Table 2 - uploaded by Anirban Karmakar
Content may be subject to copyright.
Source publication
This paper presents a circular fractal patch antenna with a sharp band notched characteristics. The proposed fractal antenna gives 45% size reduction compared with a conventional circular microstrip patch (CCMP) antenna. The proposed antenna has the capability to reject 5.15 –5.825 GHz band assigned for IEEE802.11a and HIPERLAN/2. The simulated res...
Context in source publication
Context 1
... on the optimized parameters, a fabricated prototype of the proposed antenna is developed, as shown in Fig. 7(a). The dimensions of the antenna and the notch as obtained from parametric study are tabulated in Table 2. The measured and simulated VSWR of the antenna is shown in Fig. 7(b) which is performed using Zhode and Schwarz ZVA 40 VNA. ...
Similar publications
A new type of fractal‐shaped microstrip patch antenna for ultra‐wideband (UWB) applications and with sufficient rejection in the WLAN band is presented. The radiating patch is placed on a 1.6 mm thick low‐cost FR‐4 epoxy substrate and is fed using a symmetric coplanar waveguide. The size of the proposed antenna in terms of wavelength is 0.189λ0 × 0...
In this paper presents the design of a circular microstrip fractal antenna (CMFA) loaded with parasitic edge-coupled (EC) split ring resonators (SRR) and defected ground structure (DGS). The basic resonant structure is a circular patch antenna designed at 3.2 GHz on FR4 substrate with relative permittivity 4.4, and 1.6 mm thickness. One iteration o...
