. Resistance to weathering by the rims of the hol-

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 5 / 10.1126/science.1242777
low nodules is indicated by the presence of lineations and “wind tails”
carved into the outcrop, presumably by eolian saltation abrasion. Devel-
opment of pedestals likely records lowering of the outcrop surface by
prolonged eolian abrasion. Mastcam, MAHLI and ChemCam RMI data
show that hollow nodules are similar in size to nodules with mean diam-
eters of 1.2 mm, and minimum/maximum diameters of 0.6/5.6 mm (n =
1248). We note that the upper size limit of hollow nodules is considera-
bly smaller than that for nodules. The interior mean diameter of the void
space defining the “hollow” is 0.7 mm (n = 45).
Hollow nodules are regarded as void spaces preserved within the
Sheepbed mudstone. However, the hollow nodules are distinctly differ-
ent from mm-scale diagenetic vugs, such as in the Gillespie Lake mem-
ber or Burns formation of Meridiani Planum (40), in that the hollow
nodules are associated with a ubiquitous circumscribed rim. Spherical
voids of this type have not been observed previously on Mars, and per-
haps relate to their ability to be preserved—in this case within fine mud-
stone sediments. Two options are possible to explain the void space,
which creates the hollow observed in outcrop. In the first hypothesis the
void space would represent a vanished mineral, whose higher solubility
allowed easy dissolution during subsequent diagenetic fluid percolation
events. Such minerals might have grown displacively in the sediment,
for example, in evaporites (26), thereby eliminating the need for the void
to have been primary. However, no examples of filled hollow nodules
were observed, with one very specific exception: where hairline frac-
tures filled with light toned sulfate minerals intersect hollow nodules
then the hollow nodules also are filled with sulfates. Otherwise hollow
nodules are devoid of any remnant of an earlier mineral. The sulfate-
filled fractures represent a later phase of diagenesis (see below) and
therefore the sulfate minerals are not considered part of the primary en-
vironment.
This allows for a second hypothesis in which the hollow nodules
represent primary voids, such as gas bubbles formed during or soon after
deposition. Several mechanisms could generate gas during or after sedi-
mentation including diagenetic dissolution/precipitation reactions that
might produce gas as a byproduct. These might include hydrogen gas
produced during authigenic clay mineral formation via olivine “saponiti-
zation” (28); UV photo-oxidation of reduced minerals such as siderite to
produce authigenic iron oxide (e.g., magnetite) and hydrogen gas (42);
pressure-induced release of dissolved gas from sedimentary pore fluids;
and processes that reflect unique Mars environments such as boiling of
water in the presence of critically low atmospheric water vapor pressure.
Data are insufficient to distinguish among these possibilities. However,
the last of these can be discounted by the presence of thin interbeds with-
in the Sheepbed mudstone, which suggest that wholesale churning of the
mudstone did not occur. A final possibility considers the potential role of
microbes, if life had ever evolved on Mars. Terrestrial sediments are
pervaded by microbes, which produce a variety of gases that become
trapped as bubbles where lithification is early and rapid (43). However,
it should be clear enough that this mechanism can only be invoked as a
serious possibility after all other abiotic hypotheses have been discount-
ed. This is not the case for our current data set and we include this only
for the sake of completeness.
Raised ridges (44) are narrow, curvilinear ridges that weather in
raised relief and, as mentioned above, they substitute laterally for nod-
ules and hollow nodules (Fig. 7). The raised ridges are restricted to the
Sheepbed mudstone but one poorly constrained example was noted at a
higher stratigraphic level (observed only from a distance; exact strati-
graphic position and facies are uncertain). Measurement of 1619 raised
ridges in the Sheepbed suggests they extend at least several centimeters
in length and have a mean width of 2.7 mm, with maximum widths of up
to 5.8 mm. Raised ridges have spindle-shaped, pointed terminations (Fig.
6C). Most have subvertical orientation, but can dip more gently, down to
45 degrees or less, and their strike trends in all directions (Fig. 6C).
Ninety-degree intersections between ridges are common. A distinctive
attribute is that most ridges show internal banding which contours the
trend of the ridge, following closely all local deviations including right-
angle bends. Two parallel bands are most common, although three to
four are also observed (Fig. 6C). Raised ridges are most simply inter-
preted as early diagenetic cracks that formed in consolidated or even
partly lithified mudstone, then filled with one or more generations of
cement that isopachously encrust the margins of the cracks. This infilling
material has greater resistance to eolian erosion than the mudstone re-
sulting in its expression as ridges. ChemCam and APXS analyses have
identified elevated Mg, Fe, Si, Cl, Li and Br in the raised ridges but in-
sufficient evidence exists to confidently identify specific mineral phases
(19). A strong correlation exists between Mg, Fe and Cl possibly indicat-
ing a chloride phase may be present, but if so, it can only explain a small
amount of the Mg and Fe enrichment. Alternatively, the correlation
could result from a phase other than a chloride that contains substantial
Cl. For example, CheMin data suggest the presence of akaganeite (28).
Taken alone, the development of very early cracks in fluvial to la-
custrine mudstones might be most simply explained by desiccation of
wet sediment and, generally, desiccation cracks have polygonal geome-
try. Therefore, the non-polygonal geometry of the cracks is unexpected,
as is the isopachous, banded materials that fill in the fractures. Further-
more, the abundance of raised ridges is anti-correlated with the abun-
dance of nodules/hollow nodules, suggesting that all three phenomena
are genetically related, which is not something that is observed for des-
iccation cracks on Earth. An alternative mechanism would postulate that
syn-depositional pore fluids (perhaps mixing with surface runoff waters)
may have been important in driving diagenetic reactions that triggered
early mineral precipitation, gas production, and volume contraction close
to the sediment-water interface. On Earth, a related but poorly under-
stood process known as “synaeresis” is thought to relate to clay mineral
flocculation during mixing of saline and less saline waters, resulting in
differential contraction of the substrate (45). Seismic shaking, perhaps
induced by impacts on Mars, may help facilitate this process (46). The
result is spindle-shaped cracks, a few centimeters long that look very
much like the Sheepbed raised ridges. In most cases on Earth, the cracks
are filled by other sediments, however, in one very particular instance
known as “molar tooth structure” spindle-shaped cracks and related sub-
spherical voids are filled with mineral (calcite) cement. The origin of
subaqueous cracks on Earth is poorly understood, though the involve-
ment of gas in generating the cracks and voids represented by molar
tooth structure is likely (43, 47). As with the hollow nodules, a number
of processes could generate gases in Martian sediments. In general the
distribution of subaqueous shrinkage cracks reflects differential strength
of the substrate materials, which may similarly be represented in the
Sheepbed member by the spatial segregation of the nodules/hollow nod-
ules versus raised ridges.
A unique feature within lower Yellowknife Bay strata is a dike-like,
dark-toned rock unit referred to as the “snake,” named after the target
“Snake River” (see Fig. 3). This feature extends from the lowest strati-
graphic level of the exposed Sheepbed member, crosscuts the Sheepbed-
Gillespie Lake contact, and tapers out within the middle of the overlying
Gillespie Lake member (Figs. 3 and 4). The “snake” is 6-10 cm wide and
can be traced across bedding for about 5 m, cutting up through almost 1
m of stratigraphic section. MAHLI images of unbrushed parts of the
snake suggest it has a fine-grained clastic texture, but with larger frag-
ments present suggestive of intraclasts (fig. S2). Elemental data show it
to be similar in major elements but distinct from the Sheepbed member
in trace element abundances (19). The “snake” can be traced to its strati-
graphically highest position where it terminates in a small anticline. At
this terminus thicker, massive beds extend laterally away from the core
of the anticline. The “snake” has several possible interpretations includ-
ing a narrow igneous dike of basaltic composition; a large-scale crack

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 6 / 10.1126/science.1242777
that is filled from above, perhaps associated with subaerial exposure or
ice wedging; or a sedimentary intrusion associated with compaction and
dewatering of the mudstone or subjacent strata.
The fine-grained, basaltic composition of the “snake” makes it hard
to exclude an igneous intrusion with basaltic composition. The feature is
so thin that grain-size variations consistent with chilled margins would
be unexpected at scales within MAHLI’s limit of resolution; the entire
dike would be expected to be very fine grained. Filling from above is
discounted due to the presence of the small anticline, which suggests
injection of fluidized material from below rather than settling of sedi-
ment from above. In addition, no evidence of layering—suggestive of
downward percolation of sediments—is observed within the feature.
Furthermore, no other crack-like features are observed to extend down-
ward from a common stratigraphic surface. The third possibility—
intrusion of plastically-deformed sedimentary materials—occurs in some
sedimentary environments with high sedimentation rates (24, 25, 48, 49).
Upward and lateral injection of compacting muds and sands is most
commonly expressed as dikes and sills that both crosscut strata and in-
trude along bedding planes. The similarity of both composition and tex-
ture to that of the Sheepbed mudstone, the presence of possible
intraclasts, and upward deflection of strata at its terminus are all con-
sistent with sedimentary injection (24, 25). This suggests a sediment
accumulation rate for the Yellowknife Bay formation (or sediments be-
low it) that was high enough so that pore fluid pressures built up to the
point where expulsion along discrete zones of weakness, rather than
along grain boundaries, was the preferred pathway for escape of com-
pacting sediments and interstitial pore fluids. As the porosity and perme-
ability of the sediment was reduced via compaction and cementation, the
strata may have ruptured allowing fluids to escape and form sedimentary
dikes and sills. Finally, this process could have been aided by impact-
induced seismic activity (50).
