Figure 1 - uploaded by Pınar CELEN
Content may be subject to copyright.
Source publication
Solar collectors are frequently used in domestic water heating applications. In the design stage, the positioning of solar collector with suitable title angle is important in order to utilize from sun energy efficiently. In this study, the effect of tilt angle of a solar collector located to Erzincan city on monthly/daily average radiation values,...
Similar publications
The study's purpose was to determine the efficiency, as well as the energy and exergy analysis of the vacuum tube solar collector when using a mixture of water with Fe3O4 nanoparticles and multiwall carbon nanotubes in the selected percentage ratio as the working fluid. By varying the concentration of Fe3O4 nanoparticles in the working fluid from 0...
Small sized absorber in a flat plate solar collector is beneficial in terms of cost and minimum heat losses. However, its detailed thermal performance compared to standard size collector is still not fully understood. There is a paucity of research to appreciate thermal performance of solar water heating collector with consideration of a small abso...
The compound parabolic concentrator is a promising technology for efficient solar irradiation exploitation at low- and medium-temperature levels. This collector type can be used in a series of applications, such as solar cooling, desalination, and industrial process heat applications. This work presents a novel compound parabolic concentrator that...
An indirect-type forced convection solar dryer implementing a phase-changing material (PCM) as the energy-storing medium was designed, fabricated, and investigated in this study. The effects of changing the mass flow rate on the valuable energy and thermal efficiencies were studied. The experimental results showed that the instantaneous and daily e...
In this study, the energy and exergy of the organic Rankine cycle driven by steel slag waste heat and solar energy were analyzed for various system configurations. In the system design, the technology of crushing waste heat pressurized hot smothering technology of steel slag rolls was considered. Subsequently, a regenerator was integrated into this...
