Jordana Georgin

Universidade Federal de Santa Maria · engenharia ambiental

Emerging pollutants are a widespread environmental concern, andadsorption represents one of the choices available for the removal of suchcompounds from polluted waters. However, the set‐up of a new adsorption system requiresthe experimental determination of adsorption isotherms and their thoroughmodelling, for the sake of a convenient optimization....

Paracetamol, a common pain reliever, has seen a significant rise in use, particularly during the Coronavirus Disease 2019 (COVID-19) pandemic. This widespread consumption has led to increased levels of paracetamol in the environment through wastewater discharge. This raises concerns about its potential impact on aquatic ecosystems. Here, we review...

In addressing the environmental impact of açaí pulp production waste, this study explores the sustainable transformation of Euterpe oleracea fruit pits into activated carbon using a zinc chloride (ZnCl2) activation process. The primary aim is to repurpose this agricultural by-product for the efficient removal of atrazine (ATZ) and 2,4-dichloropheno...

Fluoride contamination in water sources poses a significant challenge to human health and the environment. In recent years, adsorption technology has emerged as a promising approach for water defluoridation due to its efficiency and cost-effectiveness. This review article comprehensively explores the advances in water defluoridation through adsorpt...

This study investigates the use of watermelon seeds (Citrullus lanatus), a plentiful and cost-effective biosorbent, for the removal of basic fuchsin (BF) and crystal violet (CV) dyes from aqueous solutions. Characterization of the biosorbent was conducted using Fourier Transform Infrared Spectroscopy (FT-IR), X-Ray Diffraction (XRD), and Scanning E...

Green roofs are promising tools in sustainable urban planning, offering benefits such as stormwater management, energy savings, aesthetic appeal, and recreational spaces. They play a crucial role in creating sustainable and resilient cities, providing both environmental and economic advantages. Despite these benefits, concerns persist about their i...

Even at low concentrations, steroid hormones pose a significant threat to ecosystem health and are classified as micropollutants. Among these, 17β-estradiol (molecular formula: C18H24O2; pKa = 10.46; Log Kow = 4.01; solubility in water = 3.90 mg L⁻¹ at 27 °C; molecular weight: 272.4 g mol⁻¹) is extensively studied as an endocrine disruptor due to i...

The discharge of dyes and antibiotics (ATBs) into the water streams causes severe water and soil pollution, which poses a global threat to aquatic ecosystems and humans. Clay-based nanomaterials (C@NMs) exhibited great potency as adsorbents to sustainably eradicate dyes and ATBs from water bodies and waste sites due to their large surface area, tun...

A agroecologia tem ganhado cada vez mais reconhecimento científico e político como tendo potencial para abordar questões ambientais e sociais na produção de alimentos, mas foram levantadas preocupações sobre suas implicações para a segurança alimentar e nutricional, particularmente em países de baixa renda. Esse artigo de revisão de literatura exam...

The production of cobalt oxide nanoparticles and their use in the adsorption of methylene blue (MB) from solution is described in the paper. The X-ray diffraction patterns show that the synthesized cobalt oxide nanoparticles have a crystalline cubic structure. The study of the adsorption of methylene blue onto the cobalt oxide nanoparticles involve...

Introduction: When using conventional methods to remove contaminants present in water, it generates limitations, such as low efficiency values, and the need for a large operating area added to a high operational cost. As a result, the scientific community has focused its efforts on improving existing removal methods, such as adsorption more focused...

The potential of pyrolyzed Mytella falcata shells as an adsorbent for removing methylene blue dye molecules from aqueous solutions was investigated. The study found that the adsorbent produced at 600 °C of pyrolysis temperature, with an adsorbent mass of 0.5 g, particle diameter of 0.297–0.149 mm, and pH 12.0, demonstrated the highest dye molecule...

Due to its high efficiency in treating some common diseases, the medical community has frequently recommended the use of amoxicillin antibiotic. Once present in the human body, most of it is not metabolized and is released in the urine. As a result, treatment plants that do not have 100% removal have released the antibiotic into the environment, d...