Fractures filled with light-toned sulfate cements also are regarded to
have formed later in the diagenetic sequence because they cut the entire
Yellowknife Bay formation. In contrast to the raised ridges, the sulfate-
filled fractures are flush, even slightly depressed, with respect to adja-
cent unfractured outcrop (Figs. 6 and 7). Sulfate-filled fractures have
highly diverse orientations spanning from vertical to sub-horizontal,
range in length from less than 1 cm to over 30 cm, and range in width
from “hairline” (sub mm) to 8 mm, with a mean width of 2.3 mm (Figs.
5E and 6D). MAHLI images of the John Klein drill hole show that hair-
line-width sulfate-filled fractures have complex orientations with hori-
zontal as well as vertical trends (Fig. 5F). Where these hairline-width
fractures intersect hollow nodule void spaces (Fig. 5E), the latter also are
filled with hydrated as well as anhydrous calcium sulfate minerals as
determined by CheMin, ChemCam, and APXS data (19, 28). At a larger
scale, the observation of fracture-filling hydrated sulfate mineralogy can
be extended through Mastcam observations. Calibrated Mastcam spectra
show evidence for hydration associated with most, but not all of the
fracture fills, including limited hydration in hairline fractures that pene-
trate and fill the void space of hollow nodules (28).
To form, the sulfate-filled fractures first require lithification of the
Sheepbed and Gillespie Lake members in order to allow applied stress to
cause brittle strain of the bedrock (51). Once open, the fracture networks
then act as conduits for fluid transport resulting in precipitation of ce-
menting minerals within these initially low permeability sedimentary
rocks. Possibly the fracture networks were created by hydraulic fractur-
ing due to high fluid pressures that would have been obtained during
burial of Yellowknife Bay strata (51). The variation in hydration state of
vein-filling sulfate mineralogy between gypsum, bassinite, and anhydrite
could reflect primary variations in environmental conditions during dep-
osition or, alternatively, diagenesis associated with burial and/or desicca-
tion during subsequent erosion and exposure (28).
A final observation regarding later diagenesis concerns the Gillespie
Lake sandstone member, which shows evidence for possible secondary
porosity. Irregular vugs larger than the diameter of the average grain size
(Fig. 5D) suggest that larger grains, or perhaps clusters of grains, were
leached during fluid circulation. Alternatively, it is possible that these
vugs represent intraclasts of mudstone that degraded by weathering.
Another possibility is dissolution of preferentially more soluble early
diagenetic minerals; however, the irregular shape of the vugs is not con-
sistent with dissolved evaporite crystals.
In summary, the diagenesis of the Sheepbed member suggests a
complex aqueous history involving at least two distinctly different water
masses. Following emplacement in distal alluvial to lacustrine environ-
ments, pore spaces in primary sediments were occluded by cements, and
early diagenetic hollow nodule voids (gas bubbles?) may have been
formed, along with concretions. At approximately the same, time non-
polygonal fissures in the lithifying sediment opened up and became lined
with void-filling isopachous rim cements. All these events, with the
exception of hollow nodule void formation, must have occluded much of
the primary porosity. This episode of diagenesis did not substantially
change the bulk rock chemistry of these units relative to average Martian
basalt and are thus considered to have involved isochemical alteration
(19). This suggests that clay mineral and magnetite formation happened
largely in situ, as a result of alteration of olivine to form authigenic sap-
onitic smectite (19, 28). In addition to pore filling cement, it is possible
that these minerals also precipitated as concretions as well as isopachous
rim cements within raised ridge fractures. Following lithification, frac-
ture porosity was created that was then filled with a distinctly different
fluid that resulted in precipitation of sulfate cements (19, 28). The ab-
sence of elevated sulfate abundances in the Sheepbed mudstone, except
for within these fractures, indicates that cementation and permeability
reduction of the mudstone was extensive enough so that sulfate-rich
fluids percolating through fractures and hairline fractures did not invade
the mudstone or sandstone matrix (19, 28). The first diagenetic fluid,
possibly derived from the waters that transported sediments, was domi-
nated by dissolved silicate and iron oxide minerals. The second, subse-
quent fluid was dominated by sulfates and perhaps sampled a broader,
basin-wide hydrologic system. CheMin and SAM data additionally point
to a substantial x-ray amorphous fraction of material that could have
been involved in diagenesis, as well as potential sulfide minerals (28,
52).
Sheepbed Mudstone: Record of Habitable Environment
The regional geologic context, sedimentologic framework, and geo-
chemistry and mineralogy of the Sheepbed mudstone all point to an an-
cient environment that would have been habitable to a broad range of
prokaryotic microorganisms. The relatively neutral pH indicated by clay
mineral stability (28), high water activity indicated by low salinity for
primary and early diagenetic environments (19), the variable redox states
indicated by presence of magnetite, sulfate and sulfide minerals and
compounds (28, 52), and the apparent long duration of the aqueous envi-
ronment(s) all support this interpretation.
The Sheepbed mudstone closely coincides with the BF map unit
(Fig. 1) suggesting that this rock unit may have extended beyond the
confines of Yellowknife Bay and minimally covered an area of ~30 km
2
,
not including buried or eroded equivalents. Repeated flows of water (17)
and the likely presence of a body of standing water point to a sustained
habitable environment. The durations of the primary, early diagenetic,
and later diagenetic aqueous environments were substantial enough to
create geologic and geochemical fingerprints of prolonged fluvio-
lacustrine and diagenetic processes remarkably similar to those that
formed commonly during early Earth history (32, 53, 54).
A rough estimate of the minimum duration of the lacustrine envi-
ronment is provided by the minimum thickness of the Sheepbed mem-
ber. Given 1.5 m, and applying a mean sediment accumulation rate for

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 7 / 10.1126/science.1242777
lacustrine strata of 1 m/1000 years (38) yields a duration of 1500 years.
Lacustrine sediment accumulation rates vary by several orders of magni-
tude (38), thus the hypothesized lake could represent hundreds to tens of
thousands of years. If the aqueous environments represented by overly-
ing strata are considered, such as the Gillespie Lake and Glenelg mem-
bers, then this duration increases. Indeed, the regional geologic context
suggests that the Yellowknife Bay formation may be just a small part of
a thick series of fluvio-lacustrine rocks that may exist in the subsurface
for hundreds of meters. Moreover, it is possible that hundreds of meters
of fluvial-lacustrine strata have been eroded. The sulfate-filled fractures
are consistent with some amount of burial, and independent support for
this is allowed (but not required) by possible incipient chloritization of
mudstone smectite (28). Therefore, it is entirely plausible that, collec-
tively, these hundreds of meters of strata could represent millions to tens
of millions of years.
Episodic drying of this lake environment seems certain over this
long time scale if not over shorter spans represented by thicknesses
equivalent to the exposed Sheepbed mudstone. However, even if the lake
was dry periodically, or if unconformities interrupted the continuity of
fluvial-lacustrine sedimentation, the presence of former groundwater—
well documented for many ancient Mars phenomena (55–57)—may
have provided a refugium to sustain a chemolithotrophic biosphere. Epi-
sodic lake rejuvenation would permit a subsurface chemoautotrophic
microbiota to emerge to the surface in response to a rise in groundwater
level.
We can more specifically assess the habitability of the former envi-
ronment represented by the Sheepbed mudstone from a perspective
shaped by our knowledge of terrestrial biology. This approach involves
identification of the chemical and physical environmental requirements
that would support prokaryotic microbes, if similarly simple forms of
life had ever evolved on Mars. Bacteria and archaea represent ancient,
abundant and metabolically diverse domains of life on Earth and are able
to withstand a wide range of environmental conditions (58–61). They
can engage in a multitude of autotrophic and heterotrophic pathways,
and utilize a variety of electron donor/acceptor pairs for acquisition of
carbon and energy (62–65). We can envisage many combinations of
terrestrial microbes that would be suited to form a Martian biosphere
founded on chemolithoautotrophy at Yellowknife Bay.
As a first step it is useful to assess the key nutrients required to sup-
port terrestrial bacteria and archaea (66). The defining chemistry is inor-
ganic: elemental inventory, liquid water, Eh, pH, redox couples, and a
diversity of chemical compounds. Organic molecules are not required
environmental constituents because they can be synthesized de novo
through the “primitive” autotrophic pathways such as methanogenesis
and acetogenesis (67). We have measured H, O, S, C, N and P in miner-
als and other compounds with the APXS, ChemCam, CheMin, and SAM
instruments, as well as important metals such as Fe, Mg, and Mn (19, 28,
52). All but P are observed in SAM EGA data as volatiles and all but P
and N are known to be part of mineral structures observed in CheMin
data. We do not have the capability to determine whether P would have
been bioavailable, and CheMin observed no highly soluble P-bearing
minerals. On the other hand, CheMin data indicate substantial break-
down of olivine in the mudstone at Cumberland (28) and P can be a trace
to minor element in that mineral (68) suggesting potential P mobility
during diagenesis. Nitrogen-bearing compounds, in both reduced and
oxidized forms, were measured by SAM during EGA (52). Evolved NO
(m/z 30) has an abundance that is substantially above background, point-
ing to a likely source within the mudstone. Bio-available N conceivably
could have been derived from the atmosphere via fixation by sulfide
minerals during reactions similar to that seen in pyrrhotite, pyrite, and
magnetite assemblages on Earth (69, 70).
