Figure 7 - uploaded by Serdar Tan
Content may be subject to copyright.
XRD analysis of the pellet after deoxidation experiment. It can be seen that the main phases present in the deoxidized sample are FeTi, Fe 2 Ti and Ti.
Source publication
A study is carried out on the synthesis of Fe-Ti based hydrogen storage alloys, which could be produced cost-effectively for use in stationary applications. Although Fe-50 at.%Ti may be synthesized via melt route, such alloys require a lengthy activation treatment before they can be used for the storage purposes. This treatment may be in the form o...
Similar publications
The electrochemical alane production process was proposed for a feasible production of alane. The operation of process was difficult because of short circuit by a dendrite growth in the reactor. Therefore, characteristics of the dendrite growth in the process were investigated. We conducted the electrochemical alane production process using Teflon...
In order to study the property the V-based hydrogen storage alloys, Ni in the alloys was partially
substituted by Mo. The V2Ti0.5Cr0.5Ni1-xMox (x=0.02-0.08) hydrogen storage alloys were prepared by induction melting, and the effects of Mo content on the microstructure and electrochemical property were investigated systematically. The results show t...
The cubic phase alloys Ti2Nb1-xFex (x = 0.0, 0.4, 0.6) have been prepared by an arc melting method. The crystal structure and hyperfine interactions have been carried out using X-ray diffraction and Mössbauer spectroscopy, respectively. Room temperature 57Fe Mössbauer spectra could be fitted with one doublet and four doublets for the alloys and the...
The cold crucible levitation melting prepared LaNi3.2-xMn03Cox (x = 0.2 ∼ 0.8) series alloys, the system of Co substitution of Ni on the alloy structure, hydrogen storage performance and electrochemical properties. XRD analysis showed that the cast alloy by the La2Ni7 phase, LaNi5 phase and LaNi3 phase composition; PCT test shows that with the Co s...
La 0.8-xGd 0.2Mg x Ni 3.1Co 0.3Al 0.1(x=0, 0.1, 0.15, 0.2, 0.25, 0.3, 0.4) alloys were prepared by induction melting followed by annealing treatment at 1173 K for 8 h in Ar atmosphere. Phase structure analyses show that main phase is the Ce 2Ni 7-type phase and the phase abundance of Ce 2Ni 7- and Gd 2Co 7-type is 98.8% at the lower Mg content. Whe...
