Fig 9 - uploaded by Juhee Lee
Content may be subject to copyright.
Source publication
A numerical study has been conducted to investigate the aerodynamic characteristics and behavior of a wing-tip vortex around a three-dimensional symmetric wing (NACA0015) in the vicinity of the ground. The aerodynamic characteristics and the wing-tip vortex change as a wing approaches the ground as a result of two different phenomena: the ground ef...
Similar publications
For a wing in steady level flight, the lift distribution that minimizes induced drag depends on a tradeoff between wingspan and wing-structure weight. In 1933, Prandtl suggested that tapered wings have an advantage over rectangular wings due to this tradeoff. However, Prandtl’s solutions were obtained using assumptions that correspond to rectangula...
The goal of the paper is to propose a new type of ornithopter that avoids the mechanical difficulties of a flapping system. It uses a modified design of a cycloidal propulsor. The modification regards the special setting of the wings that is intended to help the formation of a stable leading edge vortex (LEV). It is known that the LEV is the main f...
The paper presents results obtained by the author for wing-body interference. The lift-curve slopes of the wing-body combinations are considered. A 2D potential model for cross-flow around the fuselage and a discrete vortex method (DVM) are used. Flat wings of various forms and the circular and elliptical cross sections of the fuselage are consider...
The objective of the present study is to carry out a numerical study of the flow around a NACA0021 modified wing by the incorporation of sinusoidal tubercles on its leading edge at a Reynolds number equal to 225,000. The SST k-ω turbulence model is used as closure to the incompressible governing equations. Runs have been performed for several attac...
A modified lifting line algorithm is considered as a low-cost approach for calculating lift characteristics of wings above stall. The model employs a numerical lifting-line method utilizing the 3D vortex lifting law along with known 2D airfoil data to predict the lift distribution across a wing. This method is expected to be of significant importan...