SAM EGA data from John Klein show carbon to be present, either in
crystalline (carbonate?) phases below 1% abundance, as a carbonate-
bearing component in the x-ray amorphous material detected by Che-
Min, or derived from complex organic sources not detectable by SAM.
Thus, most or all the major ingredients required to support life are pre-
sent in the Sheepbed mudstone.
As a second step, we identify plausible redox couples represented by
minerals and other compounds preserved in the Sheepbed mudstone that
might have comprised basic energy-yielding reactions for an elementary
microbial community (66). The presence of both sulfur and iron is indi-
cated by ChemCam, APXS, CheMin and SAM data. Further, observa-
tion of key inorganic volatiles such as H
2
O, H
2
S, SO
2
, H
2
and CO
2
,
generated during SAM pyrolysis (52), suggests a wider range of redox
conditions for the surface of ancient Mars than previously recognized
based on Viking, Phoenix, and MER data (71–74). For example, SAM
analysis of the John Klein sample shows higher H
2
S/SO
2
average ratios
than were found for the Rocknest soil sample—0.06 for John Klein (52)
versus 0.01 for Rocknest (75). These data suggest a higher proportion of
reduced sulfur relative to oxidized sulfur pointing to a plausible redox
couple for prokaryotic respiration.
Iron also presents intriguing possibilities for redox coupling. Che-
Min analyses indicate the presence of a substantial quantity of likely
authigenic magnetite (~7% of crystalline components) in Sheepbed mud-
stones (28). The presence of an authigenic, partially reduced Fe-oxide
phase in a Martian sedimentary rock represents a notable departure from
previous secondary Fe-mineral detections on Mars, where ferric iron has
proven to be the dominant redox state (76–78). The magnetite measured
by CheMin does show evidence for oxidation of some of its ferrous iron
to form the ferric defect-spinel maghemite (28). The gray color of the
freshly exposed Sheepbed mudstone (Fig. 5F) contrasts sharply with the
reddish color of the freshly exposed, highly oxidized, hematite-bearing
rocks of Meridiani Planum (79) emphasizing the lower oxidation state of
iron in the Sheepbed mudstone. There are a number of potential mecha-
nisms for the production of authigenic magnetite, all of which are pro-
moted by waters with relatively low Eh and neutral to alkaline pH (80).
Under such conditions, aqueous Fe
2+
-hydroxide species can precipitate
and ultimately transform to magnetite. Perhaps not coincidentally, neu-
tral-to-alkaline pH conditions also are likely to promote the formation of
clay minerals. Potential authigenic magnetite formation pathways in-
clude UV-promoted reactions with dissolved Fe
2+
in the water column
(81) or with carbonate minerals in the sediment (42), and partial oxida-
tion of dissolved Fe
2+
by dissolved O
2
(80). Perhaps the most likely sce-
nario is via clay formation and “saponitization” (28). However the
magnetite may have formed, the additional presence of Fe
3+
in
nanophase iron oxide indicated by combined APXS/CheMin, and SAM
data (19, 28, 52), provides the other half of an iron-based redox couple
in the Sheepbed mudstone.
Salinity provides another important constraint on habitability be-
cause it affects water activity, which, when low, can restrict cellular
physiology (82–84). All natural waters contain dissolved ions that,
through their interactions with water molecules, limit the availability of
H
2
O for hydration reactions. Water activity is defined by microbiologists
as a
w
= n
1
/(n
1
+n
2
), where n
1
equals moles of water and n
2
equals moles
of solute (82). Most terrestrial organisms cannot survive below a
w
= 0.9,
a few halophilic bacteria grow at a
w
=0.85, and some archaea can grow at
a
w
= 0.75 (83). In the Burns formation at Meridiani Planum, the abun-
dance of calcium and magnesium sulfate minerals detected by the Op-
portunity rover is so great that it conservatively reconstructs to an
ancient water activity of a
w
= 0.78-0.86, and possibly as low as a
w
= 0.5
(85). This shows that water activity was so low during deposition and
diagenesis of the Burns formation that even though water was present,
the environment would likely have been uninhabitable to all but the har-
diest halophiles (86). In contrast, the Sheepbed mudstone provides evi-
dence for both low salinity sediment-transporting water and early
diagenetic water given its very low sulfur and chlorine content (19). It is

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 8 / 10.1126/science.1242777
possible that small amounts of chloride salt were present (19, 28), how-
ever, these were in low enough abundance (<1-2%) so as to not substan-
tially reduce water activity and create a challenge for prokaryotic
microbes. Higher salinities are indicated for the waters that percolated
through late diagenetic fractures; however, these were likely of modest
salinity given their exclusively calcium sulfate composition (85). On
Earth, calcium sulfate precipitation is common in evaporitic environ-
ments that thrive with diverse microorganisms (87). Furthermore, there
is evidence that halophiles may resist the destructive effects of radiation
(88), thought to limit habitability in the Martian surface environment
(89).
Finally, estimates of pH are similarly important for understanding
habitability. Again, in the Burns formation at Meridiani Planum, the
presence of jarosite indicates low pH with ancient waters that contained
sulfuric acid (40). However, such low pH does not discount the presence
of life; terrestrial analog environments show that microbes can survive
under these conditions because they have adapted their biochemistries to
maintain near neutral conditions internally (90). Nevertheless, the pres-
ence of more neutral waters allows a broader range of microorganisms to
be viable. The presence of clay minerals in the Sheepbed mudstone,
absence of any evidence for Al mobility and the absence of iron sulfate
minerals, even in the sulfate-filled late diagenetic veins, indicates a rela-
tively neutral pH. This neutral pH could have existed for all phases of
aqueous history, from the primary waters of deposition that may have
created a body of standing water, to early diagenesis, and through the
close of late diagenesis.
At Yellowknife Bay there is no hint of the strongly acidic conditions
that have been thought to especially describe the planet’s younger histo-
ry of aqueous alteration, sedimentation, and habitability (74, 83, 91). The
record of aqueous activity at Yellowknife Bay is likely prolonged and
complex, involving several stages of diagenesis, including clay for-
mation, that culminate with precipitation of calcium sulfate salts in
veins, but without attendant indicators of acidic waters such as iron sul-
fates. The simplest interpretation of the sequence of diagenetic events
would involve progressive desiccation of mildly saline, pH neutral wa-
ters—a very Earth-like scenario (92). Such conditions have been envis-
aged for the very early history of Mars (91), but it is only recently that
they have been considered viable for a younger age (7, 93, 94). The sur-
prising result is that the stratigraphy of Yellowknife Bay may not only
preserve evidence of a habitable environment, but one that is relatively
young by Martian standards. In the most conservative scenario allowed
by geologic mapping, the Yellowknife Bay formation represents part of
the older fill of Gale crater, and therefore roughly Early Hesperian in age
(6), perhaps overlapping with or post-dating times of bedded sulfate
formation elsewhere on Mars. This would indicate that times of sus-
tained surface water, neutral pH, and authigenic clay formation extended
later into Mars’ history. The potentially young age of clay formation
(and habitability) does not invalidate the general trend that most rocks
that interacted with water early in Mars’ history produced clays, and
those that interacted later produced sulfates. However, much like Earth’s
time-dependent records of iron formation (95, 96) and carbonates (97,
98), it points to the need to understand those special conditions which
allow a distinctive aqueous environment to persist for broad spans of
geologic time, or to recur when the favorable conditions again emerge.
Curiosity’s detection of a relatively young, and strikingly Earth-like
habitable environment at Gale crater underscores the biologic potential
of relatively young fluvio-lacustrine environments.
References and Notes
1. J. P. Grotzinger, J. Crisp, A. R. Vasavada, R. C. Anderson, C. J. Baker, R.
Barry, D. F. Blake, P. Conrad, K. S. Edgett, B. Ferdowski, R. Gellert, J. B.
Gilbert, M. Golombek, J. Gómez-Elvira, D. M. Hassler, L. Jandura, M.
Litvak, P. Mahaffy, J. Maki, M. Meyer, M. C. Malin, I. Mitrofanov, J. J.
