Figure 6 - uploaded by Ankur Srivastava
Content may be subject to copyright.
Similar publications
This paper investigates and compares the effect of steel fibres obtained through recycling waste tyres (known as RTSF), and a commercially available hooked steel fibre (HSF), on plastic shrinkage cracking in self-compacting concrete. The volumetric deformations of the specimens, bleeding, and the mass loss have been quantified. Mixtures containing...
Citations
... Fluidised Bed UnknownTable 11. Unit process energies of composite recycling.Srivastava et. al, 2012. Howarth et. al, 2014. Witik et. al, 2013 ...
The necessity of high performance materials has become latent in high technology sectors such as aerospace, automotive, renewable energy, nuclear engineering and sports. The expanding impact on future manufacturing of the EU waste management legislation and increasing price of current waste management methods stress the importance of an efficient and sustainable way of recycling waste generated in the composites industry. Aerospace companies estimated that 30-50% of materials in aircraft production are scrapped due to the way it is manufactured. Companies need to pay for landfilling the composite materials that otherwise can be a valuable resource. In a view that looking at individual production waste outputs could maximise the material reuse or recycling capability, gaining information about the type of scrap materials could inform the development of composite reuse/recycling supply chain. This research paper focuses on understanding the scale of scrap created in individual composites manufacturing processes to assess its potential value in terms of reuse/recycle capabilities. A Material flow analysis based data collection workshop has been performed with four composite manufacturers. Through the case studies it has been identified that there are three fibre related waste outputs captured: dry fibres, fibre material sheet off-cuts, and curried composite off-cuts. The captured information allows for the material specification development. This allows bridging the gap between the manufacturers and the waste processors in composites to address the lack of infrastructure and lack of waste material specification barriers outlined by the Composites Strategy 2009.
This concluding chapter presents the cost-performance comparison of different fibres as well as their environmental impacts and sustainability. Future directions of research and developments on the use of fibres in composite materials have been pointed out and sources for further reading and information are listed.
