Question
Asked 27th Feb, 2017
Nicolai Raphael Krekiehn
Nicolai Raphael Krekiehn

Total internal reflection at metal?

Example Au:
real part of refractive index of Au for wavelength 700 nm is 0.13 , incident medium is Air (n_Air = 1).
Exists a critical angle? 
theta_crit = arcsin(n_Au / n_Air) = 7.5° is this correct?
Air

All Answers (1)

Surender Singh
CCS Haryana Agricultural University
Surf through the following web link for more insight on the issue..Best..
http://galileo.phys.virginia.edu/classes/531.cas8m.fall05/l7.pdf
Cite

Top contributors to discussions in this field

Nazaruddin Sinaga
Nazaruddin Sinaga
Arvind Singh
Arvind Singh
Rashid Nasrolahpour
Rashid Nasrolahpour
Maha F. Smaism
Maha F. Smaism
Rk Naresh
Rk Naresh

Similar questions and discussions

I am trying to simulate sputtering from a cylindrical target using RSD software. Can anyone help in creating racetrack for cylindrical target?
Question
1 answer
  • Asked 5th Jun, 2024
  • Sivakumar PeriyasamySivakumar Periyasamy
The target type is titanium; the height is 900 mm, the width is 70 mm, the race track height is 750 mm and the width is 50 mm.
Can we get individual Ti and O2 atoms or TiOx molecules from a rf magnetron sputtered TiO2(Oxide target) target ?
Question
6 answers
  • Asked 20th May, 2024
  • Dip MannaDip Manna
I deposited TiO2 thin film on Si substrate from a TiO2 oxide target using rf magnetron sputtering technique (only Ar plasma is used ). Can i expect individual Ti and O2 atoms are sputtered from the target ?
What are some low-hanging fruits in plasma physics?
Question
Be the first to answer
  • Asked 30th Mar, 2024
  • Chauncey NguyenChauncey Nguyen
What subfields of plasma physics would benefit from immediate, short-term research?
How to Deposit titanium nitride layer with x varies from 0.8 to 1.2 using sputtering coating ?
Question
4 answers
  • Asked 23rd Oct, 2023
  • Vemuri Sri Ranga Sai Praveen KumarVemuri Sri Ranga Sai Praveen Kumar
I am looking to deposit a single-layer titanium nitride layer with a sheet resistance of approximately 60 ohms and a layer of TiNx (x value should be in the range of 0.8 to 1.2).
The developed layer will have potential applications in buildings and facades. Could anyone suggest in which way the layer development is needed to process the deposition using the DC magnetron sputter coating system?
Why my target became rough after I performed reactive magnetron sputtering?
Question
3 answers
  • Asked 11th Aug, 2023
  • Research StudentResearch Student
I deposited TiN on SS 201 substrate by reactive magnetron sputttering. After the sputtering process patches appeared on the surface of my target - its surface got rough
What could be a possible reason for these patches??
In the Universe, all the objects (except running in vacuum) are orbiting other object(s)or moving in a circular path. Why?
Question
9 answers
  • Asked 2nd Jul, 2023
  • Chinnaraji AnnamalaiChinnaraji Annamalai
I think these phenomena follow the scientific facts defined in the classical mechanics, but not theories or definitions in Einstein's mechanics.
What are some materials with high refractive index, but transparent in visible and near IR?
Question
16 answers
  • Asked 16th Nov, 2015
  • Alexander S. SolntsevAlexander S. Solntsev
Silicon, gallium arsenide and other popular semiconductors have optical refractive index of above 3, but they are not transparent in visible range. Is there anything with similarly high refract index, but still highly transparent at least at the edge of visible spectrum, i.e. for the wavelength of 750 nm?
I'm looking for references related to the level of vacuum needed to prevent suspension of dust particles in air
Question
1 answer
  • Asked 10th Aug, 2017
  • Tjerk de GraaffTjerk de Graaff
To what pressure do I have to drop a chamber to ensure that airborne dust particles are dropped from suspension.
Regards
Tjerk

Related Publications

Development of empirical temperature and humidity-based degraded-condition indicators for low-tonnage air conditioners /
Article
Includes bibliographical references: p.165-171. Vita. Thesis (M.S.)--Texas A&M University, 1997. "Major subject: Mechanical Engineering".
View
View
Optimasi Penggunaan Lahan di Kecamatan Driyorejo Berdasarkan Ketersediaan Sumberdaya Air Christianingsih, Putu Gde Ariastita
Article
Full-text available
  • Sep 2012
Kecamatan Driyorejo difungsikan sebagai daerah penampung limpahan kegiatan dari Kota Surabaya. Perkembangan ini tidak diikuti oleh dukungan sumberdaya air yang memadai. Muncul gejala krisis air diantaranya banyaknya lahan pertanian yang dibiarkan tidak produktif, dropping sumberdaya air ke Desa Bambe serta penerapan sistem bergilir distribusi PDAM...
View
Got a technical question?
Get high-quality answers from experts.
Ask a question