Simmonds, D. Vaniman, R. V. Welch, R. C. Wiens; Mars Science Laboratory
Mission and Science Investigation, Mars Science Laboratory Mission and
Science Investigation. Space Sci. Rev. 170, 5–56 (2012). doi:10.1007/s11214-
012-9892-2
2. R. P. I. Irwin III, A. D. Howard, R. A. Craddock, J. M. Moore, An intense
terminal epoch of widespread fluvial activity on early Mars: 2. Increased
runoff and paleolake development. J. Geophys. Res. 110, E12S15 (2005).
doi:10.1029/2005JE002460
3. M. C. Malin, K. S. Edgett, Sedimentary rocks of early Mars. Science 290,
1927–1937 (2000).doi:10.1126/science.290.5498.1927 Medline
4. R. B. Anderson, J. F. Bell III, Geologic mapping and characterization of Gale
Crater and implications for its potential as a Mars Science Laboratory landing
site. The Mars Journal 5, 76–128 (2010). doi:10.1555/mars.2010.0004
5. R. E. Milliken, D. L. Bish, Sources and sinks of clay minerals on Mars. Philos.
Mag. 90, 2293–2308 (2010). doi:10.1080/14786430903575132
6. B. J. Thomson, N. T. Bridges, R. Milliken, A. Baldridge, S. J. Hook, J. K.
Crowley, G. M. Marion, C. R. de Souza Filho, A. J. Brown, C. M. Weitz,
Constraints on the origin and evolution of the layered mound in Gale Crater,
Mars using Mars Reconnaissance Orbiter data. Icarus 214, 413–432 (2011).
doi:10.1016/j.icarus.2011.05.002
7. J. P. Grotzinger, R. E. Milliken, The Sedimentary Record of Mars: A Golden
Decade of Discovery, J. Grotzinger, R. E. Milliken, Eds., Mars Sedimentology
(SEPM Special Publication, 2012), vol. 102.
8. J. P. Grotzinger, Beyond water on Mars. Nat. Geosci. 2, 231–233 (2009).
doi:10.1038/ngeo480
9. A. Fraeman, R. E. Arvidson, J. G. Catalano, J. P. Grotzinger, R. V. Morris, S.
L. Murchie, K. M. Stack, D. C. Humm, J. A. McGovern, F. P. Seelos, K. D.
Seelos, C. E. Viviano, A hematite-bearing layer in Gale Crater: Mapping and
implications for past aqueous conditions. Geology 41, 1103–1106 (2013).
doi:10.1130/G34613.1
10. This decision was made by the entire science team with strong consensus to
drive a relatively short distance (~500 m) to examine rocks with higher
thermal inertia values that also had an apparently strong spatial association
with the AF unit. The prediction based on mapping was that fluvial and/or
lacustrine rocks potentially derived from the crater rim might be encountered.
The strata exposed at the base of Mt. Sharp are still considered to be the
primary mission objective and the team has established a departure date from
Yellowknife Bay of the first week in July 2013.
11. The names used for rock and soil targets studied by Curiosity and reported in
this paper are derived from established rock formations of northern Canada.
These names in turn derive from names of local geographic features where
they occur, per convention, such as mountains, streams, lakes, bays, etc. This
choice of naming scheme celebrates the city of Yellowknife, long known to
be a port of departure for geologic mapping expeditions into some of the
oldest rocks of North America. Yellowknife Crater was designated by the
IAU, and Yellowknife Bay demarcates the area into which Curiosity
descended to study its geologic history.
12. A base map was created based on 25 cm/pixel HiRISE visible image data,
1m/pixel elevation data, and 100 m/pixel THEMIS thermal image data that
was subdivided into 140 1.2×1.2 km (0.025 degrees) quadrangles and mapped
in detail by over 30 team members. The group map was compiled,
consolidated, and iteratively refined into a single GIS project.
13. In addition, minor units of eolian fill/bedforms and ejecta blankets adjacent to
larger craters are present but are not discussed further.
14. Bradbury Landing refers to the patch of ground where Curiosity touched
down on the surface of Mars. It commemorates the noted science fiction
writer Raymond Bradbury, and was designated by NASA.
15. E. M. Stolper, M. B. Baker, M. E. Newcombe, M. E. Schmidt, A. H. Treiman,
A. Cousin, M. D. Dyar, M. R. Fisk, R. Gellert, P. L. King, L. Leshin, S.
Maurice, S. M. McLennan, M. E. Minitti, G. Perrett, S. Rowland, V. Sautter,
R. C. Wiens; MSL Science Team, The petrochemistry of Jake_M: A martian
mugearite. Science 341, 1239463 (2013).doi:10.1126/science.1239463
Medline
16. P.-Y. Meslin, O. Gasnault, O. Forni, S. Schröder, A. Cousin, G. Berger, S. M.
Clegg, J. Lasue, S. Maurice, V. Sautter, S. Le Mouélic, R. C. Wiens, C. Fabre,
W. Goetz, D. Bish, N. Mangold, B. Ehlmann, N. Lanza, A. M. Harri, R.
Anderson, E. Rampe, T. H. McConnochie, P. Pinet, D. Blaney, R. Léveillé, D.
Archer, B. Barraclough, S. Bender, D. Blake, J. G. Blank, N. Bridges, B. C.
Clark, L. DeFlores, D. Delapp, G. Dromart, M. D. Dyar, M. Fisk, B. Gondet,

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 9 / 10.1126/science.1242777
J. Grotzinger, K. Herkenhoff, J. Johnson, J. L. Lacour, Y. Langevin, L.
Leshin, E. Lewin, M. B. Madsen, N. Melikechi, A. Mezzacappa, M. A.
Mischna, J. E. Moores, H. Newsom, A. Ollila, R. Perez, N. Renno, J. B.
Sirven, R. Tokar, M. de la Torre, L. d’Uston, D. Vaniman, A. Yingst; MSL
Science Team, Soil diversity and hydration as observed by ChemCam at Gale
crater, Mars. Science 341, 1238670 (2013).doi:10.1126/science.1238670
Medline
17. R. M. E. Williams, J. P. Grotzinger, W. E. Dietrich, S. Gupta, D. Y. Sumner,
R. C. Wiens, N. Mangold, M. C. Malin, K. S. Edgett, S. Maurice, O. Forni, O.
Gasnault, A. Ollila, H. E. Newsom, G. Dromart, M. C. Palucis, R. A. Yingst,
R. B. Anderson, K. E. Herkenhoff, S. Le Mouélic, W. Goetz, M. B. Madsen,
A. Koefoed, J. K. Jensen, J. C. Bridges, S. P. Schwenzer, K. W. Lewis, K. M.
Stack, D. Rubin, L. C. Kah, J. F. Bell 3rd, J. D. Farmer, R. Sullivan, T. Van
Beek, D. L. Blaney, O. Pariser, R. G. Deen; MSL Science Team, Martian
fluvial conglomerates at Gale crater. Science 340, 1068–1072
(2013).doi:10.1126/science.1237317 Medline
18. The morphology of the “bay” is the result of post-depositional erosion,
perhaps by eolian processes, as shown by the exposures of stratified rock that
record dissection; these are eroded rocks, and not, for example, shoreline
berms. Therefore, the present-day topography does not reflect that at the time
of deposition of those strata.
19. S. M. McLennan, R. B. Anderson, J. F. Bell III, J. C. Bridges, F. Calef III, J.
L. Campbell, B. C. Clark, S. Clegg, P. Conrad, A. Cousin, D. J. Des Marais,
G. Dromart, M. D. Dyar, L. A. Edgar, B. L. Ehlmann, C. Fabre, O. Forni, O.
Gasnault, R. Gellert, S. Gordon, J. A. Grant, J. P. Grotzinger, S. Gupta, K. E.
Herkenhoff, J. A. Hurowitz, P. L. King, S. Le Mouélic, L. A. Leshin, R.
Léveillé, K. W. Lewis, N. Mangold, S. Maurice, D. W. Ming, R. V. Morris,
M. Nachon, H. E. Newsom, A. M. Ollila, G. M. Perrett, M. S. Rice, M. E.
Schmidt, S. P. Schwenzer, K. Stack, E. M. Stolper, D. Y. Sumner, A. H.
Treiman, S. VanBommel, D. T. Vaniman, A. Vasavada, R. C. Wiens, R. A.
Yingst, MSL Science Team, Elemental geochemistry of sedimentary rocks at
Yellowknife Bay, Gale crater, Mars. Science 10.1126/science.1244734
(2013).
20. S. R. Taylor, S. M. McLennan, Planetary Crusts: Their Composition, Origin,
and Evolution (Cambridge Univ. Press, Cambridge, 2009), pp. 378.
21. M. E. Schmidt et al., APXS of first rocks encountered by Curiosity in Gale
Crater: Geochemical diversity and volatile element (K and Zn) enrichment.
44th Lunar and Planetary Science Conference, Abstract 1278. Houston, TX
(2013)
22. N. D. Smith, Some sedimentological aspects of planar cross-stratification in a
sandy braided river. J. Sediment. Petrol. 42, 624–634 (1972).
23. G. A. Macdonald, Pahoehoe, aa, and block lava. Am. J. Sci. 251, 169–191
(1953). doi:10.2475/ajs.251.3.169
24. A. Hurst, A. Scott, M. Vigorito, Physical characteristics of sand injectites.
Earth Sci. Rev. 106, 215–246 (2011). doi:10.1016/j.earscirev.2011.02.004
25. J. A. Ross, J. Peakall, G. M. Keevil, An integrated model of extrusive sand
injectites in cohesionless sediments. Sedimentology 58, 1693–1715 (2011).
doi:10.1111/j.1365-3091.2011.01230.x
26. M. El-Tabakh, R. Riccioni, B. C. Schreiber, Evolution of late Triassic rift
basin evaporites (Passaic Formation): Newark Basin, Eastern North America.
