Figure - available from: Mathematical Problems in Engineering
This content is subject to copyright. Terms and conditions apply.
Each component and coincidence signal waveform.

Each component and coincidence signal waveform.

Source publication
Article
Full-text available
In order to solve the difficulty in the classification of gearbox compound faults, a gearbox fault diagnosis method based on the sparrow search algorithm (SSA) improved probabilistic neural network (PNN) is proposed. Firstly, the gearbox fault signal is decomposed into a series of product functions (PFs) by robust local mean decomposition (RLMD). T...

Similar publications

Article
Full-text available
Arc fault in the three-phase load circuit may cause fire, resulting in production interruption and even worse, it will cause casualties. In order to effectively detect the arc fault in the three-phase circuit, series arc fault experiments of three-phase motor load and frequency converter were carried out under different current conditions. Firstly,...

Citations

Article
Background The bearing is an important component of mechanical transmission, and its condition is closely related to the safe operation of the equipment. However, the nonlinear vibration signal of the bearing leads to low accuracy of fault diagnosis because it is difficult to extract bearing characteristics.Method To solve this problem, a bearing fault diagnosis method based on variational mode decomposition (VMD) fuzzy entropy (FE) and improved deep belief networks (DBN) is proposed. Since the information on bearing characteristics is overlaid by strong noise, VMD is used to process the vibration signal and calculate the FE of the modal components. Then, an improved butterfly optimization algorithm (BOA) with a mixed strategy is proposed, and the improved BOA is applied to optimize the hyper-parameters of the DBN to obtain the optimized DBN model. Finally, the optimized DBN is used as a pattern recognition algorithm for fault diagnosis.ResultsThe two experimental results show that this method can effectively diagnose bearing faults. The diagnosis rates are 98.33 % and 100 %, respectively, which provide theoretical support for bearing fault diagnosis.