Fig 2 - uploaded by Md Razu Ahmed
Content may be subject to copyright.
Similar publications
To investigate the flexural strength of hot isostatically pressed nano 3 mol% yttria partially stabilised zirconia and conventionally sintered micro 3 mole% yttria partially stabilised zirconia. Methods: A total of 40 bar-shaped (2 mm × 4 mm × 16 mm) specimens were prepared from hot isostatically pressed nano 3 mol% yttria partially stabilised zirc...
Bed mattresses are rated as products to cause a fire hazard because of their very high heat release rate among indoor combustibles. In this study, fire growth rate and flame height were measured through a series of combustion experiments on a full scale in order to provide information regarding mattress fire characteristics. The experiments were co...
The Holos-Quad micro-reactor concept is proposed by HolosGen LLC to generate 22 MWt with a lifetime of approximately 8 effective full power years (EFPYs) for civilian applications. The design is based on a very innovative high-temperature gas-cooled reactor concept using four Subcritical Power Modules (SPMs) that fit into one commercial 40-foot tra...
Determination of the Atterberg?s limits is necessary for the classification of fine-grained soil. That limits can be determined according to the valid standard SRPS EN ISO 17892-12. Two methods are prescribed by the standard for determining the liquid limit: the Casagrande cup and the Fall Cone test, and one method for determining the plasticity li...
