How many force exist for lathe tool in lathe machine?

I have a python script to run Abaqus that worked perfectly fine with Abaqus 2021 version. Now that I have the 2023 version, none of my scripts work. I added a picture to show the error. Do anyone here know how to fix this issue? Most of them are related to the bonding type, i.e cohesive or TIE. The one attached here is appearing when using TIE.

The error says it is something wrong with line 541 which I believe make trouble for line 1863 due to the bonding type which consequently makes the file to crash.

As mentioned this script did work before the Abaqus upgrade.

Any ideas?

Dear Researchers,

As you know, it is possible to generate the code of modeling in SpaceClaim and FE analysis in Ansys. However, I do not know how can I connect the codes of these sections.

I Ansys Apdl, it can be generated completely but I do not know how can I do it in Ansys workbench.

I am a researcher who works on Abaqus and i am using parallel computing system (HPC)

I have very heavy files, and i just noticed that when i run them, ABAQUS is not using the full capacity of the memory.

it is very slow to the point it might take months to run a file!

Note: i have around 10 millions element in the mesh.

Is there anything to do for ABAQUS to make it actually use the full capacity of the memory!

Note: parallel computation option is turned on and it actually uses several cores but the problem it is not using the full capacity of each core.

See the screenshot!

it is using around 50 GB only out of 376GB.

How to increase this value!

Any help is appreciated!

Best,

Yasmeen

One or more objects may have lost some scoping attachments during the geometry update. You can identify these tree objects by filtering the tree using the Scoping option set to Partial.

PlugIn Error: Refresh failed.

PlugIn Error: Failed to import assembly from SpaceClaim. No bodies to transfer.

Unable to attach to geometry file.

Update failed for the Model component in AM Thermal Analysis. Error updating cell Model in system AM Thermal Analysis. View the messages in the Mechanical editor for more details.

for calculating the heat loss I have a formula qls=ut*st*(Tws-Ta)*(t2-t1)

where Ut is heat transfer coefficient

for calculating heat transfer coefficient we have to know about 1) thickness of tank copper and stainless steel 2) thermal conductivity of copper and stainless steel 3) thickness of tank foam 4) thermal conductivity of foam

I want to know about these for both mixergy and conventional hot water cylinder. could you please know anyone anything about this please let me know

answers will be appreciable.

regards

Siva Dasari

I need to design thermal management system for Lithium Ion Battery. For this purpose, I need to know the heat generation with respect to time.

HI,

i am working gas separation using flat sheet membranes and I am new to this topic. I tried to find the permeability of nitrogen in the membrane by varying the inlet pressure and measuring the corresponding permeate volumetric flow rate. i tried to plot a graph of pressure drop/thickness of membrane versus the flux and tried to find the slope of the graph to find the permeability. however, the permeability is very small and once converted to barrer it becomes even smaller. can anyone suggest me what I am doing wrong. Thanks in advance

In fluid dynamics, Bernoulli's principle states that an increase in the speed of a fluid occurs simultaneously with a decrease in static pressure or a decrease in the fluid's potential energy. According to this principle, can we say that the density of a fluid (i.e. incompressible and flows at low Mach number) is lower compare to the hydrostatic density? Roughly speaking, is there a difference between the density of a fluid and static liquid (for the same matter)? If "yes", What is the method of fluid density (let say dynamic density) measurement? I am not an expert in this field. Thak you very much for your answers in advance.

When I run the script with a particular mesh size I get the result but when I change the mesh size in python script to generate input function in Abaqus I get the following error, why?

***ERROR: in keyword *EQUATION, file "hom_single_mesh_0003.inp", line 1835:

Unknown part instance set TABLET-1."CT 61"

***NOTE: DUE TO AN INPUT ERROR THE ANALYSIS PRE-PROCESSOR HAS BEEN UNABLE TO

INTERPRET SOME DATA. SUBSEQUENT ERRORS MAY BE CAUSED BY THIS OMISSION

***ERROR: in keyword *EQUATION, file "hom_single_mesh_0003.inp", line 1835:

Unknown part instance set TABLET-1."CB 18"

***ERROR: in keyword *EQUATION, file "hom_single_mesh_0003.inp", line 1841:

Unknown part instance set TABLET-1."CT 559"

....................................................................................................................& so on