Fig 1 - uploaded by Kundan Kumar
Content may be subject to copyright.
Proposed dual band SIW antenna geometry. (L = 18, W = 18, Lms = 5, Wms = 2.2, lcpw = 3.1, wcpw = 0.7 d = 1, P = 1.5, l1 = 1.7, l2 = l3 =2, r1 = 2, r2 = 2.3) (Unit: millimeters). 

Proposed dual band SIW antenna geometry. (L = 18, W = 18, Lms = 5, Wms = 2.2, lcpw = 3.1, wcpw = 0.7 d = 1, P = 1.5, l1 = 1.7, l2 = l3 =2, r1 = 2, r2 = 2.3) (Unit: millimeters). 

Source publication
Conference Paper
Full-text available
A novel design of dual frequency low-profile substrate integrated waveguide (SIW) slot antenna is examine in this article. The proposed antenna design consists of semi-ring loop radiator, square SIW cavity and shorting pin. The semi-ring loop radiating slot etched on broad wall of square SIW cavity to work as dual frequency of operation and shortin...

Context in source publication

Context 1
... SIW antenna is execute on Roger RT/Duroid 5880 dielectric substrate with loss tangent 0.0009, dielectric substrate height 0.787 mm, permittivity 2.2, and anatomized by commercial available EM software Ansoft HFSS. The proposed antenna is verse of square SIW cavity, semi-ring loop radiator, shorting pin and feed by 50 signal line as shown in Fig. 1. A radiating slot semi-ring loop shape etched on the broad wall of SIW cavity and excited by two different mode for dual frequency application. A shorting pin is used for improve the impedance matching and its consequence is shown 978-1-5386-0933-0/18/$31.00 ©2018 IEEE in Fig. 2. The mode analysis of proposed antenna is observe by ...

Similar publications

Article
Full-text available
A compact substrate‐integrated‐waveguide (SIW) monopulse slot antenna array with TE20 mode is proposed, manufactured, and tested in this communication. The TE20 mode electric field distribution is used in this antenna design. The phase difference required by the monopulse system is constructed by changing the orientation of the end of the top micro...

Citations

... 5-7 But, these antennas suffer from poor performances due to bidirectional radiation characteristics. Substrate integrated waveguide (SIW) based antennas [8][9][10][11][12][13][14][15][16][17][18][19] are a better substitute to provide good radiation characteristics in a planar structure. In References 8-12 linearly polarized radiation in single band, dual band and triple-band of frequencies is obtained. ...
Article
Full-text available
A novel design of dual‐frequency dual‐sense circularly polarized (CP) substrate integrated waveguide (SIW) cavity‐backed slot antenna is presented for dual‐band wireless communication systems. The proposed antenna consists of square SIW cavity, asymmetrical bow‐tie‐shaped cross slot and probe feed. Due to use of asymmetrical bow‐tie‐shaped cross slot, circularly polarized wave radiates at two different frequencies with opposite sense of polarizations. The RHCP radiation occurs at (10.45‐10.54) GHz (Lower band) and LHCP occurs at (11.26‐11.34) GHz (Upper band). Moreover, in each band, sense of polarization can be change by changing the feed position. The front to back radiation ratio (FTBRR) is more than 10.5 dB and cross polarization level is lower than −20 dB in both the bands.