Sedimentology 44, 767–790 (1997). doi:10.1046/j.1365-3091.1997.d01-47.x
27. J. A. Fisher, G. J. Nichols, D. A. Waltham, Unconfined flow deposits in distal
sectors of fluvial distributary systems: Examples from the Miocene Luna and
Huesca Systems, northern Spain. Sediment. Geol. 195, 55–73 (2007).
doi:10.1016/j.sedgeo.2006.07.005
28. D. T. Vaniman, D. L. Bish, D. W. Ming, T. F. Bristow, R. V. Morris, D. F.
Blake, S. J. Chipera, S. M. Morrison, A. H. Treiman, E. B. Rampe, M. Rice,
C. N. Achilles, J. Grotzinger, S. M. McLennan, J. Williams, J. Bell III, H.
Newsom, R. T. Downs, S. Maurice, P. Sarrazin, A. S. Yen, J. M. Morookian,
J. D. Farmer, K. Stack, R. E. Milliken, B. Ehlmann, D. Y. Sumner, G. Berger,
J. A. Crisp, J. A. Hurowitz, R. Anderson, D. DesMarais, E. M. Stolper, K. S.
Edgett, S. Gupta, N. Spanovich, MSL Science Team, Mineralogy of a
mudstone at Yellowknife Bay, Gale crater, Mars. Science
10.1126/science.1243480 (2013).
29. P. E. Potter, J. B. Maynard, P. Depetris, Mud and Mudstones (Springer, 2005).
30. P. B. Attewell, I. W. Farmer, Principles of Engineering Geology (Chapman
and Hall, London and New York, 1976).
31. Supplementary materials are available on Science Online.
32. D. Winston, Fluvial Systems of the Precambrian Belt Supergroup, Montana
and Idaho, U.S.A. Fluvial Sedimentology Memoir 5, 343 (1977).
33. D. S. McCormick, J. P. Grotzinger, Distinction of marine from alluvial Facies
in the Paleoproterozoic (1.9 Ga) burnside formation, Kilohigok basin, N.W.T.,
Canada. J. Sediment. Petrol. 63, 398–419 (1993).
34. A. S. Yen, R. Gellert, C. Schröder, R. V. Morris, J. F. Bell III, A. T. Knudson,
B. C. Clark, D. W. Ming, J. A. Crisp, R. E. Arvidson, D. Blaney, J. Brückner,
P. R. Christensen, D. J. DesMarais, P. A. de Souza Jr., T. E. Economou, A.
Ghosh, B. C. Hahn, K. E. Herkenhoff, L. A. Haskin, J. A. Hurowitz, B. L.
Joliff, J. R. Johnson, G. Klingelhöfer, M. B. Madsen, S. M. McLennan, H. Y.
McSween, L. Richter, R. Rieder, D. Rodionov, L. Soderblom, S. W. Squyres,
N. J. Tosca, A. Wang, M. Wyatt, J. Zipfel, An integrated view of the
chemistry and mineralogy of martian soils. Nature 436, 49–54 (2005).
Medline doi:10.1038/nature03637
35. P. R. Christensen, Regional dust deposits on Mars: Physical properties, age,
and history. J. Geophys. Res. Solid Earth 91, 3533–3545 (1986).
doi:10.1029/JB091iB03p03533
36. N. T. Bridges, D. R. Muhs, Duststones on Mars: source, transport, deposition,
and erosion. Sedimentary Geology of Mars (SEPM Special Publication) 102,
pp. 169–182 (2012).
37. N. Mangold, V. Ansan, P. Masson, C. Vincendon, Estimate of aeolian dust
thickness in Arabia Terra, Mars: Implications of a thick mantle (>20 m) for
hydrogen detection. Geomorphology: relief, processes, environment, pp. 23–
32 (2009).
38. P. M. Sadler, Sediment accumulation rates and the completeness of
stratigraphic sections. J. Geol. 89, 569–584 (1981). doi:10.1086/628623
39. A. M. Sarna-Wojcicki, S. Shipley, R. B. Waitt, D. Dzurisin, S. H. Wood, in
The 1980 eruptions of Mount St. Helens, Washington, P. W. Lipman, D. R.
Mullineaux, Eds. (U.S. Geological Survey Professional Paper, 1981), vol.
1250, pp. 577–600.
40. S. M. McLennan, J. F. Bell III, W. M. Calvin, P. R. Christensen, B. C. Clark,
P. A. de Souza, J. Farmer, W. H. Farrand, D. A. Fike, R. Gellert, A. Ghosh, T.
D. Glotch, J. P. Grotzinger, B. Hahn, K. E. Herkenhoff, J. A. Hurowitz, J. R.
Johnson, S. S. Johnson, B. Jolliff, G. Klingelhöfer, A. H. Knoll, Z. Learner,
M. C. Malin, H. Y. McSween Jr., J. Pocock, S. W. Ruff, L. A. Soderblom, S.
W. Squyres, N. J. Tosca, W. A. Watters, M. B. Wyatt, A. Yen, Provenance
and diagenesis of the evaporite-bearing Burns formation, Meridiani Planum,
Mars. Earth Planet. Sci. Lett. 240, 95–121 (2005).
doi:10.1016/j.epsl.2005.09.041
41. P. Fralick, J. P. Grotzinger, L. Edgar, in Sedimentary Geology of Mars, J. P.
Grotzinger, R. E. Milliken, Eds. (SEPM Special Publication, 2012), vol. 102.
42. J. D. Kim, N. Yee, V. Nanda, P. G. Falkowski, Anoxic photochemical
oxidation of siderite generates molecular hydrogen and iron oxides. Proc.
Natl. Acad. Sci. U.S.A. 110, 10073–10077 (2013). Medline
doi:10.1073/pnas.1308958110
43. G. Furniss, J. F. Rittel, D. Winston, Gas bubble and expansion crack origin of
“molar-tooth” calcite structures in the Middle Porterozoic Belt Supergroup,
western Montana. J. Sediment. Res. 68, 104–114 (1998).
doi:10.2110/jsr.68.104
44. The term “raised ridges” may seem redundant, but the designation “raised” is
meant to denote the significant height of the ridges compared to their width.
45. P. S. Plummer, V. A. Gostin, Shrinkage cracks: Desiccation or synaeresis? J.
Sediment. Res. 51, 1147–1156 (1981).
46. B. R. Pratt, Syneresis cracks: Subaqueous shrinkage in argillaceous sediments
caused by earthquake-induced dewatering. Sediment. Geol. 117, 1–10 (1998).
doi:10.1016/S0037-0738(98)00023-2
47. M. D. Pollock, L. C. Kah, J. K. Bartley, Morphology of molar-tooth structures
in Precambrian carbonates: Influence of substrate rheology and implications
for genesis. J. Sediment. Res. 76, 310–323 (2006). doi:10.2110/jsr.2006.021
48. A. Hurst, J. A. Cartwright, D. Duranti, in Subsurface Sediment Mobilisation,
R. R. H. P. Van Rensbergen, A. J. Maltman, C. K. Morley, Ed. (Geological
Society of London Special Publication, 2003), vol. 216, pp. 123–137.
49. I. A. Kane, Development and flow structures of sand injectities: The Hind
Sandstone Member injectite complex, Carboniferous, UK. Mar. Pet. Geol. 27,
1200–1215 (2010). doi:10.1016/j.marpetgeo.2010.02.009
50. M. Huuse, J. Cartwright, A. Hurst, N. Steinsland, Seismic Characterization of
Large-Scale Sandstone Intrusions, A. H. A. J. Cartwright, Ed., Sand
injectities: Implications for hydrocarbon exploration and production (AAPG
Memoir, 2007), vol. 87.
51. J. W. Cosgrove, Hydraulic fracturing during the formation and deformation of

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 10 / 10.1126/science.1242777
a basin: A factor in the dewatering of low-permeability sediments. AAPG
Bull. 85, 737–748 (2001).
52. D. W. Ming, P. D. Archer Jr., D. P. Glavin, J. L. Eigenbrode, H. B. Franz, B.
Sutter, A. E. Brunner, J. C. Stern, C. Freissinet, A. C. McAdam, P. R.
Mahaffy, M. Cabane, P. Coll, J. L. Campbell, S. K. Atreya, P. B. Niles, J. F.
Bell III, D. L. Bish, W. B. Brinckerhoff, A. Buch, P. G. Conrad, D. J. Des
Marais, B. L. Ehlmann, A. G. Fairén, K. Farley, G. J. Flesch, P. Francois, R.
Gellert, J. A. Grant, J. P. Grotzinger, S. Gupta, K. E. Herkenhoff, J. A.
Hurowitz, L. A. Leshin, K. W. Lewis, S. M. McLennan, K. E. Miller, J.
Moersch, R. V. Morris, R. Navarro-González, A. A. Pavlov, G. M. Perrett, I.
Pradler, S. W. Squyres, R. E. Summons, A. Steele, E. M. Stolper, D. Y.
Sumner, C. Szopa, S. Teinturier, M. G. Trainer, A. H. Treiman, D. T.
Vaniman, A. R. Vasavada, C. R. Webster, J. J. Wray, R. A. Yingst, MSL
Science Team, Volatile and organic compositions of sedimentary rocks in
Yellowknife Bay, Gale crater, Mars. Science 10.1126/science.1245267
(2013).
