Figure 1 - uploaded by Huy Nguyen
Content may be subject to copyright.
Source publication
This paper presents the control model of three phase grid connected photovoltaic generation
system with a new approach for reactive power regulation. The model contains a detailed
representation of the main components of the system that are the solar panels, DC/DC
converter, DC-link, a grid side three phase voltage source inverter (VSI) and outp...
Contexts in source publication
Context 1
... main circuit block diagram of the PV grid connected system is shown in Figure 1, including: ...
Context 2
... Power factor (PF) is controlled and given 1. The phase voltage waveform and three phase currents are shown in Figure 10. ...
Similar publications
![Fig 1.15. Panneaux photovoltaïques [9]](profile/Salim-Makhloufi/publication/282329908/figure/fig2/AS:669436553998357@1536617520955/Panneaux-photovoltaiques-9_Q320.jpg)
![Fig 1.16. Champ photovoltaïque [1]](profile/Salim-Makhloufi/publication/282329908/figure/fig3/AS:669436553986066@1536617520980/Champ-photovoltaique-1_Q320.jpg)
![Fig 1.17. Systèmes connectés au réseau [9]](profile/Salim-Makhloufi/publication/282329908/figure/fig4/AS:669436558209024@1536617521001/Systemes-connectes-au-reseau-9_Q320.jpg)
Photovoltaic systems are highly non-linear characteristics; their energy production depends on climatic conditions that are highly random. This makes the design of an optimized photovoltaic system difficult.
By improving the efficiency of solar panels, Grid-connected Photovoltaic systems promise to be the future of photovoltaics. However, connectio...
Los sistemas fotovoltaicos aumentan globalmente y la posibilidad de implementar esta tecnología en Colombia es alta debido a su geografía, por lo que es necesario comprender cómo funciona para mejorar su diseño. Una excelente herramienta para estudiar y diseñar sistemas fotovoltaicos es Matlab. Este informe presenta una breve descripción de los mod...
![Figure 6. Buck-Boost converter for PV application [48].](publication/338170386/figure/fig2/AS:840314994585601@1577358115349/Buck-Boost-converter-for-PV-application-48_Q320.jpg)
![Figure 7. SEPIC converter for the PV application [56].](publication/338170386/figure/fig1/AS:840314994577408@1577358115319/SEPIC-converter-for-the-PV-application-56_Q320.jpg)
Renewable Energy Sources (RES) showed enormous growth in the last few years. In comparison with the other RES, solar power has become the most feasible source because of its unique properties such as clean, noiseless, eco-friendly nature, etc. During the extraction of electric power, the DC-DC converters were given the prominent interest because of...
The main objective of this paper is to develop a simulation model of stand-alone solar photovoltaic (PV) system based on mathematical models. A maximum power point tracking (MPPT) algorithm based on incremental conductance method is applied to extract the maximum power from solar PV energy conversion system. A DC/DC boost converter allows the MPPT...
Citations
... This transmission is carried out using sinusoidal pulse width modulation (SWPM) and pulsed PLL coordinated voltage source inverter (VSI) connected to the electrical network. [11][12][13][14][15]. The strategies used for control have been described in the literature. ...
In this study, a three-phase grid-connected Photovoltaic system is demonstrated. A photovoltaic (PV) system that is connected to the grid, provides several benefits, including a topology that is simple, high efficiency and so on. Considering control scheme difficulty greatly enhanced because of all the regulatory requirements, which are maximum power point tracking (MPPT), coordinated with the supply voltage, harmonic drop as a current output, must be addressed at the same time. The DC/DC converter, solar panels, DC-link, three-phase voltage source inverter (VSI) on the grid, as well as output filters are all detailed representations of the essential components of the system in this model. Line current harmonic distortion should be reduced. A sophisticated control strategy with two PI controllers and MPPT is purposed in this paper to stabilize DC voltage. A robust phase- locked loop (PLL) synchronizes a grid-connected voltage source inverter with three phases. The simulation and practical findings reveal that the stability as well as efficiency of a three-phase grid connected PV system are high. Keywords- solar energy, grid-connected inverters, photovoltaic (PV), maximum power point tracking (MPPT).