In this study, a layered MgFe/double hydroxide (MgFe/LDH) adsorbent for nitrate removal from simulated systems was developed and investigated. Three different synthesis methods were used: coprecipitation at con�stant pH (CC), conventional hydrothermal (CH), and pre-ultrasonic followed by conventional hydrothermal (UCH). The XRD results indicated...

Emerging contaminants were used during the COVID-19 pandemic, including ivermectin. Studies that limit the optimal adsorption parameters of ivermectin are scarce in the literature. In this study, we analyzed the adsorption of ivermectin with a high surface area and porosity charcoal. Isotherms were better fitted to the Koble-Corrigan model. The max...

Atlas oak, has been successfully used to remove phenol from aqueous solutions. The new material has been characterized by Scanning Electron Microscopy with Energy Dispersive X-ray spectroscopy (SEM/EDX), X-Ray Diffraction (XRD), and Fourier-Transform Infrared spectros-copy (FTIR); its textural properties have been also examined by nitrogen adsorpti...

This study explores the potential of the corozo fruit (Bactris guineensis) palm tree in the Colombian Caribbean as a source for porous carbon material. Its specific surface area, pore volume, and average pore size were obtained using N2 adsorption/desorption isotherms. The images of the precursor and adsorbent surface were obtained using scanning e...

The objective of this study is to develop a low-cost biosorbent using residual seeds of the Citrullus lanatus fruit for the removal of cationic dyes. Physicochemical parameters such as pH, adsorbent mass, contact time, and temperature were evaluated for their effects on dye removal. The biosorbent is composed of lignin and cellulose, exhibiting a h...

Hexavalent chromium (Cr(VI)) is a highly toxic form of chromium, which can be found in industrial effluents from various sectors, such as the metallurgical, tanning, and pigment industries. The presence of Cr(VI) in the environment is a concern due to its negative effects on human health and the ecosystem since it is carcinogenic, mutagenic, and ca...

Microbial lipids are a valuable source of potential biofuels and essential polyunsaturated fatty acids. The optimization of the fermentation conditions is a strategy that affects the total lipid concentration. The genus Nigrospora sp. has been the target of investigations based on its potential bioherbicidal action. Therefore, this study developed...

This study analyzed the viability of using malacoculture residue (Mytella falcata) to produce layered double hydroxides (LDHs) and for its subsequent use as an adsorbent. The CaAl/LDH-RE material was produced with calcium oxide from the residue and the CaAl/LDH-AP was produced with a commercial reagent. Both were used to remove methyl orange (MO) a...

This study focuses on the removal of phenol from aqueous media using Agouraï clay (Fes-Meknes-Morocco region) and Geulmima clay (Draa Tafilalet region). The characterization of the clay by Fourier Transform Infrared (FTIR) Spectroscopy, X-ray diffraction (XRD), N2 adsorption (BET), Scanning Electron Microscopy (SEM), and Thermogravimetric and diffe...

This work analyzes the adsorption of cadmium, a potentially toxic pollutant, on biopolymers synthesized from shrimp shells, as a promising new adsorbent. Spectroscopic analysis, such as FTIR, ATD/ATG, XRD, and SEM/EDX techniques, were used to characterize chitin before it was exposed to cadmium ions. Experimental data indicate that Cd(II) adsorptio...

Bisphenol A (BPA) is a diphenylmethane derivative often used as a building block of polycarbonate in the production of plastic and plastic additives. Different sectors of the chemical industry release daily high concentrations of BPA in treatment plants, leading to polluting the environment. Due to chemical characteristics, BPA is considered highly...

It is estimated that the growth of the population, the augmented expectancy of life, and the emergence of new pandemics will significantly increase the consumption of pharmaceutical drugs in the coming years. Due to its high efficiency, the group of fluoroquinolones, where the antibiotic ofloxacin hydrochloride (OFL) is found, is widely used to com...