53. J. D. Collinson, Sedimentology of unconformities within a fluvio-lacustrine
sequence; Middle Proterozoic of Eastern North Greenland. Sediment. Geol.
34, 145–166 (1983). doi:10.1016/0037-0738(83)90084-2
54. L. B. Aspler, J. R. Chiarenzelli, B. L. Cousens, Fluvial, lacustrine and
volcanic sedimentation in the Angikuni sub-basin, and initiation of ∼1.84–
1.79 Ga Baker Lake Basin, western Churchill Province, Nunavut, Canada.
Precambrian Res. 129, 225–250 (2004). doi:10.1016/j.precamres.2003.10.004
55. H. H. Kieffer, B. M. Jakosky, C. Snyder, M. Matthews, Mars, H. H. Kieffer,
B. M. Jakosky, C. Snyder, M. Matthews, Eds. (Univ. of Arizona Press,
Tucson, 1992).
56. J. F. Bell III, The Martian Surface: Composition, Mineralogy, and Physical
Properties, J. Bell, Ed. (Cambridge University Press, New York, 2008).
57. J. C. Andrews-Hanna, K. W. Lewis, Early Mars hydrology: 2. Hydrological
evolution in the Noachian and Hesperian epochs. J. Geophys. Res. Planets
116, E02007 (2011). doi:10.1029/2010JE003709
58. C. R. Woese, G. E. Fox, Phylogenetic structure of the prokaryotic domain:
The primary kingdoms. Proc. Natl. Acad. Sci. U.S.A. 74, 5088–5090 (1977).
Medline doi:10.1073/pnas.74.11.5088
59. E. I. Friedmann, Endolithic microorganisms in the antarctic cold desert.
Science 215, 1045–1053 (1982).doi:10.1126/science.215.4536.1045 Medline
60. K. O. Stetter, Extremophiles and their adaptation to hot environments. FEBS
Lett. 452, 22–25 (1999). Medline doi:10.1016/S0014-5793(99)00663-8
61. M. Rossi, M. Ciaramella, R. Cannio, F. M. Pisani, M. Moracci, S. Bartolucci,
Extremophiles 2002. J. Bacteriol. 185, 3683–3689 (2003). Medline
doi:10.1128/JB.185.13.3683-3689.2003
62. K. H. Nealson, Sediment bacteria: Who’s there, what are they doing, and
what’s new? Annu. Rev. Earth Planet. Sci. 25, 403–434 (1997). Medline
doi:10.1146/annurev.earth.25.1.403
63. H. G. Schlegel, General Microbiology (Cambridge Univ. Press, ed. 7, 1993).
64. G. Gottschalk, Microbial Metabolism (Springer, New York, 1994).
65. R. J. Parkes, G. Webster, B. A. Cragg, A. J. Weightman, C. J. Newberry, T.
G. Ferdelman, J. Kallmeyer, B. B. Jørgensen, I. W. Aiello, J. C. Fry, Deep
sub-seafloor prokaryotes stimulated at interfaces over geological time. Nature
436, 390–394 (2005). Medline doi:10.1038/nature03796
66. K. H. Nealson, P. G. Conrad, Life: past, present and future. Philos. Trans. R.
Soc. London Ser. B 354, 1923–1939 (1999). Medline
67. D. Z. Sousa, A. F. Salvador, J. Ramos, A. P. Guedes, S. Barbosa, A. J. Stams,
M. M. Alves, M. A. Pereira, Activity and viability of methanogens in
anaerobic digestion of unsaturated and saturated long-chain fatty acids. Appl.
Environ. Microbiol. 79, 4239–4245 (2013). Medline
doi:10.1128/AEM.00035-13
68. M. S. Milman-Barris, J. R. Beckett, M. B. Baker, A. E. Hofmann, Z. Morgan,
M. R. Crowley, D. Vielzeuf, E. Stolper, Zoning of phosphorous in igneous
olivine. Contrib. Mineral. Petrol. 155, 739–765 (2008). doi:10.1007/s00410-
007-0268-7
69. M. A. Schoonen, Y. Xu, Nitrogen reduction under hydrothermal vent
conditions: Implications for the prebiotic synthesis of C-H-O-N compounds.
Astrobiology 1 1 (2), pp. 133–142 (2001).
70. D. P. Summers, R. C. B. Basa, B. Khare, D. Rodoni, Abiotic nitrogen fixation
on terrestrial planets: Reduction of NO to ammonia by FeS. Astrobiology 12,
107–114 (2012). Medline doi:10.1089/ast.2011.0646
71. V. I. Oyama, B. J. Berdahl, G. C. Carle, Preliminary findings of the Viking
gas exchange experiment and a model for martian surface chemistry. Nature
265, 110–114 (1977). doi:10.1038/265110a0
72. H. P. Klein, The Viking Biological Investigation, General aspects. J. Geophys.
Res. 82, 4677–4680 (1977). doi:10.1029/JS082i028p04677
73. M. H. Hecht, S. P. Kounaves, R. C. Quinn, S. J. West, S. M. Young, D. W.
Ming, D. C. Catling, B. C. Clark, W. V. Boynton, J. Hoffman, L. P. Deflores,
K. Gospodinova, J. Kapit, P. H. Smith, Detection of perchlorate and the
soluble chemistry of martian soil at the Phoenix lander site. Science 325, 64–
67 (2009). Medline
74. S. W. Squyres, A. H. Knoll, Sedimentary rocks and Meridiani Planum:
Origin, diagenesis, and implications for life of Mars. Earth Planet. Sci. Lett.
240, 1–10 (2005). doi:10.1016/j.epsl.2005.09.038
75. L. A. Leshin, P. R. Mahaffy, C. R. Webster, M. Cabane, P. Coll, P. G.
Conrad, P. D. Archer Jr., S. K. Atreya, A. E. Brunner, A. Buch, J. L.
Eigenbrode, G. J. Flesch, H. B. Franz, C. Freissinet, D. P. Glavin, A. C.
McAdam, K. E. Miller, D. W. Ming, R. V. Morris, R. Navarro-González, P.
B. Niles, T. Owen, R. O. Pepin, S. Squyres, A. Steele, J. C. Stern, R. E.
Summons, D. Y. Sumner, B. Sutter, C. Szopa, S. Teinturier, M. G. Trainer, J.
J. Wray, J. P. Grotzinger; MSL Science Team, Volatile, isotope, and organic
analysis of martian fines with the Mars Curiosity rover. Science 341, 1238937
(2013).doi:10.1126/science.1238937 Medline
76. R. E. Milliken, G. A. Swayze, R. E. Arvidson, J. L. Bishop, R. N. Clark, B. L.
Ehlmann, R. O. Green, J. P. Grotzinger, R. V. Morris, S. L. Murchie, J. F.
Mustard, C. Weitz, Opaline silica in young deposits on Mars. Geology 36,
847–850 (2008). doi:10.1130/G24967A.1
77. R. V. Morris, G. Klingelhöfer, C. Schröder, D. S. Rodionov, A. Yen, D. W.
Ming, P. A. de Souza Jr., I. Fleischer, T. Wdowiak, R. Gellert, B. Bernhardt,
E. N. Evlanov, B. Zubkov, J. Foh, U. Bonnes, E. Kankeleit, P. Gütlich, F.
Renz, S. W. Squyres, R. E. Arvidson, Mössbauer mineralogy of rock, soil,
and dust at Gusev crater, Mars: Spirit’s journey through weakly altered
olivine basalt on the plains and pervasively altered basalt in the Columbia
Hills. J. Geophys. Res. Planets 111, E02S13 (2006).
doi:10.1029/2005JE002584
78. R. V. Morris et al., Mossbauer mineralogy of rock, soil, and dust at Meridiani
Planum, Mars: Opportunity's journey across sulfate-rich outcrop, basaltic sand
and dust, and hematite lag deposits. J. Geophys. Res. 111, E12S15 (2006).
79. J. F. Bell 3rd, S. W. Squyres, R. E. Arvidson, H. M. Arneson, D. Bass, W.
Calvin, W. H. Farrand, W. Goetz, M. Golombek, R. Greeley, J. Grotzinger, E.
Guinness, A. G. Hayes, M. Y. Hubbard, K. E. Herkenhoff, M. J. Johnson, J.
R. Johnson, J. Joseph, K. M. Kinch, M. T. Lemmon, R. Li, M. B. Madsen, J.
N. Maki, M. Malin, E. McCartney, S. McLennan, H. Y. McSween Jr., D. W.
Ming, R. V. Morris, E. Z. Dobrea, T. J. Parker, J. Proton, J. W. Rice Jr., F.
Seelos, J. M. Soderblom, L. A. Soderblom, J. N. Sohl-Dickstein, R. J.
Sullivan, C. M. Weitz, M. J. Wolff, Pancam multispectral imaging results
from the Opportunity Rover at Meridiani Planum. Science 306, 1703–1709
(2004).doi:10.1126/science.1105245 Medline
80. R. M. Cornell, U. Schwertmann, The Iron Oxides: Structure, Properties,
Reactions, Occurrence and Uses (W. Wiley-VCH Verlag GmbH & Co, ed. 2,
2003), pp. 664.
