Figure 6 - uploaded by Mamoon Rashid
Content may be subject to copyright.
Source publication
![Figure 1. Zigbee Architecture (Zigbee Stack) Functions [31].](profile/Mamoon-Rashid-7/publication/360768527/figure/fig1/AS:1158253467697152@1653160554041/Zigbee-Architecture-Zigbee-Stack-Functions-31_Q320.jpg)
The rapid development of technology has empowered us to achieve resilient infrastructure to establish a sustainable ecosystem. The construction site is one of the highest risk jobs for accident-related fatalities and injuries globally. From the previous studies, it is concluded that untrained or inexperienced workers were responsible for 40% of wor...
Context in source publication
Context 1
... and Goggle Detection Mote, Worker Health Monitoring Mote, Gloves' Detection System, and Shoe Detection System are the components that are part of the accessories' detection and health mote. Along with these motes, an additional system is placed at the entrance of the site for identification to identify the worker using RFID technology, as shown in Figure 6. It helps to identify and restrict unauthorized persons entering the construction site. ...
Citations
... LoRa uses the frequencies 433 MHz, 915 MHz, and 920 MHz to transmit data. The frequency used in Indonesia and Japan is 920 MHz [77]- [79]. The payload of each transmission can range from 2-255 octets, and the data rate can reach up to 50 Kbps when channel aggregation is employed. ...
Electrical energy efficiency is a dynamic in itself
that continues to be driven by electrical energy providers. In this
work, long-range (LoRa) technology is used to monitor DC
motors. In the modern world, IoT is becoming increasingly
prevalent. Embedded systems are now widely used in daily life.
More can be done remotely in terms of control and monitoring.
LoRa is a new technology discovered and developing rapidly.
LoRa technology addresses the need for battery-operated
embedded devices. LoRa technology is a long-range, low-power
technology. In this investigation, a LoRa transmitter and a LoRa
receiver were employed. This study employed a range of cases
to test the LoRa device. In the first instance, there are no
barriers, whereas there are in the second instance. The results
of the two trials showed that the LoRa transmitter and receiver
had successful communication. In this study, the room
temperature is used to control DC motors. So that the DC
motor's speed adjusts to fluctuations in the room's temperature.
Additionally, measuring tools and the sensors utilised in this
investigation were contrasted. The encoder sensor and the INA
219 sensor were the two measured sensors employed in this
study. According to the findings of the experiment, the tool was
functioning properly.
Insights and recommendations for the next steps are provided in this paper to better harness technology innovation for sustainable development. Over the past several years, the global industrial environment has seen a significant transformation as a result of numerous technical discoveries, inventions, and improvements. With the development of the Internet of Things (IoT) in recent years, underwater wireless sensor networks (UWSN) have. In the current study, a thorough evaluation of the potential use of cutting-edge IoT technology over WSN is done. The term "Internet of Things" (IoT) describes how different physical items and gadgets are connected online. Last but not least, the study's findings about the difficulties in enabling technology and the best course of action for future improvement in attaining sustainability and an effective UWSN.
