Fig 4 - uploaded by Seiji Saikawa
Content may be subject to copyright.
Size distributions of spheroidal graphite on (a) Base, (b) 0.004Sb, (c) 0.02Sb and (d) 0.1Sb alloys. 

Size distributions of spheroidal graphite on (a) Base, (b) 0.004Sb, (c) 0.02Sb and (d) 0.1Sb alloys. 

Source publication
Article
Full-text available
The effect of minor addition of antimony (Sb) and rare earth metal (REE) on microstructure and mechanical properties in the ductile cast iron (FCD450, (JIS G5502)), especially the morphology of spheroidal graphite, were investigated by TEM technique for TEM samples prepared by a focused ion beam (FIB) method. The increasing of amounts of Sb increas...

Citations

Article
The solidification microstructure of spheroidal graphite cast iron was analyzed by electron probe micro analysis (EPMA) and scanning transmission electron microscopy (STEM), focusing on the distribution of Cu. EPMA and STEM results clarified the following tendency in the distribution of Cu in spheroidal graphite cast iron containing Cu within the pearlite matrix: (1) Cu–Sn–Mg enriched regions were distributed in the pearlite matrix, and (2) the distribution of metallic elements of Cu, Sn, and Mg in Cu–Sn–Mg enriched regions was not homogeneous, and a composite of the metallic and oxide phases was formed. EPMA with a field-emission electron gun (FE-EPMA) and FE-STEM apparatus with a silicon drift detector were highly effective in clarifying the distribution of Cu, compared with conventional EPMA employing a thermionic-emission electron gun (TE). The high-resolution observation using FE-STEM, and the combination with TE-EPMA, FE-EPMA and FE-STEM, are powerful tools for clarifying the distribution of Cu element in spheroidal graphite cast iron. This Paper was Originally Published in Japanese in J. JFS 91 (2019) 512–520. Minor corrections in abstract, main text, figure and table captions, and references were performed with translation from Japanese to English and proofreading by native speakers. Reference 18) was replaced from “H. Ito, I. Narita, H. Miyahara: Reports of JFS meeting, 170 (2018) 4.” to “H. Miyahara, G. Ito, I. Narita: J. JFS 91 (2019) 703–709.” Fullsize Image