Figure 5 - uploaded by Tue Phan
Content may be subject to copyright.
Diagram of the pixel layout and photograph of the pixels in the TFT-EPD. (a) Pixel layout, (b) photograph of the pixels. The pixel pitch was 250 Â 250 mm 2 , which corresponds to a resolution of 101.6 ppi. The aperture ratio was 84.6%.
Contexts in source publication
Context 1
... TFT-EPD panel design/panel fabrication/ driving method 5.1 Panel design Figure 5a and b shows the diagram and photograph of the pixels in the TFT-EPDs. The pixel pitch was 250 Â 250 mm 2 , which corresponded to a resolution of 101.6 ppi. ...
Context 2
... TFT-EPD panel design/panel fabrication/ driving method 5.1 Panel design Figure 5a and b shows the diagram and photograph of the pixels in the TFT-EPDs. The pixel pitch was 250 Â 250 mm 2 , which corresponded to a resolution of 101.6 ppi. The aperture ratio was 84.6%. A storage capacitance of 5.22 pF was formed between the storage-line and drain electrode in order to improve the displayed images. The channel width (W) and channel length (L) of the pixel TFTs were 20 and 40 mm, respectively. Figure 6 shows a planar view of the TFT- EPD. The display area and number of pixels were 6 Â 6 mm 2 and 24 Â 24, respectively. The specifications of the TFT- EPDs are summarized in Table ...
Similar publications
The subgap density of states (DOS) in amorphous oxide semiconductor has strong influence on the stability of thin-film transistors (TFTs). Generally, the reduction in DOS is at the expense of the mobility of metal oxide TFTs. To solve the issue, a strategy of fluorine anion doping is proposed to control the subgap state of metal oxide. Using the st...
Using one binary oxide, a fully transparent thin‐film transistor (TFT)‐based transceiver circuit is presented. The proposed transceiver circuit is fabricated entirely using an atomic layer deposition process. Moreover, the proposed circuit presents two modulation schemes: frequency shift keying and ON/OFF keying. The fabricated TFTs exhibit saturat...
