Figure 1 - available via license: Creative Commons Attribution 3.0 Unported
Content may be subject to copyright.
Source publication
An efficient method for predicting the turbine start-up and shut-down flow parameters is presented in this paper. Due to start-up or shut-down usually lasting a large number of periods, simulations of such processes are highly demanding and long lasting. To alleviate this, a modified Harmonic Balance method is used, thus casting a problem into spec...
Context in source publication
Context 1
... reconstructed solution is presented in following figures. Figure 12 shows pressure comparison in probe VL2. It can be concluded that pressure from simulations shows good agreement with the experimental data as the trend in pressure drop matches between the two, suggesting the qualitative agreement between the simulated and real physical processes. ...
Similar publications
Accurately dividing the harmonic impact of each harmonic source on the PCC bus is an important prerequisite for implementing the ‘reward and punishment scheme’. At first, the equivalent circuit model of multi-linear load harmonic source in PCC bus is obtained by using circuit theory, and the method of quantifying the harmonic impact for multi-harmo...
Aiming at the complex situation of intensive harmonics/inter-harmonics in power signals, this paper proposes an analysis method based on improved all phase time shift phase difference method and ZoomFFT. Firstly, the Hankel matrix of the input signal is constructed, and the TLS-ESPRIT algorithm is used to obtain the frequency components in the sign...
Under harmonic condition, transformer loss is significantly higher than that of traditional calculation method. It is necessary to re analyze the resistance model of transformer winding in harmonic environment. In this article, the harmonic loss model of transformer winding considering skin effect and proximity effect is established, and the charac...
Vibration characteristics of packeted bladed disk is complicated. To study the vibration characteristics of the governing stage bladed disk of 660mw steam turbine, cyclic symmetry method is used to calculate the mode shapes. Fourier transformation of vibration distribution in the tangential and axial direction along the circumferential of the blade...
