Fig 13 - available via license: Creative Commons Attribution 4.0 International
Content may be subject to copyright.
CNC finishing machining of blade Finally, the surface quality of the blade after the adaptive CNC machining process is obtained based on the on-machine measurement and the three-dimensional (3D) morphology. The 3D morphology of the blade surface under the clamping force and the milled surface is measured to determine whether local damage occurs. The 3D white light interference surface topography instrument is used to measure the microtopography of the blade surface. The 3D white light interference surface topography instrument is based on the non-contact white light scanning interference principle. The device uses closed-loop feedback piezoelectric ceramics and high linear capacitance sensors to ensure that the precision testing is in the full range of 0.1-150 μm, the repeatability of the RMS is 0.005 nm, the resolution is 0.1 nm, and the surface roughness test accuracy is less than Ra 0.1 nm. The 10x lens group is used in this experiment.
Source publication
This study proposes an adaptive CNC machining process based on on-machine measurement to control the machining error of near-net-shaped blades. The multi-source and multi-process machining error transmission model of a near-net-shaped blade is established, and the reduction effect of the machining error transmission chain by the adaptive CNC machin...
Similar publications
Predicting the punching shear strength (PSS) of fiber-reinforced polymer reinforced concrete (FRP-RC) beams is a critical task in the design and assessment of reinforced concrete structures. This study utilized three meta-heuristic optimization algorithms, namely ant lion optimizer (ALO), moth flame optimizer (MFO), and salp swarm algorithm (SSA),...
Overall, a rapid increase in the thermal error of the spindle can seriously deteriorate the machining accuracy of the machine tool. A closed-loop thermal error control system was presented to stabilize the thermal error in machining processes. The closed-loop system employed an active cooling system as the actuator and relies on a thermal error mod...
The implicit locally one-dimensional finite-difference time-domain (LOD-FDTD) method is useful for designing plasmonic devices and waveguide structures. By using a large timestep size, the implicit LOD-FDTD method can reduce the computational time; however, this involves a trade-off with accuracy. To overcome this trade-off, we propose an error-con...
Adaptive CNC machining process is one of the efficient processing solution for near- net- shaped blade, this study proposes an adaptive computer numerical control (CNC) machining process optimization scheme based on multi-process machining errors data flow control. The geometric and mechanical models of the multi-process adaptive CNC machining proc...
In this paper, the control problem of a class I of underactuated mechanical systems (UMSs) is addressed. The considered class includes nonlinear UMSs with two degrees of freedom and one control input. Firstly, we propose the design of a robust integral of the sign of the error (RISE) control law, adequate for this special class. Based on a change o...