Figure 2 - available via license: Creative Commons Attribution 3.0 Unported
Content may be subject to copyright.
Example of a transverse slope on a sidewalk (pedestrian)

Example of a transverse slope on a sidewalk (pedestrian)

Source publication
Article
Full-text available
The purpose of this research is to design an environmentally friendly pedestrian facility by visual perception. One of the most important facilitied is a road for pedestrians. We can see that the current expansion of roads has caused a reduction in green areas and many pedestrians are displaced, causing pedestrians are choosing to use private vehic...

Contexts in source publication

Context 1
... Table 1. can be seen the pedestrian path is suggested to have a width of at least 2 meters, in certain circumstances the width of the sidewalk can be planned according to the following minimum restrictions (see Table 1): Figure 2 explained the structure and slope is in accordance with the function, the load, and the material used. The sidewalk for pedestrian must be hardened with concrete blocks, asphalt pavement, and plastering. ...
Context 2
... pavement surface must be flat and have a cross slope of 2-4%, while for the longitudinal slope of the road and a maximum of 10%. This slope aims to avoid puddles on the pavement (pedestrian) so that it gives a bad impact for the pavement users, it can be seen Figure 2: The use of stairs is needed on a crossing bridge, crossings, and sidewalks which have a slope extending more than 10% [11]. The existence of stairs and ram will make it easier for pedestrians to go through the uphill area. ...

Similar publications

Article
Full-text available
Currently, there is a high activity in the construction of multi-storey residential buildings in large cities. This causes an increase in pedestrian flows and traffic intensity in various areas of cities, but most streets and roads are not designed for a given number of pedestrians and vehicles. In turn, this leads to a decrease in the safety of pe...
Article
Full-text available
A novel real-time infrared pedestrian detection algorithm is introduced in this study. The proposed approach leverages re-parameterized convolution and channel-spatial location fusion attention to tackle the difficulties presented by low-resolution, partial occlusion, and environmental interference in infrared pedestrian images. These factors have...
Article
Full-text available
Jalur pedestrian merupakan wadah atau ruang untuk kegiatan pejalan kaki melakukan aktivitas dan memberikan pelayanan kepada pejalan kaki sehingga dapat meningkatkan kelancaran, keamanan, dan kenyamanan bagi pejalan kaki. Kondisi eksisting pedestrian di Distrik Heram sebagian besar pedestrian tidak berfungsi sebagai wadah untuk pejalan kaki. Pedestr...
Article
Full-text available
Key frame extraction can provide evidence for traffic violation detection, which is essential to support administrative punishment. However, the existing key frame extraction methods failed to model context information in complex semantic cases, such as failing to yield to pedestrian. To address this problem, we have proposed a key frame extraction...
Conference Paper
Full-text available
Non-signalized pedestrian crossings are an important part of the road network where the trajectories of vulnerable road users intersect with the trajectories of motor vehicles. Since no equipment unequivocally regulates the right of way, both drivers and pedestrians must be especially careful when encountering a pedestrian crossing, i.e. crossing a...