Figure - uploaded by Eren Işık
Content may be subject to copyright.
![1 Types of Flow Induced Vibrations at Steady Flow [1]](profile/Eren-Isik/publication/334174058/figure/tbl1/AS:776342043906050@1562105775701/1-Types-of-Flow-Induced-Vibrations-at-Steady-Flow-1.png)
Source publication
![1 Types of Flow Induced Vibrations at Steady Flow [1]](profile/Eren-Isik/publication/334174058/figure/tbl1/AS:776342043906050@1562105775701/1-Types-of-Flow-Induced-Vibrations-at-Steady-Flow-1_Q320.jpg)
Behavior of triangular plate over constant flow is studied for the mandatory thermal design project with multidiscipline case which is known as fluid-structure interaction. General purpose of this project is to get learn FSI and to improve analysis skills. Two-way coupling with force and displacement transfer is the main setup during the computing....
Similar publications
Ionic liquid electrolytes (ILEs) have become popular in various advanced Li-ion battery chemistries because of their high electrochemical and thermal stability, and low volatility. However, due to their relatively high viscosity and poor Li+ diffusion, it is thought large concentration gradients form, reducing their rate capability. Here, we utilis...
This paper presents an innovative and efficient numerical approach for predicting wind induced dynamic responses of a tall building. The method uses an uncoupled fluid structure interaction (FSI) approach, where wind flow data obtained from a validated Computational Fluid Dynamics (CFD) analysis was used to obtain structural responses of the 184 m...
In the numerical simulation of flow-induced vibration using two-way fluid-structure interaction (TW-FSI) method, it is usually limited by mesh deformation, and consumes a lot of computing resources. These problems can be avoided by adopting acoustic-structure based one-way FSI (ASOW-FSI) approach. The purpose of this work is to explore the applicab...
The fluid-structure interaction (FSI) program were used to simulate the condition that inflated membrane structure transport process in incoming flow. A comparison between the results from numerical simulation and from the ground simulation test was used to validate the computational method. Due to the analysis of flow field and membrane structure’...
Knotless polyethylene (PE) netting is widely used in fisheries because of its excellent hydrodynamic performance and low cost. Netting deformation and the surrounding flow field distribution play an important role in determining the hydrodynamic characteristics of netting in moving water. In order to investigate the effect of solidity ratio and att...