The production and consequently the consumption of the pulp of the fruit of the palm tree Bactris guineensis occurs extensively in Colombia. The majority of the fruit is formed by waste (peel and core), producing high residual biomass. Thus, it is necessary to find a practical utilization of these peels, making the production and consumption of the...

The Calophyllum inophyllum species annually produces a large volume of cylindrical fruits, which accumulate on the soil because they do not have nutritional value. This study sought to enable the use of this biomass by producing activated biochar with zinc chloride as an activating agent for further application as an adsorbent in batch and fixed be...

Sewage sludge (SS) is a residue resulting from wastewater treatment, which is widely increasing due to population growth and economic development. Currently, there is a strong interest in finding feasible options for recycling SS in alternative applications like civil construction. The high-water content, as well as the presence of organic matter a...

In this study, the residual pods of the forest species Erythrina speciosa were carbonized with ZnCl 2 to obtain porous activated carbon and investigated for the adsorptive removal of the drug paracetamol (PCM) from water. The PCM adsorption onto activated carbon is favored at acidic solution pH. The isothermal studies confirmed that increasing the...

This study aimed to produce an eco-friendly bio-based polyurethane foam with mesquite gum (MG) and Sargassum sp. biomass (SA) to remove hexavalent chromium from an aqueous solution by adsorption. The synthesized PU foam presented a smooth and regular surface compared to the commercial polyurethane foam (CPF), the mesquite gum and sargassum presente...

The production and consumption of cassava (Manihot esculenta) occur in several places worldwide, producing large volumes of waste, mostly in the form of bark. This study sought to bring a new purpose to this biomass through producing activated carbon to use as an adsorbent to remove the herbicide Diuron from water. It was observed that the carbon c...

This paper describes the removal process via adsorption of paracetamol (PRC) and ketoprofen (KTP) on activated charcoal prepared from the residue of the fruit of Butiacapitate. Some adsorbent characterizations are carried out for a plausible analysis of the adsorption results and for the description of adsorption mechanism. Modelling investigations...

In this paper, the adsorption of the herbicide 2,4-D and the drug ketoprofen on wheat husks Fagopyrum esculentum treated with H2SO4 is experimentally and analytically analyzed. The adsorbent is fully characterized through some techniques such as FT-IR, SEM, and XRD. Adsorption tests are carried out to optimize the performances in terms of adsorbent...

The present review analyzed papers using adsorption that explore the removal of paraquat herbicide from aqueous effluents. Contamination and toxicology aspects of the paraquat are tackled as well. Analysis regarding the effects of process variables and textural proprieties on the paraquat adsorption is presented. The reported works found that the b...

In this study, the residual pods of the forest species Erythrina speciosa were carbonized with ZnCl 2 to obtain porous activated carbon and investigated for the adsorptive removal of the drug paracetamol (PCM) from water. The PCM adsorption onto activated carbon is favored at acidic solution pH. The isothermal studies confirmed that increasing the...

The study analyzed the potential of leaf powder prepared from the residual leaves of the species Sansevieria trifasciata, as a potential adsorbent for methylene blue (MB) removal. The equilibrium was reached fast for almost all concentrations after 60 min, obtaining the maximum capacity of 139.98 mg g −1 for 200 mg L −1. The increase in temperature...

The porous structure of ZSM-5 zeolite strongly affects the adsorption, especially when resistant compounds are present in the water, such as naphthenic acid in oil-produced water. In this sense, ME-ZSM-5 zeolite was synthesized by adding sodium alginate for later use as an adsorbent to remove naphthenic acid from synthetic water and real oil-produc...

Atrazine and diuron are two pesticide compounds with very low surface interaction capacity, whose adsorption efficiency remains a challenge in environmental remediation applications. In this work, statistical physics (sta-phy) modelling and density functional theory (DFT) calculations have explored several still unveiled mechanisms involved. A mode...

In recent years the funeral industry has drawn attention from the scientific community concerning the potential pollution of the environment and the urban environment. In this review, the pollution caused by the cemeteries and crematoria around the world was addressed. The traditional burial leads to the production of ions, in the form of organic a...

