Table 2 - uploaded by Zoran Stevic
Content may be subject to copyright.
-Assembly language (Motorola) procedures
Source publication
This study describes wiretapping method for camera and its monitoring codes. Analysis and decoding of specially protected ISI database includes temperature data of an object observed in the process.
Contexts in source publication
Context 1
... is based on elementary characters' transmission of both PC orders and camera data. In this purpose, a pair of basic assembly procedure was used 7 for transmission of each character into communication port's line -Procedure SendD and a procedure for a receiving data -Procedure RcvD (Table 2). ...
Context 2
... pixel on thermograph was represented with two bytes in inverted order (lower to higher byte) and data to each pixel represents its absolute temperature Every byte is a two hex digit format, a and b; .n, block length in bytes; I, hex digit ordinal numeral; H d, hexadecimal record (number); k, digit position in a hex number Table 5-Data conversion rules 528 J SCI IND RES VOL 69 JULY 2010 higher temperature. Main problems were to solve commands generation and data analyzing and interpretation. ...
Similar publications
The elastocaloric effect in magnetron-sputtered
Ni50.4Ti49.6 films of 20 μm thickness is
studied by means of uniaxial tensile tests and infrared thermography.
For the investigated films, the usable quantity of latent heat is about
7.2 J/g. When relieving the stress after tensile loading and subsequent
temperature equalization at strain rates larger...
Citations
... It is based on the detection of the infrared electromagnetic radiation that an object emits. The intensity of objects' infrared radiation is a function of its temperature, as well as of its surface characteristics (Andjelkovic et al. 2010;Ogarev et al. 2009;Pfautsch et al. 2012;Wang et al. 2013;Yuan et al. 2015). When the trees are in question, tissue areas with decay (less heat-conveying liquids) or cavities have a lower surface temperature in comparison to the healthy tissue, which is also in correlation with the tissue humidity (moisture content) and its density (Pfautsch et al. 2012). ...
Selected plants of white fir and lime, damaged during severe weather episode on the mountain Avala (Serbia) in summer 2014, were analyzed and characterized (including their spatial soil samples) by inductively coupled plasma optical emission spectroscopy (ICP-OES), infrared (IR) thermography, and microbiological method such as enumeration of cultivable microorganisms. The results obtained from chemical and microbiological analyses provided valuable information on possible biotic and abiotic stressors such as soil fungi and heavy metals, which could affect the health status of trees, while IR thermography visualized this status in a very specific and effective way. The results of ICP-OES analysis clearly showed that the investigated heavy metals (Cu, Zn, Pb, As, Cd, and Ni) were less likely crucial factors responsible for ruined health status of damaged trees. The role of soil fungi was not clear, since the results of microbiological analysis only provided evidence that their amounts in all investigated soil samples were within normal ranges as well as that their amounts in the corresponding samples of the uprooted trees were much greater than in the case of snapped trees. Therefore, further molecular characterization of microorganisms should be performed to identify if pathogenic species are present and clarify their role. Nevertheless, all used methods, especially IR thermal imaging as a totally non-invasive, fast and very comfortable technique, can be recommended as very useful in preventive screening of the trees’ health status and for early detection of tissue decay that usually hamper trees survival or resistance to extreme weather events.
... An example of a complete computer in a hermetically closed housing is shown in Fig. 19. Nexcom Company has released transport intended fanless computer-VTC-3300, for vehicles and fleet management [62]. ...
... Autori su pratili, a i sami učestvovali u istraživanjima vezanim za nove tehnologije materijala, tretmana otpada (plazma tehnologija), primene termovizije i dr. [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16]. ...
Abstratct – Science and development in the fields of engineering and technology help conserve natural resources through waste minimization, reduction of harmful waste, renewable energy sources, higher energy efficiency, recycling, treatment of land, water and air, etc.. This paper summarizes the application of new technologies in this field, and shares its results. In recent years, intensive investigations take place in the field of application of thermal imaging in the protection of trees. It turned out that there are great possibilities of application, especially in the prevention of destruction due to insect attacks, but also in the diagnosis of decay, cracks and other anomalies. On the old trees that are affected by decay, thermal imaging can indicate trouble spots, and in doing so there is no need for additional damage (which is necessary with other methods). Only when thermovision detects them, weak spots may be confirmed and accurately defined by using other, more or less invasive methods. The authors have conducted a series of experiments and compared the results with those obtained by sound scanner imaging (Arbot). Further confirmation (and additional quantification) is obtained by using most invasive method -measuring the resistance to penetration of the rotating pin (resistography). The results were a perfect match, with thermal imaging being at a great advantage for its noninvasive nature and great speed of diagnosis.
