Table 3 - available via license: Creative Commons Attribution-ShareAlike 4.0 International
Content may be subject to copyright.
Source publication
The track circuits are very important equipments used in the railway transportation system. Today these are used to send vital information, to the running train, in the same time with the integrity checking of the rail. The actual track circuits have a small problem due to the use of the same transmission medium by the signals containing vital info...
Similar publications
In this research, the effect of rail vehicle carbody’s flexural modes on the ride comfort of an example high-speed railway vehicle is investigated. The vehicle is modeled as a rigid multi-body system, where the rigid body vertical, longitudinal, pitch, and roll degrees of freedom of the carbody and bogie frames and the rigid body vertical and roll...
Railway ballast, for which natural crushed stone aggregates have been generally used, is an essential track component for the distribution of train loads along the rails and sleepers to the roadbed. However, the use of natural crushed stone aggregate causes environmental destruction as well as dust production in train service. This paper evaluates...
Introduction. Every year, the amount of electric rolling stock with asynchronous traction motors is continuously increasing on the Russian railway network, since such traction drives have a number of advantages over drives with DC motors. One of the problems associated with the introduction of asynchronous motors and an increase in the mass of trai...
![Figure 1. ETCS Level 3 [10]](profile/Marko-Bursac/publication/336604110/figure/fig1/AS:814898397335555@1571298326661/ETCS-Level-3-10_Q320.jpg)
Modern rail transport systems must meet the reliability and availability requirements. Also, the high demands for high security and high speed rail networks in the 21st century determine the use of information communication technologies as one of the possible ways to achieve it. This paper presents an overview of the use of information communicatio...
The design and development of a high-performance 165 kVA, 750 V DC all-silicon carbide (SiC) traction converter for new generation light rail transportation systems (LRTSs) are described. In the design of the traction motor drive, the efficiency of the overall system is maximized and the line current harmonic content of the traction motor is minimi...
