Figure 2 - uploaded by Paraskevas Lerantzis
Content may be subject to copyright.
Source publication
In cases that the temperature of large surfaces needs to be measured, because measuring by conventional temperature equipment is time consuming, thermography is a fast and simple alternative solution. The most important feature that affects the amount of energy radiating from a surface, under stationary thermal conditions (fixed temperature), is it...
Similar publications
The effect of a paint layer on a heated thin stainless steel foil for heat transfer coefficient calculation is studied. The foil is cooled by a jet impact (Re=100 to 1000) on one side and it is observed by an infrared camera on the other painted side. The results show that the lateral conduction has an important role in heat transfer calculation an...
This paper reports the principles of design and the examined protective properties of liquid materials for shielding the electric, magnetic, and electromagnetic fields over a wide frequency range. The materials were made on the basis of iron ore concentrate and a pigment additive, with water-dispersed and geopolymer paints used as a matrix. The tes...
In cases that the temperature of large surfaces needs to be measured, because measuring by conventional temperature equipment is time consuming, thermography is a fast and simple alternative solution. The most important feature that affects the amount of energy radiating from a surface, under stationary thermal conditions (fixed temperature), is it...