81. G. N. Schrauzer, T. D. Guth, Hydrogen evolving systems. 1. The formation of
molecular hydrogen from aqueous suspensions of iron(II) hydroxide and
reactions with reducible substrates, including molecular nitrogen. J. Am.
Chem. Soc. 98, 3508–3513 (1976). doi:10.1021/ja00428a019
82. W. D. Grant, Life at low water activity. Philos. Trans. R. Soc. London Ser. B
359, 1249–1267 (2004). Medline doi:10.1098/rstb.2004.1502
83. A. H. Knoll, J. Grotzinger, Water on Mars and the prospect of martian life.
Elements 2, 169–173 (2006). doi:10.2113/gselements.2.3.169
84. J. P. Williams, J. E. Hallsworth, Limits of life in hostile environments: No
barriers to biosphere function? Environ. Microbiol. 11, 3292–3308 (2009).
Medline doi:10.1111/j.1462-2920.2009.02079.x
85. N. J. Tosca, A. H. Knoll, S. M. McLennan, Water activity and the challenge
for life on early Mars. Science 320, 1204–1207
(2008).doi:10.1126/science.1155432 Medline
86. S. Fendrihan, M. Dornmayr-Pfaffenhuemer, F. W. Gerbl, A. Holzinger, M.
Grösbacher, P. Briza, A. Erler, C. Gruber, K. Plätzer, H. Stan-Lotter,
Spherical particles of halophilic archaea correlate with exposure to low water
activity—implications for microbial survival in fluid inclusions of ancient
halite. Geobiology 10, 424–433 (2012). Medline doi:10.1111/j.1472-
4669.2012.00337.x
87. C. Demergasso, E. O. Casamayor, G. Chong, P. Galleguillos, L. Escudero, C.

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 11 / 10.1126/science.1242777
Pedrós-Alió, Distribution of prokaryotic genetic diversity in athalassohaline
lakes of the Atacama Desert, Northern Chile. FEMS Microbiol. Ecol. 48, 57–
69 (2004). Medline doi:10.1016/j.femsec.2003.12.013
88. A. Kish, G. Kirkali, C. Robinson, R. Rosenblatt, P. Jaruga, M. Dizdaroglu, J.
DiRuggiero, Salt shield: Intracellular salts provide cellular protection against
ionizing radiation in the halophilic archaeon, Halobacterium salinarum NRC-
1. Environ. Microbiol. 11, 1066–1078 (2009). Medline doi:10.1111/j.1462-
2920.2008.01828.x
89. L. R. Dartnell, L. Desorgher, J. M. Ward, A. J. Coates, Modelling the surface
and subsurface martian radiation environment: Implications for astrobiology.
Geophys. Res. Lett. 34, L02207 (2007). doi:10.1029/2006GL027494
90. A. I. López-Archilla, I. Marin, R. Amils, Microbial community composition
and ecology of an acidic aquatic environment: The Tinto River, Spain.
Microb. Ecol. 41, 20–35 (2001). Medline
91. J.-P. Bibring, Y. Langevin, J. F. Mustard, F. Poulet, R. Arvidson, A. Gendrin,
B. Gondet, N. Mangold, P. Pinet, F. Forget, M. Berthé, J. P. Bibring, A.
Gendrin, C. Gomez, B. Gondet, D. Jouglet, F. Poulet, A. Soufflot, M.
Vincendon, M. Combes, P. Drossart, T. Encrenaz, T. Fouchet, R. Merchiorri,
G. Belluci, F. Altieri, V. Formisano, F. Capaccioni, P. Cerroni, A. Coradini,
S. Fonti, O. Korablev, V. Kottsov, N. Ignatiev, V. Moroz, D. Titov, L.
Zasova, D. Loiseau, N. Mangold, P. Pinet, S. Douté, B. Schmitt, C. Sotin, E.
Hauber, H. Hoffmann, R. Jaumann, U. Keller, R. Arvidson, J. F. Mustard, T.
Duxbury, F. Forget, G. Neukum, Global mineralogical and aqueous mars
history derived from OMEGA/Mars Express data. Science 312, 400–404
(2006).doi:10.1126/science.1122659 Medline
92. T. F. Bristow, R. E. Milliken, Terrestrial perspective on authigenic clay
mineral production in ancient martian lakes. Clays Clay Miner. 59, 339–358
(2011). doi:10.1346/CCMN.2011.0590401
93. S. L. Murchie, J. F. Mustard, B. L. Ehlmann, R. E. Milliken, J. L. Bishop, N.
K. McKeown, E. Z. Noe Dobrea, F. P. Seelos, D. L. Buczkowski, S. M.
Wiseman, R. E. Arvidson, J. J. Wray, G. Swayze, R. N. Clark, D. J. Des
Marais, A. S. McEwen, J.-P. Bibring, A synthesis of martian aqueous
mineralogy after 1 Mars year of observations from the Mars Reconnaissance
Orbiter. J. Geophys. Res. Planets 114, E00D06 (2009).
doi:10.1029/2009JE003342
94. A. G. Fairén, V. Chevrier, O. Abramov, G. A. Marzo, P. Gavin, A. F. Davila,
L. L. Tornabene, J. L. Bishop, T. L. Roush, C. Gross, T. Kneissl, E. R. Uceda,
J. M. Dohm, D. Schulze-Makuch, J. A. Rodríguez, R. Amils, C. P. McKay,
Noachian and more recent phyllosilicates in impact craters on Mars. Proc.
Natl. Acad. Sci. U.S.A. 107, 12095–12100 (2010). Medline
doi:10.1073/pnas.1002889107
95. H. L. James, A. F. Trendall, Banded Iron Formation: Distribution in Time
and Paleoenvironmental Significance, H. D. H. A. M. Schidlowski, Ed.,
Mineral Deposits and the Evolution of the Biosphere: Dahlem Workshop
Report (Springer-Verlag, Berlin, Heidelberg, New York, 1982), vol. 3.
96. A. Bekker, J. F. Slack, N. Planavsky, B. Krapez, A. Hofmann, K. O.
Konhauser, O. J. Rouxel, Iron formation: The sedimentary product of a
complex interplay among mantle, tectonic, oceanic, and biospheric processes.
Econ. Geol. 105, 467–508 (2010). doi:10.2113/gsecongeo.105.3.467
97. J. P. Grotzinger, in Controls on Carbonate Platforms and Basin Development,
P. D. Crevello, J. L. Wilson, J. F. Sarg, J. F. Read, Eds. (SEPM Special
Publication, 1989), vol. 44, pp. 79–106.
98. J. P. Grotzinger, N. P. James, in Carbonate Sedimentation and Diagenesis in
the Evolving Precambrian World, J. P. Grotzinger, N. P. James, Eds. (SEPM
Special Publication, 2000), vol. 67, pp. 3–20.
99. K. W. Lewis, O. Aharonson, J. P. Grotzinger, R. L. Kirk, A. S. McEwen, T.
A. Suer, Quasi-periodic bedding in the sedimentary rock record of Mars.
Science 322, 1532–1535 (2008).doi:10.1126/science.1161870 Medline
100. R. C. Anderson, L. Jandura, A. B. Okon, D. Sunshine, C. Roumeliotis, L. W.
Beegle, J. Hurowitz, B. Kennedy, D. Limonadi, S. McCloskey, M. Robinson,
C. Seybold, K. Brown, Collecting samples in Gale crater, Mars; an Overview
of the Mars Science Laboratory sample acquisition, sample processing and
handling system. Space Sci. Rev. 170, 57–75 (2012). doi:10.1007/s11214-012-
9898-9
Acknowledgments: The authors are indebted to the Mars Science Laboratory
Project engineering and management teams, for their exceptionally skilled and
diligent efforts in making the mission as effective as possible and enhancing
science operations. We are also grateful to all those MSL team members who
participated in tactical and strategic operations. Without the support of both
the engineering and science teams, the data presented here could not have
been collected. Some of this research was carried out at the Jet Propulsion
Laboratory, California Institute of Technology, under a contract with the
National Aeronautics and Space Administration. Data presented in this paper
are archived in the Planetary Data System (pds.nasa.gov).
Supplementary Materials
www.sciencemag.org/cgi/content/full/science.1242777/DC1
Supplementary Text
Figs. S1 to S4
Tables S1 and S2
References (99, 100)
MSL Science Team Author List
4 July 2013; accepted 6 November 2013
Published online 9 December 2013
10.1126/science.1242777

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 12 / 10.1126/science.1242777
Fig. 1. Regional context maps. (A) Location of Bradbury landing site and Yellowknife Bay in relationship to the topography and
thermal inertia of the broad valley between Gale’s crater rim and Mt. Sharp. White ellipse is the landing ellipse. White line
represents intended drive route from Yellowknife Bay to Mt. Sharp entry point at Murray Buttes. (B) A geological map was
constructed based largely on HiRISE image data and used to demarcate major terrain types for exploration by Curiosity. The MSL
science team chose to drive the rover to Yellowknife Bay where three terrains intersect in a triple junction. One of these terrains
(BF) very closely coincides with higher values of thermal inertia, and it was also recognized that rocks at Yellowknife Bay are
downslope of those forming the AF unit, suggesting a genetic link. The legend for symbols in Fig. 1A applies to Fig. 1B. Black
ellipse is the landing ellipse. White line represents intended drive route from Yellowknife Bay to Mt. Sharp entry point.

