Figure 7 - available via license: Creative Commons Attribution 4.0 International
Content may be subject to copyright.
Source publication
The primary objective of the current fire protection system in high-rise buildings is to extinguish fires in close proximity to the detectors. However, in the event of rapidly spreading fires, it is more effective to limit the transmission of fire and smoke. This study aims to develop an IoT-based real-time pre-response system for high-rise buildin...
Contexts in source publication
Context 1
... entire digital building was constructed by using the generate_rooms() method to instantiate several Room class objects and then storing their instances in a Building class. The program structure of the Building class is shown in Figure 7. In addition to the verification system, the Building class also implements multiple functions, such as adjudge_location(), get_control_vex(), convert_room_id(), pre_control(), and ignite(). ...
Context 2
... entire digital building was constructed by using the gen erate_rooms() method to instantiate several Room class objects and then storing their in stances in a Building class. The program structure of the Building class is shown in Figur 7. In addition to the verification system, the Building class also implements multiple func tions, such as adjudge_location(), get_control_vex(), convert_room_id(), pre_control() and ignite(). ...
Similar publications
This paper numerically analyzes the influence of heat release rate (HRR) and longitudinal ventilation velocity on smoke distribution characteristics in a T-shaped roadway when the fire source was located upstream of the T-junction. The back-layering length, critical ventilation velocity, smoke temperature, and CO concentration in the main and branc...
