Fig 1 - uploaded by Ali Yilmaz
Content may be subject to copyright.
Schematic view of data acquisition.

Schematic view of data acquisition.

Contexts in source publication

Context 1
... hardware of the scintillation counter telescope constructed with two identical scintillator plates, called Tile 1 and Tile 2, set in a distance of 160 cm as seen in figure 1. Each counter box consists of a KURARAY organic scintillator plate (20 × 20 × 1.4 cm 3 ). ...
Context 2
... produced signal is digitized by the Domino Ring Sampler board (DRS4), developed by Ritt [12]. The Data Acquisition (DAQ) program is based on the setup schematically shown in figure 1. It is managed by a shell script that controls the two main C++ programs. ...

Similar publications

Preprint
Full-text available
An efficient anchoring method, explicitly developed for small sliders, has hitherto been missing in the practice of earthen architecture conservation. Furthermore, anchorage performance studies conducted so far, have failed to fully take into account the soil characteristics of certain targets. To address these concerns, the conservation project co...
Chapter
Full-text available
Nonlinear models of the combined motion of structures carrying liquid with a free surface for translational and rotational motion of the carrying structure were constructed based on the variational approach. Using some specific features this method was applied also for modeling structures with limited volumes of liquid for reservoirs of revolution....
Preprint
Full-text available
Classifying player actions from soccer videos is a challenging problem, which has become increasingly important in sports analytics over the years. Most state-of-the-art methods employ highly complex offline networks, which makes it difficult to deploy such models in resource constrained scenarios. Here, in this paper we propose a novel end-to-end...

Citations

... Alınan veriler Uçuş Zamanı (Time of Flight/TOF) metodu kullanılarak analiz edilmiştir. TOF metodu, birinci sintilatörden geçip ikinci sintilatöre ulaşan kozmik parçacığın ne kadar sürede geçtiğini hesaplamaya dayanır (Yilmaz 2019). Kozmik parçacıkların hızı yaklaşık olarak ışık hızında kabul edilirler. ...
Article
Full-text available
Bu çalışmada, Atatürk Üniversitesi Astronomi ve Uzay Bilimleri Bölümü ile Astrofizik Araştırma ve Uygulama Merkezi (ATASAM) bünyesinde ortak tasarlanan kozmik ışın (müon) dedektörünün kurulum aşamaları ve ilk sonuçları sunulmaktadır. Bu kapsamda ilk ölçümler, 21- 30 Mayıs 2022 tarihleri arasında Erzurum Atatürk Üniversitesi yerleşkesinde bulunan ATA50 Teleskobu yakınında yapılmıştır. Dedektör sintilatörleri, Zenite bakacak şekilde (0°) yerleştirilmiştir. Alınan veriler, Python ve ROOT programları ile analiz edilmiştir. Bu sayede, ilk veriler 1885 metre rakıma sahip Atatürk Üniversitesi yerleşkesinin kozmik müon akısı olarak elde edilmiştir. Bölgenin akı değeri, literatürden alınan farklı irtifalardaki akı değerleri ile karşılaştırılmıştır. Böylece, Doğu Anadolu Gözlemevi (DAG) için sürekli kozmik ışın ölçümleri yapacak bir istasyon kurulumunun ilk çalışmaları tamamlanmıştır.