Figure 3 - uploaded by Alexander Martens
Content may be subject to copyright.
Source publication
The use of a universal grabbing tool can minimize the number of potential necessary special handling
tools in robotic applications. Furthermore it minimizes the handling effort by decreasing tool changing
times. The human hand can be seen as an optimized, universal grabbing tool. It is optimal in grabbing
and holding of things.
The ambition of this...
Similar publications
There are several environmental conditions under which human beings do not find conducive to work. In such circumstances, without a considerable amount of safety precautions like in the disposal of hazardous wastes, radioactive substances, remote handling of explosive devices and righting and hostage situations among others, work is impossible. So,...
(Short-video: https://youtu.be/9tLdJ3TaE6s )
A new robotic rehabilitation system for the upper limb is developed to provide a cooperative motor task executing by a pair of trainees/patients toward neuro-rehabilitation including human-human physical interactions. A balance seesaw task was created as an example of a cooperative motor task for enhanc...
Artiklen beskriver en række læringsaktiviteter, som over en periode på 15 år er blevet udviklet i samarbejde med besøgende elever, lærere og pædagoger i LEGO Lab, Institut for Datalogi, Aarhus Universitet. I aktiviteterne er LEGO Mindstorms robotbyggesæt blevet brugt til at bygge og programmere robotter, der kan
- lave gakkede robotgangarter,
- t...
Soft robots with dynamic motion could be used in a variety of applications involving the handling of fragile materials. Rotational motors are often used as actuators to provide functions for robots (e.g., vibration, locomotion, and suction). To broaden the applications of soft robots, it will be necessary to develop a rotational motor that does not...
Quadrotor is an unmanned aircraft which has vertical takeoff and landing (VTOL) capability. However quadrotor requieres a good control system to itself during flight. So, the aim of this research is to design and implement a control system on quadrotor using LQR method to obtain the best feedback gain K value in hover state. LQR is a method that ca...
