Fig 8 - uploaded by S.s.J. Moy
Content may be subject to copyright.
Context in source publication
Context 1
... of the cast iron material required different stress- strain curves in tension and compression to be specified. This was achieved in ANSYS by using structural non-linear material de- fined paths. These required uni-axial tensile and compressive stress-strain relationships. The multi-linear tensile stress-strain relationship shown in Fig. 8 was used in the FE analysis. This was calibrated by fitting the relationship given in Eq. (1) (Burdekin and Swailes [4]) to the experimental stress-strain curves. The val- ues of 'a' and 'b' were found to be 5.2 and 1.4 ...
Similar publications
We report the use of the guidewire lasso technique for the removal of an embedded esophageal self-expanding metal stent (SEMS), following a failure of distal to proximal invagination by removal hook caused by stent incorporation. During a removal procedure of an embedded SEMS using the hook retrieval device, the strut fractured and the stent retain...
With improvements in the performance of optical equipment on spacecraft, the requirements for vibration isolation have become increasingly stringent. An efficient and reliable active hybrid control (AHC) approach used for an active-passive isolation single strut (APISS) is proposed in this paper. The APISS adopts an active-passive architecture in s...
Additive manufacturing enables the fabrication of strut-based lattices that consist of periodic representative volume elements (RVE) and can be used as cores in sandwich panels. Due to the design freedom provided by additive manufacturing, the lattice strut diameter may vary through the lattice. Thus, the diameter distribution can be adapted to the...
Strut graft is an important, commonly used method to increase nasal tip projection and rotation. This study discuss its benefit by prospective analysis of a group of patients in which strut graft was used and compare it with a control group using digitalized photographs. The aim of this study is to evaluate the benefit of columellar strut graft and...
This paper proposes a novel approach for the efficient simulation of the nonlinear performance of buildings with infilled RC frames under seismic loads. The proposed modeling framework can be particularly helpful for actual buildings with multiple stories and bays, for which the current methods can be cumbersome to implement, or inaccurate. This fr...
