Figure 7 - uploaded by Eduardo Alberto Perez Ruiz
Content may be subject to copyright.
Longitudinal Stress (S11) map for scratch test at 5 N. a) First scratch, b) third scratch, c) fifth scratch
Source publication
![Figure 1 Schematic illustration of the bending induced stresses [8].](profile/Eduardo-Perez-Ruiz/publication/327424976/figure/fig1/AS:667180622434308@1536079664517/Schematic-illustration-of-the-bending-induced-stresses-8_Q320.jpg)
Some methods of evaluation of mechanical properties have been used for the determination of properties in coated systems. These methods include the indentation test as well as the scratch test, which is equally easy to perform and regularly does not require special preparation of the test bodies. The scratch test has been carried out experimentally...
Context in source publication
Context 1
... comparing figure 5 and figure 7 it is possible to observe that with the increase of the normal load the width of the groove in each of the lines is increased. It is also possible to observe the same behavior described in figure 5, in which during the first scratching the highest stress value in the rear region was reached on contact with the indenter. ...
