Figure - uploaded by Heba Fayed
Content may be subject to copyright.
Source publication
This paper demonstrates a performance comparison for spectral amplitude coding optical code division multiple access (SAC-OCDMA) using different detectors at different transmission distances. The single photodiode detection (SPD) technique is used to reduce phase induced intensity noise (PIIN). Modified double weight (MDW) codes are used as signatu...
Context in source publication
Similar publications
Anodic titanium dioxide (TiO2) nanotube arrays on Ti foil were synthesized using
electrochemical anodization technique and annealed at 700 oC without annihilating the
nanotubular assemblies. The nanotubular structure was used to fabricate UV photodetection
device based on Metal-Semiconductor-Metal. The photodetection device exhibited UV-sensitive
p...
The bandwidth and saturation power of germanium photodetectors are two crucial parameters for implementing analog and microwave photonics circuits. In conventional schemes, it is hard to optimize these two parameters simultaneously, due to different requirements for the size of absorption region. We report the design and demonstration of a high-pow...
For a practical photodetector, fast switching speed and high on-off ratio are essential, and more importantly, the integration capability of the device finally determines its application level. In this work, the judiciously engineered Si3N4/Si detector with an open-circuit voltage of 0.41 V is fabricated by chemical vapor deposition methods, and ex...