Fig 7 - uploaded by Dumitru Doru Burduhos Nergis
Content may be subject to copyright.
Source publication
Roll stands frames are the most important parts of a mill. This frame supports the work rolls and other devices or mechanisms that ensure lamination precision and mill productivity. The reaction forces created by metal deformation during rolling must be withstand by the frame. Therefore, when designing and executing mill frames, special attention m...
Contexts in source publication
Context 1
... dimensions can be also viewed in Fig. 8. By means of PAD tool a 72 mm thickness profile is created. After creating the 3D profile of a pillar, it can be copied by means of MIRROR tool on the other side of the base plate. Mirroring will be done by a plan created in the base plate middle which is parallel to the 15 mm x 25 mm profile created in Fig. 7. The supporting rib After creating the 3D profile of both pillars, the support rib will be created by means of STFFENER tool, as can be seen in Fig. 9. The rib created can be copied by means of MIRROR tool. ...
Context 2
... dimensions can be also viewed in Fig. 8. By means of PAD tool a 72 mm thickness profile is created. After creating the 3D profile of a pillar, it can be copied by means of MIRROR tool on the other side of the base plate. Mirroring will be done by a plan created in the base plate middle which is parallel to the 15 mm x 25 mm profile created in Fig. 7. The supporting rib After creating the 3D profile of both pillars, the support rib will be created by means of STFFENER tool, as can be seen in Fig. 9. The rib created can be copied by means of MIRROR tool. ...
Similar publications
This work was focused on studying the possibility of increasing the strength of non-heat-treatable sheet alloy Al2Cu1.5Mn (wt.%) by the joint addition of 1% Mg and 1% Zn. The effect of these elements on the structure and mechanical properties of the new sheet Al2Cu1.5Mn alloy designed for Al20Cu2Mn3 dispersoids has been studied by calculations and...
