Figure - available via license: Creative Commons Attribution 3.0 Unported
Content may be subject to copyright.
Source publication
Alloy 6061 has an excellent corrosion resistance property. The main advantage of the Aluminium alloy is lightweight. The alloy may be high in strength and suitable for heat treatment. This article discusses the comparison between two different materials namely As-received Al6061 and AlSi10Mg of the component produced by Selective Laser Melting proc...
Similar publications
According to the material nature, aluminum alloys are widely applied in aerospace, construction, and automotive applications due to their characteristics of being lightweight, having good formability, and having good corrosion resistance. To further improve the degree of the lightweight quality, introducing a new material with high specific strengt...
This study aims to explore the wear performance of maraging 18Ni-300 steel, fabricated via laser powder bed fusion (LPBF). The building direction dependence of wear resistance was investigated with various wear loads and in terms of ball-on-disk wear tests. The effect of direct aging heat treatment, i.e. aging without solution heat treatment, on th...
The effects of Ag (0, 0.5, 1, and 2 wt%) content on the microstructure and mechanical properties of SLMed AZ61 Mg–Al–Zn alloy in the as-deposited and heat-treated conditions were investigated. The microstructure of SLMed AZ61 Mg–Al–Zn alloy is composed of α-Mg matrix and eutectic of α-Mg and Mg17Al12 phase at grain boundaries. The addition of Ag in...
Considering the high cost of powder, powder reuse is necessary for economic and sustainable selective laser melting (SLM). Since powder quality is a key factor in determining the mechanical properties of SLMed parts, it is essential to understand the effects of powder reuse on the powder quality and SLMed parts. In this study, we investigated the e...
The Co-Cr-Mo alloy is a biomaterial with very good corrosion resistance and wear resistance; thus, it is widely applied for knee replacements. The wear resistance is influenced by the amount of hcp phase and morphology of carbidic precipitates, which can both be altered by heat treatment. This study compares a conventional knee replacement manufact...
