Figure 2 - available via license: CC BY
Content may be subject to copyright.
Source publication
This paper presents the formation of the parasitic components that exist in the RF MOSFET structure during its high-frequency operation. The parasitic components are extracted from the transistor's S-parameter measurement, and its geometry dependence is studied with respect to its layout structure. Physical geometry equations are proposed to repres...
Similar publications
We derived the equation for the drain current of a short-channel MOSFET with nonzero differential conductance in saturation regime describing its nonlinear dependence on "extrinsic" drain bias and accounting for the parasitic and contact series resistances. This implicit equation could be numerically solved in the entire range of the drain biases....
In this work, the X-ray irradiation influence on the back gate conduction and its impact on the drain current characteristic of Triple-Gate SOI FinFET are investigated. The impact of X-ray irradiation was analyzed taking into consideration two different splits: unstrained and uniaxial strained devices. Comparing the p and n-channel transistors resp...
The transient parasitic bipolar effect in floating-body double-gate FinFETs with low-doped bodies is analytically modeled. The obtained analytical transient bipolar current and charge models have predictive power for various device structures. These models are applicable when the majority carrier concentration in accumulation conditions noticeably...
The gate resistance is a parasitic element in transistors for RF and millimeter-wave circuits that can negatively impact power gain and noise figure. To develop accurate device models, a reliable measurement methodology is crucial. This article reviews the standard measurement methodology used in the literature and proposes also an additional metho...
This paper presents an analytical modeling of a MOSFET during switching operation, aimed at determining the switching losses. Moreover it compares the theoretical results with experimental data. The switching losses are calculated for different DC link voltages and load currents. The stray inductances and capacitances of the MOSFET were considered...