The species Hovenia dulcis has become a major issue for the Brazilian biome due to its high adaptation and accelerated propagation, putting the local biodiversity at risk. In this sense, this study sought to generate a new purpose for the fruits of this peculiar species. They were carbonized with ZnCl2 to produce porous activated carbon, which was...

A porous activated carbon from Hovenia dulcis was prepared using zinc chloride (ZnCl 2) as an activating agent and applied to remove diuron in aqueous solutions. The carbon presented a smooth and regular surface, with an area of 898 m² g-1 , narrow pores of average diameter equal to 1.242 nm, and volume of 0.296 cm 3 g-1. Adsorption was favored by...

Pharmaceutical compounds are a serious problem in the environment. They cause damage to the aquatic, animal, and human organisms and soon became considered emerging pollutants where their removal is extremely urgent. Among the techniques used, adsorption has been used with success, where several adsorbent materials, including those from residual bi...

The present review was carried out to analyze the works developed using the adsorption technology to remove the anti-inflammatory ketoprofen (KET). The main factors that inflated the KET adsorption were analyzed. It was found that, among the developed adsorbents, those from ZnAl/biochar, algae-derived porous carbon, and powdered activated carbon we...

The seed pods of the forest species Erythrina speciosa were pyrolyzed with ZnCl 2 to obtain porous activated carbon (Ery-AC) for adsorption purposes of Ibuprofen. The new material was microporous with a surface area of 795 m 2 g-1. The kinetic and isothermal studies were conducted at a pH of 3 and an Ery-AC dosage of 0.75 g L-1. The Freundlich and...

In this study, six statistical physics (sta-phy) models were used to further describe and enlighten the mechanisms behind the adsorption of a low interaction model molecule through the interpretations of the real and ideal gas. Density functional theory (DFT) was employed for the simulation of electronic structure and reactivity parameters (Eg, η,...

In this work, buckwheat husks (Fagopyrum esculentum) were modified by acid treatment and posteriorly employed to remove the ketoprofen in batch adsorption. The characterization results indicated that a more irregular surface with new empty spaces was generated after acid treatment. The adsorptive process was favored at acidic pH = 3. The dosage of...

In this research, a functionalization of Physalis peruviana biomass with H2SO4 and its application in the adsorption of ketoprofen and 2,2-dichlorophenoxyactic acid is reported. In particular, the adsorption properties of this biomass were improved through a sulfuric acid treatment to enhance its removal performance of organic molecules. Surface ch...

The PVSDM model was used for single and binary dye adsorption systems. This model is commonly used for adsorption in single systems, but this is the first time used in a binary mixture of dyes in the literature. To that end, a new adsorbent derived from Bauhinia forficata waste was created and described for eventual use in the treatment of a dye co...

O presente trabalho traz uma abordagem da importância do trigo no estado do Rio Grande do Sul e demonstra a atual posição e a produção da triticultura gaúcha, e no Brasil. Com a redução dos subsídios e a consolidação do MERCOSUL, a situação se agravou, a partir daí colocou-se em xeque o desenvolvimento da cultura de trigo no estado, bem como, no pa...

The species Sansevieria trifasciata is very widespread around the world both for its ornamental use and profusely spread among religions of African origin. The study analyzed the potential of leaf powder prepared from the residual leaves of the species Sansevieria trifasciata , as a potential adsorbent for methylene blue (MB) removal in a discontin...

Activated carbon prepared from grape branches was used as a remarkable adsorbent to uptake naproxen and treat a synthetic mixture from aqueous solutions. The material presented a highly porous texture, a surface area of 938 m2 g−1, and certain functional groups, which were key factors to uptake naproxen from effluents. The maximum adsorption capaci...

Schizolobium parahyba species can be found in all of South America, producing several residues that can be a major opportunity to develop activated carbon. This work presents the investigation regarding the development of a high specific surface activated carbon (981.55 m2 g−1) and its application in the adsorption of ketoprofen from the aqueous me...

