Fig 1 - uploaded by Gytis Mykolaitis
Content may be subject to copyright.
(a) Block diagram of coupled oscillators with a feedback controller, (b) circuit diagram of the feedback controller.
Contexts in source publication
Context 1
... general setup for damping the oscillations in a neuronal array is sketched in Fig. 1a. Here we consider a small array, composed of only three oscillators O1, O2, and O3. However, the analysis can be extended to larger arrays as well. The CN is a coupling node, in general, not accessible from the outside directly, but via some series resistor R g . The DN is an accessible damping node. * corresponding author; e-mail: ...
Context 2
... FC is the electronic feedback controller. The circuit diagram of the electronic feedback controller FC is shown in Fig. 1b. We emphasize that the controller FC is an essentially two-terminal device. OA is a general-purpose operational amplifier, e.g. NE5534 type device. C 0 is an adjustable value of the capacitor; should be selected to ensure R * C 0 T /2π (here T is the spike period). R 01 = R 02 = 1 kΩ, R 03 is an adjustable resistor to fit approximately ...
Context 3
... have been performed using an array, com- posed of three mean-field coupled electronic FHN type os- cillators, as shown in Fig. 1. The snapshots of the exper- imental signals are presented in Fig. 4. The stabilization experiments, shown in Fig. 4b, are in a very good agree- ment with the numerical simulations, presented in Fig. 3. ...