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 13 / 10.1126/science.1242777
Fig. 2. Local context maps. (A) HiRISE image (PSP_010573_1755)of Bradbury Landing showing Curiosity’s position after
landing and path of eventual traverse to Yellowknife Bay, where the John Klein and Cumberland holes were drilled. Area of
image is approximated by circle and square symbols in Fig. 1B. Yellowknife Bay derives its name from Yellowknife crater,
which is located within the broad expanse of the BF map unit. The BF unit likely represents the Yellowknife Bay formation at
more regional scales. Cross-section A-A’ shows topography from Bradbury Landing to Yellowknife Bay. (B) Inset shows
detailed geological map of southwest part of Yellowknife Bay. Three maps units (HP, CS, BF) intersect just south of the Shaler
outcrop. The BF map unit is subdivided into three members (see text). Key outcrops are shown that provided information
leading to the development of a stratigraphy shown in Fig. 4. Note that the contact between Sheepbed member and Gillespie
Lake member erodes to form a topographic step that is visible from orbit and can be traced for hundreds of meters around
Yellowknife Bay. Therefore, it seems likely that much of the Yellowknife “Bay” topographic depression was created by eolian
erosion of the Sheepbed mudstone member (see text). See Fig. 4 for mapped stratigraphic units. Locations of Rocknest (scoop
location, and rocky outcrops), and John Klein and Cumberland (drill) sampling locations are shown.

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 14 / 10.1126/science.1242777
Fig. 3. Mastcam mosaic of Yellowknife Bay formation. View from base of exposed section up through Sheepbed, Gillespie
Lake, and basal Glenelg members. Location of drill holes and APXS measurements is shown. High density of APXS
measurements between Snake River and Ungava targets delineates the route of the Selwyn reference section. Note the
“snake” feature cutting up through the section and terminating in small anticline. White dots represent combined APXS, MAHLI,
and ChemCam measurements; Gray dots, ChemCam or MAHLI only. Both scale bars are 50 cm long with 10 cm spaced white
and black sections. The lower scale bar is about 8 m away from Curiosity, the upper scale bar is about 30 m away. The 111-
image mosaic was acquired on Sol 137, by M-34 sequence 818. This figure shows only a small portion of the full mosaic. The
foothills of Mt. Sharp are visible in the distance, upper left, southwest of camera position. For mosaic image IDs see (31).

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 15 / 10.1126/science.1242777
Fig. 4. Stratigraphy of the Yellowknife Bay formation plotted with elemental and oxide ratios measured by the
Curiosity APXS instrument. The Yellowknife Bay section was split into three members distinguished by lithological properties
(facies, textures), chemical composition, and attributes observed from orbit by HiRISE. The stratigraphic column highlights
differences in grain size between the Yellowknife Bay members and the presence of stratification styles, primary textures, and
diagenetic textures including nodules, hollow nodules, raised ridges, sulfate-filled fractures, and vugs. APXS analyses are
plotted as ratios to highlight compositional trends throughout the Yellowknife Bay formation. Average Mars crustal composition
for each ratio (colored vertical lines) (20) is plotted for comparison to Curiosity APXS measurements.

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 16 / 10.1126/science.1242777
Fig. 5. Sedimentary rocks of the Yellowknife Bay formation. (A) Shaler outcrop shows a variety of facies including compound
cross-bedding. The image was white balanced and acquired by Mastcam-100 on sol 120. Image ID is
0120MR0007520130200690E01_DXXX. (B) Rocknest-3 rock, which represents the middle part of the Glenelg member, is fine-
grained with planar lamination, shrinkage cracks, and mm-scale voids (well-developed in lower third of rock). Subset of a mosaic of
images that were white-balanced and acquired with Mastcam-100 on sol 59. Image IDs, as part of SEQID mcam00270 are
0059MR0002700000103141E01_DXXX, 0059MR0002700010103142E01_DXXX, 0059MR0002700020103143E02_DXXX,
0059MR0002700030103144E01_DXXX. (C) Vuggy, medium-grained texture in Point Lake outcrop (“Measles Point” target), middle
of Point Lake member. Note thin fractures filled with light toned material, interpreted as sulfate. ChemCam data show that white
blebs, such as the one in the center, are composed of calcium sulfate. This focus merge product was acquired by MAHLI on sol
303, ID 0303MH0002900000103786R00. (D) Medium to coarse-grained sandstone at the Gillespie Lake outcrop (see Fig. 2B),
basal bed of Gillespie Lake member. This bed is composed of poorly sorted, moderately well rounded, dark to light grains, some of
which have glassy luster (lower left arrow). A small amount of vuggy porosity is evident (upper right arrow) but otherwise the rock
appears well cemented. The image was acquired by MAHLI on sol 132, ID 0132MH0001580010101221E01. (E) Mudstone in
Sheepbed member, “Wernecke target” (see Fig. 3). Rock has been brushed revealing homogeneous, fine-grained texture. Outlines
of nodules (black arrow), void spaces (gray arrow), and sulfate-filled voids can be seen and only those voids connected by hairline
fractures (white arrow) have been filled with sulfates. Note scoring of surface by brush bristles indicating softness of mudstone. The
image was acquired by MAHLI on sol 169, ID 0169MH0002080020102218C00. (F) John Klein drill hole (see Fig. 3) reveals gray
colored cuttings, rock powder and interior wall. Note homogeneous, fine grain size of mudstone, and irregular network of sulfate-
filled hairline fractures. Array of eight ChamCam shot points can be seen. Diameter of hole is 1.6 cm. The image was acquired by
MAHLI on sol 270, ID 0270MH0002540050102794C00.

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 17 / 10.1126/science.1242777
Fig. 6. Diagenetic features of the Sheepbed member. (A) Sheepbed target shows that millimeter-scale nodules, interpreted
as concretions, are locally abundant. Note their dispersed distribution. Outcrop is crosscut by sulfate-filled fractures. Subset of
a mosaic acquired by Mastcam34 on sol 192. Image IDs are 0192ML0010170240105705E01_DXXX, and
0192ML0010170070105688E01_DXXX. The image has been white balanced. (B) Hollow nodules at the “Bonnett Plume” target
(see Fig. 3) are defined by circular cross-sections through voids with raised rims (white arrow). Voids are filled with sulfate
minerals where intersected by hairline fractures (black arrow) but are otherwise unfilled. The image was white balanced and
acquired by Mastcam-100 on sol 159. Image ID is 0159MR0008640050201360E01_DXXX. (C) Raised ridges near the
McGrath target have spindle-shaped terminations (see Fig. 3). Note broadly varying strikes and with dips ranging from vertical
to 45 degrees. Ridges most commonly have parallel sides, but also have one or two additional infilling bands. All contour the
local topography of the fracture margin and are interpreted as infilling cements. The image was white balanced and acquired by
Mastcam-100 on sol 164. Image ID is 0164MR0008850000201589E01_DXXX. (D) Sulfate-filled fractures at Sheepbed target
(see Fig. 3) are consistent with brittle deformation of lithified mudstone, followed by precipitation of sulfate from mineralizing
fluids. Also note abundant mm-scale nodules. The fracture fills mostly are flush with the bedrock surface, which contrasts with
the nodules that weather in relief. Image is a ChemCam RMI mosaic that has been pan-sharpened using Mastcam-100 color
data that has been white balanced. Images used in this composite are: CR0_408676341EDR_F0051398CCAM01126M1,
CR0_408675268EDR_F0051398CCAM01126M1, and Mastcam-100 ID 0126MR0007800000200786E01_DXXX.

/ http://www.sciencemag.org/content/early/recent / 13 December 2013 / Page 18 / 10.1126/science.1242777
Fig. 7. Map of diagenetic features showing spatial
relationships between fabric elements. The rock surface
coincides with a bedding plane. Note that nodules and hollow
nodules pass laterally into raised ridges suggesting variations
in lithologic or diagenetic fluid properties (see text). (A) Subset
of the Mastcam-100 workspace mosaic acquired by the
Curiosity on Sol 164. This perspective mosaic is white-
balanced and was used as a base map. (B) The Sol 164
workspace mosaic annotated to show the distribution of early
diagenetic features (nodules, hollow nodules, raised ridges)
and later diagenetic features (thick to thin sulfate-filled
fractures). Erosion-resistant raised ridges were outlined
individually and generally exhibit parallel sets of isopachous
linings. Thin (<5 mm in width) sulfate veins have relatively
constant thickness whereas thicker sulfate veins have more
variable thickness. Both sets of veins crosscut other diagenetic
features. Hollow nodules are circular features (~1 mm in
diameter) that stand out in raised relief from the outcrop
surface and are distinguished from nodules by the presence of
a small depression in the center of the feature. Because hollow
nodule diameters often are at or below the resolution limits of
this mosaic (confirmed by MAHLI observations), hollow nodules
are likely underrepresented relative to nodules. Subset of the
Mastcam-100 workspace mosaic from sol 164. For mosaic
image IDs see (31).