Bark residues of the forest species Cedrela fissilis were physically and chemically modified with zinc chloride (ZnCl2) as an activating agent. The two modified materials were analyzed as adsorbents in removing atrazine and 2,4-D herbicides from effluents. Firstly, the precursor material and the modified ones were characterized by different techniq...

In this work, physical statistical models were employed to provide reasonable information regarding the adsorption of naproxen onto different activated carbons. The activated carbons were prepared from different biomasses (pitaya peels, jabuticaba peels, or grape residues from the winery process) using ZnCl2 as an activator. All the adsorbents were...

The pitaya peel (Hylocereus undatus) was carbonized in the presence of ZnCl2 to obtain a carbon-based adsorbent to remove the Metanil Yellow dye (MY) from colored waters. The characterization techniques confirmed that the material had morphological changes with the appearance of new irregularities and cavities. Besides, the alternative adsorbent wa...

The residual husks of the edible fruits of Psidium cattleianum were carbonized with FeCl3 as an activating agent and used as an adsorbent to remove the toxic herbicide. After the carbonization step, changes in the material’s structure were found. Activated carbon showed characteristics of microporous materials with a pore volume of 0.280 cm³ g⁻¹ an...

Biochar was produced from the sawdust of the wood forest species Cedrella fissilis and later used as an adsorbent to remove atrazine herbicide from aqueous media. Biochar showed high thermal stability, an amorphous structure, and a highly irregular surface, mainly composed of carbon-containing bonds. The isothermal curves confirmed that the increas...

This study used the bark of the forest species Campomanesia guazumifolia modified with H2SO4 to absorb the anti-inflammatory ketoprofen from aqueous solutions. FTIR spectra confirmed that the main bands remained after the chemical treatment, with the appearance of two new bands related to the elongation of the carbonyl group present in hemicellulos...

In this work, a novel and effective hydrochar was prepared by hydrothermal treatment of Prunus serrulata bark to remove the pesticide atrazine in river waters. The hydrothermal treatment has generated hydrochar with a rough surface and small cavities, favoring the atrazine adsorption. The adsorption equilibrium time was not influenced by different...

The residual bark of the tree species Campomanesia guazumifolia was successfully modified with H2SO4 and applied to remove the toxic herbicide 2.4-dichlorophenoxyacetic (2.4-D) from aqueous solutions. The characterization techniques made it possible to observe that the material maintained its amorphous structure; however, a new FTIR band emerged, i...

For the first time, the applicability of amethyst mining rejects as a novel photo-Fenton catalyst was evaluated. Catalyst characterization was analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), specific surface area (BET), and X-ray fluorescence (FRX). The effects of operating parameters, such as pH (2.0–4.0), catalyst dosage...

In this work, Diospyros kaki fruit waste was employed as a precursor material to develop a high surface area activated carbon, which efficiently removed the toxic herbicide atrazine (ATZ) from synthetic water solutions and river waters. The alternative activated carbon presented excellent characteristics and structure, including high values of spec...

In this work, jabuticaba (Plinia cauliflora) fruit peels were pyrolyzed in the presence of zinc chloride to generate a novel porous adsorbent to remove naproxen (NPX) from aqueous solutions. The maximum adsorption capacity of the activated carbon for NPX was 167.03 mg g⁻¹, achieved at 328 K. This remarkable result might be mainly assigned to the po...

Quaternary adsorption of Cu²⁺, Co²⁺, Ni²⁺ and Ag⁺ ions on an adsorbent obtained from the alkaline fusion of wastewater treatment sludge was investigated. Adsorption tests in both single-compound and quaternary systems were carried out and the analysis of adsorption mechanism was done by the application of a new quaternary model. This model was deve...

The production of the edible mushroom Agaricus bisporus occurs on a world scale, where tons are constantly produced. At the same time, this production generates a large amount of waste that needs to be adequately conditioned. Therefore, mushroom residues were used to develop activated carbon for the removal of 2,4-D—the developed adsorbent showed a...

