Figure 9 - uploaded by Tejaswi Redkar
Content may be subject to copyright.
Source publication
grammar, and design issues that may need to be corrected. We recommend that you review your book three times, with each time focusing on a different aspect. Once you are satisfied with your review, you can approve your proof and move forward to the next step in the publishing process. To print this proof we recommend that you scale the PDF to fit t...
Similar publications
Shape transformation upon annealing of fused filament fabrication additively manufacturing structures is investigated as a one‐way shape memory strategy using commodity thermoplastics. Irreversible thermal strain, which is a measurement of shape transformation upon annealing, is shown to depend on both raster angle and layer thickness, both of whic...
3D printing or additive manufacturing (AM) is a technology that enables the fabrication of 3D data by depositing a thin layer of material layer-by-layer until a final product is produced. Recently, the application of metal-based material has been increasingly utilized. However, the price is expensive and limited to certain applications only.
Thus,...
Objective:
There is a continuous increase in 3D printing applications in several fields including medical imaging and radiotherapy. Although there are numerous advantages of using 3D printing for the development of customized phantoms, bolus, quality assurance devices and other clinical applications, material properties are not well known and prin...
Pune finds a significant place in the national as well as international scenario attributing to the educational institutes, industries and history. Pune Municipal Corporation has incorporated the Swach model, decentralized segregation and no open dumping as part of waste management. As per the recent reports approximately 17,000 tons of waste gener...
This thesis presents a comparative study between two silver nanoparticle inks that were deposited using a Drop-on-Demand (DoD) inkjet printer, aiming at finding a functional ink that can be used to print electrodes in Light-emitting Electrochemical Cells (LECs). To achieve this, a DoD inkjet printer was installed and an acquaintance with the printe...
