Figure 2 - uploaded by Andreas Menzel
Content may be subject to copyright.
![Data integration process (c.f. [Wad02])](profile/Andreas-Menzel-3/publication/221444084/figure/fig5/AS:669546776113154@1536643799026/Data-integration-process-cf-Wad02.png)
Source publication
In this contribution, we deal with time-stepping schemes for geometrically nonlinear multiplicative elasto-plasto-dynamics. Thereby, the approximation in space as well as in time rely both on a Finite Element approach, providing a general framework which conceptually includes also higher-order schemes. In this context, the algorithmic conservation...
Similar publications
During a crash event, significant energy must be absorbed by kinetic energy-dissipating systems through material plastic deformation. Such systems are thin-walled steel tubes installed in specific places of the vehicle body to reduce the amount of forces transferred to occupants to a required safety limit and to minimise the cargo damage. The prese...
This paper describes a series of bending and compression tests to investigate the Class 1 or compact web slenderness limit for cold-formed rectangular hollow sections (RHS) for use in plastic design. Details of the test rig are supplied and the results given. The results show that the rate at which the rotation capacity decreases with increasing ax...
The shear compression specimen (SCS), which is used for large strain testing, is thoroughly investigated numerically using
three-dimensional elastoplastic finite element simulations. In this first part of the study we address quasi-static loading.
A bi-linear material model is assumed. We investigate the effect of geometrical parameters, such as ga...
The main objective of this paper is connected with computational modeling and metallographic investigation of the production process of cartridge brass casing for various stages of its forming. Moreover, the mutual correlation of the obtained results was carried out. Forming process belongs to the most advanced technologies in mechanical engineerin...
In this paper, a three-dimensional Finite Element (FE) model was performed to simulate the impact test of normalized carbon steel and aluminum specimens. The model specifications were developed according to ASTM E-23 standard requirements. Also the established FE model took into account all sources of non-linearity such as geometric, material and c...
