Fig 1- - uploaded by Dr. Rajesh Mehra
Content may be subject to copyright.
Download
View publication
Pixel array with column level ADC  

Pixel array with column level ADC  

Source publication
Cite
Download full-text

Context in source publication

Context 1
... architecture of pixel may change according to application. Depending upon the application of device the circuit will change [9].The connection of column level ADC with pixel array is depicted in fig.1.As shown in figure that for every column of array one ADC is required. So, this type of ADC is called as column level ADC. ...

Similar publications

The block diagram of comparator
Conventional comparator with two tail transistors [17]
The circuit of proposed comparator
Schematic of, a The capacitor and effective resistors of PMOS...
+10 a The structure of the SCPG transistors used in the latch structure and...
Design of a Dynamic ADC Comparator with Low Power and Low Delay Time for IoT Application
Article
Full-text available
  • Mar 2022
In this paper, a low power and low delay comparator circuit for the IoT applications has been designed and analyzed. In the proposed comparator, two different voltage levels have been used for the preamplifier and latch sections to control delay and power consumption. To increase the difference between the outputs in the preamplifier structure, two...
View
Figure 1.1. ADC architectures, applications, resolution, and sampling...
Figure 1.4: Figure of merit (FOM) of the reported ADCs on ISSCC and...
Figure 1.5: Figure of merit (FOM) of the reported ADCs on ISSCC versus...
Figure 2. 1 Basic signal processing system [13]
+44 Figure 2.2: Simplified block diagram of an ADC
Design of 10 Bit Low Power Split SAR ADC Using 0.18µm CMOS Technology
Thesis
Full-text available
  • Apr 2019
In the era of all-mobile devices and the Internet of Things, power efficient solutions are required by new applications. Wearables and battery supplied systems are in high demand, asking designers to come up with new ideas for ultra-low power high performances data converters. Among all the possible architectures, SAR ADCs stand out because of t...
View
Fig. 1. Conventional SAR ADC block diagram. The Analog Input is Sampled...
Fig. 2. Input vs Output of a conventional SAR converter. After each...
Fig. 5. Analog Signal Processing block diagram, containing the...
Fig. 6. Register schematic. S4 to S1 are the adress bits which come...
+7 Fig. 7. Digital logic block containing a 4-bit counter to adress each...
A low-power 10-bit 6.66MS/s CMOS SAR ADC with built-in digital calibration dedicated to IoT applications
Article
Full-text available
  • Dec 2018
In this paper, an energy-efficient SAR ADC for IoT applications is presented. The proposed ADC relies on a built-in calibration circuit to improve accuracy and introduces an original DAC that merges the concepts of binary-weighted and C/2C arrays in order to achieve a favorable trade-off between area, accuracy and power consumption. The system cons...
View
Figure 1. Pipeline ADC architecture [1]. 
Figure 2. Op-amp topologies [4] (a) telescopic, (b) folded cascode with...
Figure 3. Folded cascode with NMOS input structure (a) complete...
Figure 5. (a) Conventional DDA structure [10], (b) The proposed CMFB...
+7 Figure 6. The proposed design of fully differential folded cascode op-amp.
Design of a low power CMOS operational amplifier with common mode feedback 1 for pipeline analog-to-digital converter applications
Article
Full-text available
  • May 2017
This paper proposes the design of a low-power operational amplifier (op-amp) for pipeline analog-to-digital converter (ADC) applications using 0.13-µm CMOS process. The folded cascode topology with NMOS input types is employed for the op-amp design due to a larger output gain as compared to the PMOS input types. Furthermore, the op-amp is d with de...
View
Figure 1. An example of a mixed-signal SOC.
Figure 2 Example of transfer curves of a 12-bit SA-ADC.
Figure 3. Maximum possible resolution of a charge redistribution SAR...
Figure 4. σ(ΔV T )(black square) and σ(Δβ=β) (◊) for a minimal nMOS...
+7 Figure 5. Self-testing and calibration architecture.
A Novel Built-in Self Calibration Technique to Minimize Capacitor Mismatch for 12-bit 32MS/s SAR ADC
Article
Full-text available
  • Dec 2015
This paper proposes a novel Built-in Self Calibration (BISC) technique for a 12-bit 32MS/s successive approximation register (SAR) analog-to-digital converter (ADC) using a single input to reduce the capacitor mismatch of the digital-to-analog converter (DAC) and to compensate the comparator input offset voltage. The proposed self-calibration schem...
View