Table 3 - uploaded by Apip Amrullah
Content may be subject to copyright.
Source publication
This study discusses about the synthetic fuel made from plastic waste using gasification method. The
instrument used is a simple one phase distillatory. Sample has been tested and analyzed at PT. Pertamina RU V Balikpapan laboratory and Department of Transportation Banjar District. The result shows that this fuel is more alike to diesel fuel type a...
Context in source publication
Context 1
... was tested at Department of Transportation, Banjar District. The result smoke of synthetic fuel and diesel fuel are shown Tables 3 and 4. The gas analyses of synthetic fuel and diesel fuel are shown on Tables 5 and 6. From tables 3 and 4, it shows that smoke result of synthetic fuel is less than diesel fuel based on the average of the tests. ...
Similar publications
This study investigated the influences of n-pentanol, n-butanol, and isobutanol on the calculated cetane index (CCI), density, boiling point of mid-boiling point (T50), flash point and pour point followed by studying individual effects of isobutanol, isobutanol + nitromethane, and 2-ethylhexyl nitrate (EHN). The simultaneous effects of isobutanol +...
Citations
... The effect of using a plastic oil mixture to reduce the level of exhaust gas emissions is lower [17], with a decrease in diesel engines and emissions in the form of NOx, smoke, carbon monoxide, and hydrocarbons [14]. Also, the amount of smoke levels of liquid plastic fuel is 19.73% compared to diesel, at 29.67% [23]. ...
Article Info This study analyzes the performance of the diesel engine in terms of power, torque, specific fuel consumption, and thermal efficiency using diesel and pyrolysis oil. The waste plastic oil (WPO) used in this research was produced through a pyrolysis process using raw materials from Low-density Polyethylene (LDPE) mixed with diesel fuel in volume ratios WPO10, WPO20, WPO30, WPO40, and WPO50. In addition, a performance test was carried out on the single-cylinder diesel engine test bench. The results showed that performing the diesel engine with the addition of WPO increased the average power and torque by 5% and 3%, thereby producing a higher heating value. Furthermore, the concentration of WPO also reduces the level of specific fuel consumption to be more efficient, with a decrease in thermal efficiency. In conclusion, plastic waste pyrolysis oil is a promising alternative fuel applicable to a diesel engine.