Wheat husks (Fagopyrum esculentum) were modified by treatment with sulfuric acid. The precursor material (FEWS) and the modified material (TFEWS) were characterized by different techniques to identify the structural changes promoted by the chemical treatment. Subsequently, TFEWS was applied as an adsorbent to remove the 2,4-dichlorophenoxyacetic ac...

In this work, endocarp of the species Butia capitata was employed as precursor material to prepare a novel activated carbon with intrinsic properties to remove ketoprofen and paracetamol from water efficiently. The activated carbon presented a predominantly microporous structure, with an average pore diameter of 1.23 nm, a total pore volume of 0.44...

In this work, peanut (Arachis hypogaea) skin, a by-product generated by the agricultural production of its seeds, was employed as a precursor in the preparation of an adsorbent for the 2,4-D removal in water. The skins were treated with sulfuric acid and characterized by different techniques. The adsorption was favored at acid pH = 2 with pHpzc = 6...

Anthropogenic activities have severely affected biogeochemical cycles on a global scale, resulting in a drastic increase in environmental problems, intensified by wastewater generation containing high levels of pollutants. As it is known that water is precious yet limited, viable wastewater treatments must be developed. Adsorption is an environment...

Fruit wastes of the Ceiba speciosa forest species were employed as raw material for preparing activated carbon towards removing phenol from water. Concave cavities spread over the entire material surface were observed from characterization results, resulting in a high surface area, 842 m² g⁻¹. Adsorption isotherm and kinetic studies were performed...

In this work, a high porous activated carbon from Jacaranda mimosifolia was developed and employed for ketoprofen adsorption. After the pyrolysis process at 973.15 K, the material presented cavities with different sizes allocated on the particle surface. The material presented a pH at the point of zero charge of 4.1 with the best adsorption at pH 2...

In this work, comminuted seedpods of the forest species Luehea divaricata (LDPR) and Inga laurina (ILPR) were used as alternative and environmental-friendly adsorbents for the methylene blue (MB) removal from aqueous solutions. Batch adsorption experiments were carried out at the native pH of the solution (pH = 8.7), with curves of removal and adso...

Residual seed pods from the forest species Inga marginata and Tipuana tipu were used as biosorbents to remove the cationic dye gentian violet from diluted aqueous solutions. It was observed that the materials presented heterogeneous structural characteristics, with a predominance of amorphous regions formed by functional groups typical of hemicellu...

In this work, for the first time, Cordia trichotoma sawdust, a residue derived from noble wood processing, was applied as an alternative biosorbent for the removal of crystal violet by discontinuous and continuous biosorption processes. The optimum conditions for biosorption of crystal violet were 7.5 pH and a biosorbent dosage of 0.8 g L⁻¹. The bi...

This study investigates, for the first time, the applicability of seed pods from Capparis flexuosa as an alternative biosorbent to remove methylene blue and bright blue from aqueous medium using continuous and batch systems. The biosorbent was characterized by different techniques, whose particles presented rough surface and large pores and functio...

Pods of the forest species Caesalpinia echinata were used as an alternative adsorbent to remove bright blue (BB) and methylene blue (MB) dyes. The raw and acid-treated samples were characterized by techniques like SEM, XRD, and FTIR. The acid-treated pod sample was characterized by an amorphous structure containing several cavities, bumps, and func...

In this study, the chalice generated from the production of the Physalis peruviana fruit was subjected to a treatment with sulfuric acid and applied in the adsorption of 2,4-Dichlorophenoxyacetic acid (2,4-D). The precursor, and the treated material before and after the adsorption, were analyzed by different techniques. After the acid treatment, it...

In this work, an activated carbon sample with a high adsorptive performance for the herbicide 2,4-dichlorophe-noxyacetic acid (2,4-D) was prepared from queen palm endocarp (Syagrus romanzoffiana) by pyrolysis process. The activated carbon presented an XRD pattern related to carbon graphite and functional groups such as C-H, C˭O, O-H. The material p...