Figure 1 - uploaded by Norain Rahim
Content may be subject to copyright.
Source publication
A new design of a simple dual-band and dual-polarised microstrip patch antenna is presented with a single feeding. Paper present two designs to make antenna compact without much alteration results. The proposed antennas are designed, simulated and fabricated and tested to be used in dual frequency bands which are GSM900 and 1800 bands. The Design I...
Context in source publication
Context 1
... copper act as a ground and it is etched on the bottom layer of the substrate. The basic geometry of the proposed microstrip antennas are shown in Figure 1 and Figure 2 and their dimensions illustrated in Table 1 and Table 2. Both proposed designs are fabricated as in Figure 3 and Figure 4. ...
Similar publications
In this paper, a high-performance dual-orthogonalpolarized antenna array, for 5G communication in 28 GHz band, is proposed offering the capability to support both horizontal and vertical polarization. In conjunction with a high isolation between the horizontal and vertical polarization (lower than -20dB; 22.5-30.1 GHz), four stacked patch antennas...
A new antenna structure comprising a semicircular microstrip patch alongside a small rectangular shape ground proximity fed by a microstrip line is simulated. On a thin substrate this antenna achieves in the range of 5.6-12.86 GHz an impedance bandwidth of almost 75%. Details of the antenna design and simulation results on the return loss and the E...
A new design based on sequential‐rotation arranged polarization conversion metasurfaces (PCMs) is proposed for reducing backscattering and improving radiation performance of circularly polarized (CP) patch antennas. The proposed antenna is composed of a conventional corner‐truncated patch antenna loaded with a PCMs. The configuration of the PCMs in...
In this paper, the circularly polarized rectangular microstrip patch antenna with asymmetric slits was proposed for Radio Frequen-cy Identification (RFID) applications. The investigation was done over the whole S-band frequency (2-4 GHz) and found favor with the operating frequency of 2.4GHz which is very much suitable for RFID applications. Circul...
This paper presents a compact, dual polarized bistatic (two closely spaced transmit and receive radiators) patch antenna with excellent interport isolation performance. The presented antenna system employs differential receive mode operation for the cancellation of self-interference (SI) to achieve very high interport isolation for 2.4 GHz in-band...
